Theory · D1+E Licence - Minibus with Trailer · Module 3 of 13
You learn to calculate the permitted masses and dimensions of your minibus with a trailer and relate them to technical limits, axles and route restrictions. You answer questions on projecting loads, turning circles and speed limiters by applying the rules specific to passenger transport.


Distinguish your vehicle’s actual weight from the weight you are allowed to carry.
| Term | What you count |
|---|---|
| Unladen mass | Equipped vehicle with full tanks |
| Mass in running order | Unladen mass plus standard driver; on buses, standard attendant if carried |
| Laden mass | Actual weight with people and load |
| MMA | Maximum authorised mass for driving laden |
Exam trap: Wrong: unloading changes your MMA. Right: it reduces laden mass; your MMA stays unchanged.

Check how much weight your minibus receives through the coupling too.
Exam trap: Wrong: you count the coupling load twice. Right: when weighing the coupled combination, add the axle loads of both units.

Your licence does not increase the weight your minibus can tow.
| Trailer brakes and towing vehicle | Limit you must check |
|---|---|
| Overrun brake: ordinary minibus | Towing vehicle’s MMA; maximum 3,500 kg |
| Overrun brake: off-road towing vehicle | 1.5 times its MMA; maximum 3,500 kg |
| Continuous braking: category M towing vehicle | Same limits as with an overrun brake |
| Unbraked trailer | Half the towing vehicle’s unladen mass increased by 75 kg; maximum 750 kg |
Exam trap: Wrong: D1+E lets you tow any weight. Right: always respect technical and coupling limits.

You must meet every weight limit at the same time.
Exam trap: Wrong: a lightly loaded axle compensates for an overloaded axle. Right: respect every axle’s maximum.

Count your axles and check your vehicle’s classification.
| Single axle and vehicle | Maximum |
|---|---|
| Driven: general rule | 12 t |
| Non-driven: general rule | 10 t |
| Driven: class I bus under Regulation 107 | 13 t |
| Driven: class II or III bus under Regulation 107 | 12.6 t |
Exam trap: Wrong: you count twin wheels as two axles. Right: they still form one axle.

General axle tables do not increase the limits authorised for your minibus.
Exam trap: Wrong: a tandem within its group limit means every axle is within its limit. Right: check the authorised maximum for each axle too.

Check your trailer’s tandem weight against its own authorised limits.
Exam trap: Wrong: a higher general table limit lets you exceed your trailer’s group limit. Right: follow the group maximum in its technical data and check both axles.

Check the weight of your trailer’s triaxle group and each axle.
Exam trap: Wrong: you apply the group maximum to each axle. Right: it applies to all three together; also check each axle’s authorised maximum.

Check your bus’s axles and classification before choosing its maximum weight.
| Two-axle bus classification | General maximum |
|---|---|
| Two-axle bus, class I | 20 t |
| Two-axle bus, classes II and III | 19.50 t |
Exam trap: Wrong: holding D1 automatically gives your bus a particular class. Right: check your vehicle’s classification before choosing its maximum.

General road-train maxima do not replace your minibus’s own limits.
Exam trap: Wrong: all the combination’s remaining mass is available for towing. Right: also check the MMR and the trailer’s authorised mass; for a centre-axle trailer, apply its MMR definition.

Technology weight increases apply only under the stated conditions.
| Technology: only rows with the relevant note | Increase for its extra weight |
|---|---|
| Alternative fuel | Up to 1 t |
| Zero emissions | Up to 2 t |
Exam trap: Wrong: an alternative-fuel engine freely allows more luggage. Right: the increase covers the technology’s extra weight, in applicable rows.

Check your combination’s width with its load and the space along your route.
Exam trap: Wrong: meeting the general width limit guarantees passage everywhere. Right: also check route restrictions and available space.

Measure your combination’s highest point, including luggage and accessories.
| Vehicle | Maximum height including load |
|---|---|
| General rule | 4.00 m |
| Class I urban bus | 4.20 m |
Exam trap: Wrong: any bus in a city allows 4.20 m. Right: you need class I classification and must respect road restrictions.

Distinguish your minibus’s length from the length of your whole combination.
| Vehicle or combination | Maximum length |
|---|---|
| D1 towing vehicle | 8 m |
| Two-axle rigid bus: general rule | 13.50 m |
| Rigid bus with more than two axles: general rule | 15.00 m |
| Articulated bus | 18.75 m |
| Bus with trailer, including trailer | 18.75 m |
| Separate trailer, subject to combination maximum | 12.00 m |
Exam trap: Wrong: 8 m limits your whole combination. Right: it limits the D1 towing vehicle; check the combination maximum separately.

Measure your coupled combination and include removable accessories.
Exam trap: Wrong: adding nominal lengths is enough. Right: measure the coupled combination, including the space between units.

Check the space your whole combination needs when you turn.
| Following the circle: vehicle | Maximum projection beyond side plane |
|---|---|
| Rigid M2, M3 and N | 0.80 m |
| Articulated M2 or M3 | 1.20 m |
| N with retractable or load-relieving axles raised | 1.0 m; this exception excludes your M minibus |
Exam trap: Wrong: you take 12.50 m as the outer diameter. Right: it is the outer radius.

Check permitted projections and your combination’s total length separately.
Exam trap: Wrong: a permitted projection can exceed your combination’s maximum length. Right: check the total length with the load; you must stay within the ordinary combination maximum.

Measure the load from one outer edge to the other.
| Unit carrying the load | Side projection |
|---|---|
| Minibus | Not permitted |
| Trailer | Only under the side exception in “Projecting loads and their marking” |
Exam trap: Wrong: you measure only the body and forget the projections. Right: measure from edge to edge of the load, counting both sides.

Include marked loads when checking total length and signs along your route.
Exam trap: Wrong: marking the projection lets you exceed R-203. Right: include the marked load when measuring; if you exceed the signed length, choose another route.

If an indivisible load inevitably exceeds maxima without an exception, you need prior authorisation.
| Authorisation or capacity | What you must distinguish |
|---|---|
| Supplementary road-use authorisation | Allows special road use under its conditions |
| Transport authorisation | Allows you to operate transport services when required |
| Technical capacity | What the vehicle’s construction allows |
Exam trap: Wrong: you choose one journey and call the load indivisible. Right: justify that it cannot be divided without unnecessary cost or damage risk; if it inevitably exceeds the maxima without an exception, obtain supplementary authorisation beforehand.

For special transport, prepare your route and comply with your authorisation.
| Group 1: case or authorisation | Condition you must meet |
|---|---|
| Width over 3 m or length over 20.55 m | Escort behind on autopistas and autovías (motorways), at least 50 m away; ahead on other roads |
| Conventional road: below half its general speed limit | Another escort behind, at least 50 m away |
| General authorisation | Maximum 70 km/h |
| Specific authorisation | Maximum 60 km/h; notify each journey the previous day |
| Exceptional authorisation | Authorised speed, maximum 60 km/h; notify each journey the previous day |
| Width over 5 m | Traffic officers required; notify each journey at least 72 hours beforehand |
Exam trap: Wrong: the authorised maximum removes every other restriction. Right: for group 1, authorisation conditions take precedence; for speed, also respect any stricter ITV limits.

Compare each mass sign with the weight you actually carry.
| Sign | What you must compare |
|---|---|
| R-201 | Laden mass of your vehicle or combination |
| R-202 | Mass each axle transmits through all its wheels |
Exam trap: Wrong: you compare R-201 with MMA or R-202 with an average. Right: compare actual total mass or each axle’s mass, respectively.

Compare your combination’s full dimensions with the signs along your route.
| Sign | Dimension you must check |
|---|---|
| R-203 | Maximum vehicle or combination length, including load |
| R-204 | Maximum width, including load |
| R-205 | Maximum height, including load |
Exam trap: Wrong: meeting the general maximum lets you ignore a stricter sign. Right: you cannot pass if your dimension exceeds the signed figure.

Your minibus’s speed limiter does not replace road speed limits.
| Vehicles covered by the rule | Limiter setting |
|---|---|
| Passenger M2 and M3, at least four wheels, design speed exceeding 25 km/h | Must not exceed 100 km/h |
| Goods N2 and N3 | 90 km/h |
Exam trap: Wrong: the limiter always lets you drive at 100 km/h. Right: respect the driving speed limits for your minibus with trailer.

Check category, registration date and use before deciding whether your vehicle needs a limiter.
| Vehicle category | Registration date you must check |
|---|---|
| M2; M3 over 5 t and up to 10 t | From 1 January 2005 |
| M2; M3 over 5 t and up to 10 t | Between 1 October 2001 and 1 January 2005: requires the stated Euro 3 values |
| M3 over 10 t | From 1 January 1988 |
Exam trap: Wrong: driving in a city exempts you from the limiter. Right: that exemption requires exclusive use for public services in urban areas. Other exemptions cover the stated military, law enforcement, civil protection, fire and other emergency services, and scientific road tests.
Cross-check the legal configuration against the documentation and actual mass distribution.
Include the extremities of the load when checking the combination’s maximum dimensions.
Compare the correct measurement with the figure on the sign.
Mark it as read and you will see your progress on the theory list.