Theory · D1+E Licence - Minibus with Trailer · Module 10 of 13

Driving techniques for a minibus with a trailer

You learn to prepare and drive your D1+E combination with anticipation, smoothness for your passengers and control of its entire path. You mentally practise turns, overtaking, descents, reversing and parking, using the figures and manoeuvres you need to recognise in the test.

25 min read25 sectionsReviewed Nov 3, 2026
A green minibus towing an orange trailer travels in the right-hand lane of a Mediterranean rural road.
Controlling the path of the vehicle combination

1Prepare the combination and route

A driver studies a map beside a parked minibus with a trailer, with a road and an arched bridge in the background.
The key idea

Plan your route and check the minibus and trailer before setting off.

Remember

  • Plan using your actual dimensions and weight, including the load.
  • Check the coupling lock and electrical and brake connections.
  • Retract and secure supports; check that cables can move without catching.
  • Check tyres, lights and brakes on both vehicles.
  • Adjust your seat, mirrors, head restraint and seat belt before moving.
  • Wait until everyone finishes boarding or alighting; close the doors.

Exam trap: Wrong: Checking the minibus is enough. Right: Check the trailer too; fix safety faults before driving.

Read the full explanation
  • Before setting off, study the route taking account of the actual dimensions and mass of the combination, including its load. Identify access points, low-clearance passages, restrictions and space for turning; also plan where you can legally stop or turn round if you encounter a passage you cannot get through. A route suitable for the minibus on its own may be unsuitable for the combination.
  • Check that the coupling is closed and locked, and check the electrical connections and the connections for whatever braking system the trailer has. Check that the support wheel or other supports are retracted and secured, and that cables and lines can move with the articulation without dragging or becoming trapped. You study the full procedure in «Coupling and uncoupling the trailer». [RGCond, Annex V, B.3.6-8](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481).
  • Check the tyres, lights and brake operation on both units; check the pressure gauges and vehicle warnings before moving off. A minibus in good condition does not make up for a defective trailer. If you detect a fault that compromises safety, resolve it before driving; «Maintaining the minibus and its trailer» covers these checks in detail.
  • With the vehicle stationary, adjust your seat, mirrors, head restraint and seat belt, and familiarise yourself with the retarder and parking brake controls. Check that passengers have finished boarding or alighting and that the doors are closed before moving off or resuming driving. Learn the reference points for the test combination without automatically applying them to another vehicle. [RGCond, Annex V, B.3.6-8](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481).
  • See «D1+E licence: requirements, tests and validity» for the driver requirements.

2Load and dynamic behaviour

A minibus travels to the right towing a trailer shown in transparent cutaway, with suitcases resting low down and secured with straps.
The key idea

Distribute and secure your load properly to keep the combination stable.

Remember

  • Secure the load and check doors and fastenings.
  • Spread weight without overloading axles or concentrating it on one side.
  • Respect coupling weight limits and the limits of the combination.
  • Put heavy luggage in the low storage areas provided.
  • Anticipate braking and turns with liquids or objects that can move.
  • Use the trailer for luggage; never carry passengers inside.

Exam trap: Wrong: Smooth driving makes a loose load safe. Right: Position and secure the load properly.

Read the full explanation
  • You must position and secure the load and its accessories so that they do not fall, drag, move dangerously or compromise stability. Check doors, fastenings and load protection and support equipment before moving off. Smooth driving reduces forces, but it does not make a poorly secured load safe. [RGC, art. 14](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a14).
  • Know how passengers, luggage and loads are distributed between the minibus and trailer and across their axles. Avoid concentrating weight on one side or loading in a way that overloads one axle or takes too much weight off another. Observe the permissible vertical coupling load and the technical and authorised limits; you study the mass tables in «Maximum dimensions and masses».
  • Place heavy luggage in the low storage areas intended for it: a high load raises the centre of gravity and reduces your safety margin against overturning when you turn or change course abruptly. Do not allow loose objects that could be thrown towards passengers when you brake. You need both correct positioning and secure restraint to keep the combination stable and protect people. [RGC, art. 14](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a14).
  • With liquids or objects that can move inside their containers, anticipate braking and changes of direction: their movement can prolong or alter the combination's response. Do not become complacent with an empty vehicle either; the available grip changes and the sides remain exposed to the wind. Always adapt your technique to the type of load and vehicle. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45).
  • See «Safe loads and luggage» for positioning and securing luggage; use the trailer for luggage and do not carry passengers in it. [RGC, art. 10](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a10).

3Look ahead and check blind spots

A driver checks the mirror of a green minibus with an orange trailer stopped beside the right kerb, with a cyclist close to its right side.
The key idea

Look ahead, nearby and in your mirrors to spot danger early.

Remember

  • Alternate between looking far ahead, nearby and in your mirrors.
  • Adjust and clean mirrors to watch the sides and trailer.
  • Check around you before moving off, changing lane or turning.
  • Pay particular attention to your right side and rear.
  • Remember that people may be hidden from your mirrors.
  • Use cameras as aids and understand their limits.

Exam trap: Wrong: An empty mirror means you can turn. Right: Check the hidden areas too.

Read the full explanation
  • Alternate between looking well ahead, checking the area close to you and checking your mirrors. Spotting a traffic queue, a change in gradient or a narrow section early allows you to slow down progressively and avoid improvised manoeuvres. You must keep observing on every road, even when you know the route and do not intend to overtake.
  • Adjust and clean the mirrors so you can monitor the sides and the trailer's path. The view changes during a turn and one part of the bodywork may hide another area from you; luggage must not restrict your view either. Allow for blind spots even if you cannot see any road users in the mirror: having a type-approved trailer requires you to use the combination's visibility equipment correctly. [RGC, art. 18](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a18).
  • Before moving off, changing lane or turning, pay particular attention to the area close to the minibus, its right-hand side and the area behind it. A cyclist or pedestrian may be out of sight and enter the area swept by the combination. Cameras and assistance systems supplement your observation; you must know their limitations and remain in control.

4Smooth controls and appropriate speed

A green minibus with seated passengers and an orange trailer travels in its lane on a curving road with the next stretch visible.
The key idea

Drive smoothly and adjust your speed so you can stop in time.

Remember

  • Accelerate, change gear, brake and steer gradually.
  • Avoid jolts and harsh braking that could unbalance passengers.
  • Choose a speed that lets you stop within the clear distance you can see.
  • Consider your condition, road, load, traffic and weather.
  • Find limits in “Speed and distances with a minibus and trailer”.

Exam trap: Wrong: You can always drive at the maximum limit. Right: Slow down further when conditions require it.

Read the full explanation
  • Accelerate, change gear, brake and steer progressively. Smooth driving reduces sudden load transfers, helps you maintain a stable path and protects passengers from jolts and loss of balance. In your D1+E practical assessment, passenger comfort is taken into account, with no sudden acceleration or harsh braking. [RGCond, Annex VI](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481).
  • Choose a speed that allows you to stop within the distance you can see and before foreseeable obstacles. You must consider your condition, the road, the vehicle, the load, traffic and the weather. The maximum limit is a ceiling: a sharp bend, a roundabout or an approach to a loading bay may require a much lower speed. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45).
  • See «Speed and distances with a minibus and trailer» for the limits that apply to a minibus with a trailer on each type of road.

5Separation and stopping margin

A green minibus towing an orange trailer travels in the right-hand lane of a rural road, leaving a large gap behind the car ahead.
The key idea

Leave room to brake smoothly; rebuild your gap if someone moves into it.

Remember

  • Adapt your gap to the load and avoid jolting passengers.
  • Look beyond the vehicle ahead to spot queues.
  • If someone fills your gap, ease off gently and rebuild your separation.
  • Consider the traffic behind you too.
  • Find following distances in “Speed and distances with a minibus and trailer”.
  • Check the additional gap for combinations and its exceptions there.

Exam trap: Wrong: Rebuild your gap with a sudden manoeuvre. Right: Ease off gently and rebuild your separation gradually, considering the traffic behind you.

Read the full explanation
  • Adapt your margin to the loaded combination and the space you need to slow down without jolting passengers. Look beyond the vehicle ahead: its brake lights may warn you too late of a hidden queue. If someone moves into the gap you have left, ease off the accelerator gently and progressively restore the gap, also taking account of the traffic behind you. [RGC, arts. 45 and 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54).
  • See «Speed and distances with a minibus and trailer» for safe following distances, the additional separation required for combinations and the exceptions.

6Tunnels, queues and cyclists ahead

A green minibus towing a trailer leaves a wide gap behind queuing cars on a two-way road.
The key idea

Approaching a queue, slow down smoothly and leave room to react.

Remember

  • Slow down gradually when approaching a queue.
  • Look behind without neglecting the road ahead.
  • Avoid stopping close behind the vehicle ahead.
  • When moving off, avoid accelerating to close the whole gap.
  • Find tunnel and cyclist gaps in “Speed and distances with a minibus and trailer”.

Exam trap: Wrong: Close the gap immediately when moving off. Right: Keep room to react.

Read the full explanation
  • When approaching a traffic queue, slow down progressively and keep space to react. Also look behind to identify approaching traffic, while continuing to pay attention to your driving. Stopping very close to the vehicle ahead reduces your room to manoeuvre; when moving off again, avoid accelerating to immediately close the entire gap that has opened up.
  • See «Speed and distances with a minibus and trailer» for separation distances in tunnels and when following cyclists.

7Crosswinds and changes in exposure

A green minibus towing an orange enclosed trailer travels in its lane as it leaves the shelter of trees for a wind-exposed area, indicated by an extended windsock and bent grass.
The key idea

In crosswinds, slow down early and keep control with gentle movements.

Remember

  • Hold the steering wheel firmly and correct gently.
  • Slow down before leaving tunnels or areas sheltered from wind.
  • Keep space beside the road edge and other vehicles.
  • Expect wind changes when meeting or overtaking large vehicles.
  • Do not assume an empty vehicle is safe from wind.
  • If you cannot control the combination, stop somewhere permitted and sheltered.

Exam trap: Wrong: Accelerate to escape the wind sooner. Right: Slow down early and avoid sudden movements.

Read the full explanation
  • In crosswinds, reduce your speed in good time, hold the steering wheel firmly and make gentle corrections. A long, tall combination exposes a large surface area to the wind; driving empty does not eliminate the risk of being blown off course or overturning. There is no single safe speed for all vehicles and all gusts. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45).
  • Take particular care when leaving a tunnel, crossing a viaduct or leaving an area sheltered by buildings, screens or trees. The wind can strike suddenly. Keep lateral clearance and avoid moving close to the edge or other vehicles before entering that area, because you need space to maintain your course.
  • When passing a large vehicle coming the other way or overtaking one, the shelter from the wind can change briefly and disappear as you pass it. Anticipate this change without making a sudden preventive steering movement. Check that you can keep the combination within its own space before starting a manoeuvre that leaves you alongside another vehicle for a long time.
  • If conditions prevent you from controlling the combination, find a sheltered place where stopping is permitted and stop safely. Do not accelerate to leave the dangerous area sooner. Experience does not neutralise a gust or allow you to maintain the same speed at all times; you must adapt your driving to the actual conditions throughout the journey.

8Body roll, snaking and loss of stability

A driver wearing a reflective vest checks a tyre on the trailer attached to a minibus stopped beside the right-hand kerb of a lay-by.
The key idea

If your trailer snakes, avoid sudden reactions and find the cause.

Problem to recogniseWhat happens
Body rollThe bodywork sways.
SnakingThe trailer moves alternately from side to side.
JackknifingThe minibus and trailer form an excessive angle and lose their controlled path.

Remember

  • Ease off the accelerator gently and keep your steering steady.
  • Avoid accelerating, braking sharply or making alternating sudden steering movements.
  • Follow your vehicle’s safety instructions.
  • Stop somewhere safe and investigate the cause before continuing.
  • Do not resume driving while safety remains compromised.
  • Do not rely on electronic aids to enter bends too fast.

Exam trap: Wrong: Counter each sideways movement with a sudden steering movement. Right: Keep steering steady and ease off gently.

Read the full explanation
  • Body roll is the oscillation of the bodywork; snaking involves alternating sideways deviations of the towed vehicle. Both indicate a reduced margin of stability. Speed, wind, a poorly distributed load, play in the coupling or the condition of the tyres and suspension can contribute to them.
  • If an oscillation starts, avoid accelerating, braking sharply or trying to counteract it with alternating sudden steering movements. Ease off the accelerator gently, keep the steering steady and follow the safety instructions for your vehicle and its systems. A violent reaction can increase the angle between the vehicles and cause you to lose control of the combination.
  • When you can stop safely, check the cause before continuing: the load, restraints, tyres and connection between the vehicles require attention. You do not solve repeated snaking by getting used to it. If you need an inspection or repair, do not resume driving while safety remains compromised.
  • Distinguish snaking from the combination folding, known as jackknifing: the minibus and trailer form an excessive angle and stop following a controlled course. You must prevent this with an appropriate speed, sufficient grip and progressive inputs. Electronic stability and anti-lock systems are aids and do not allow you to enter a bend too fast.

9Bends: slow down before entering

A green minibus towing an orange trailer travels in its right-hand lane with its brake lights illuminated before a bend on a rural road.
The key idea

Slow down before a bend and follow a smooth path.

Remember

  • Assess the bend and road surface before reaching it.
  • Adjust your speed and gear before entering.
  • Remember that a high load increases the risk of overturning.
  • Avoid harsh braking and sudden gear changes in the bend.
  • Accelerate gently when you can straighten and have checked the whole combination’s path.
  • Do not cross into oncoming traffic to cut the bend.

Exam trap: Wrong: You must skid before you can overturn. Right: You can lose stability without skidding.

Read the full explanation
  • Assess the bend's radius, visibility, gradient, banking and road surface before reaching it. Adjust your speed and gear on the approach so that you can negotiate it without sudden braking or steering inputs. The same road layout can require a different speed with a different load, rain or wind.
  • Enter at a speed that allows you to keep the combination stable and within its own space. A high load increases susceptibility to overturning: the vehicle does not need to skid to lose stability. Do not rely solely on how safe the minibus feels to assess what is happening to the towed vehicle.
  • Maintain a smooth course and avoid sudden braking or abrupt gear changes in the bend. If you need to adjust your speed, do so as progressively as safety allows. As you leave, accelerate gradually when you can straighten the steering and have checked the path of the entire combination.
  • Do not encroach into the opposing direction to improve your line or assume that an absence of traffic allows you to cut the bend. You must anticipate both the towed vehicle's inward tracking and the space occupied by the bodywork at the same time. If you cannot pass safely and comply with the traffic conditions, wait or find another solution. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45).

10Inward tracking and outward swing

A green minibus towing an orange trailer rounds a right-hand bend beside a kerb with a bollard, and an orange band marks the outward sweep of its rear overhang.
The key idea

When turning, watch the space inside and outside the whole combination.

Part of the combination turning forwardsSpace to watch
Trailer wheelsThey may track inside the minibus wheel tracks.
Bodywork behind the axlesIt can swing outwards from the turn.

Remember

  • Check the trailer’s clearance beside kerbs, posts and people.
  • Watch both sides throughout the turn.
  • Learn your combination’s reference points; they change with its axles and dimensions.
  • Before swinging wide, observe, signal and wait for a safe gap.
  • Stop if you lose the space you need.

Exam trap: Wrong: Swinging wide gives you priority. Right: Respect traffic already in the other lane.

Read the full explanation
  • As you move forwards through a tight turn at low speed, the trailer can follow a path further inside the turn than the minibus. Allow for the path of its axles past kerbs, traffic islands, posts and nearby road users, as well as that of the bus's axles. Do not assume that the trailer turns earlier or follows exactly the tracks of the towing vehicle.
  • The bodywork occupies more than just the tyre tracks. The rear overhang can swing outwards from the turn and approach a vehicle, wall or pedestrian on the other side. Watch both sides: while the wheels track inwards, another part of the combination can occupy space outside that path.
  • The behaviour depends on wheelbases, overhangs, articulation points and any steering axles. Learn the reference points for your configuration and check the space at low speed. A trailer with fixed centre axles and one with a pivoting front axle do not respond in the same way; the length of the minibus and the distance from the coupling to the rear axle also change the path.
  • If your dimensions require you to swing wide for a turn, you must take every precaution to avoid danger. This does not give you priority over anyone occupying another lane. Observe, signal the necessary movement, wait for a gap and monitor the swing throughout the manoeuvre; if you lose your clearance, stop. [RGC, art. 76](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a76).

11Urban turns and narrow passages

A green minibus towing an orange trailer is stopped beside the kerb before a narrow passage between stone walls.
The key idea

Check that the whole combination fits before turning, crossing or entering a narrow passage.

Remember

  • Before turning right, check for people beside you and inside the turning path.
  • If you swing wide, avoid appearing to turn in the opposite direction.
  • Before crossing, check there is room for the whole combination beyond the junction.
  • Check width and height throughout a narrow passage.
  • Include mirrors, load and projecting parts when checking space.
  • Slow down before entering; stop if there is insufficient space.

Exam trap: Wrong: Sounding your horn guarantees passage. Right: Check the space and stop if you cannot pass.

Read the full explanation
  • Before turning right, check that no cyclist, motorcyclist or pedestrian is alongside your right side or in the space into which the wheels track inwards. If you need to swing wide, avoid making the movement look like a definite turn in the opposite direction.
  • Before crossing, assess whether there is room for the full length on the other side: a traffic queue can leave the trailer blocking the junction even if the minibus has crossed. See «Manoeuvres with a minibus and trailer» for the rules on turning and crossing junctions. [RGC, art. 59](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a59).
  • Before a narrow passage, check the usable width and height along the entire route, allowing for mirrors, the load and any projecting parts. Slow down before entering and keep reference points on both sides. Sounding the horn or knowing the location does not establish that the passage is clear or remove the need to stop if there is insufficient space.

12Roundabouts with a long combination

A green minibus exits a roundabout with an orange trailer still on the roundabout, with all wheels on the road and clear of the kerb.
The key idea

On roundabouts, allow space for the whole combination and monitor your trailer until clear.

Remember

  • Choose a gap that allows for your length and acceleration.
  • Watch your trailer near the central island and allow for outward swing.
  • If you need another lane, check it is clear and respect its traffic.
  • Signal before moving into that lane.
  • Signal right to leave; watch pavements and nearby crossings.
  • Keep your speed low until the whole combination has completed the exit.

Exam trap: Wrong: Your exit ends when the minibus leaves. Right: Monitor the trailer until it has fully left too.

Read the full explanation
  • Before entering, allow for a gap that accommodates your acceleration and the length of the entire combination.
  • Anticipate the towed vehicle tracking inwards near the central island and the outward swing. On a small roundabout, the dimensions of the combination can mean you need more than one lane. Before occupying another lane, you must check that it is clear, respect the priority of anyone travelling in it and signal your movement; you cannot swing out suddenly into another vehicle's path. [RGC, art. 76](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a76).
  • See «Manoeuvres with a minibus and trailer» for priority, lanes and signalling when entering and leaving roundabouts.
  • Signal right to leave and watch the inside of the turn, the pavement and nearby crossings. Do not consider the manoeuvre complete when the minibus leaves: you must check that the towed vehicle leaves the roundabout without mounting the kerb or striking a road user. Keep your speed low until the entire combination is aligned with its onward path.

13Joining traffic and changing lane

A green minibus towing an orange trailer travels fully aligned in the right lane of a divided motorway, with clear space ahead of and behind the combination.
The key idea

Choose a large enough gap and complete lane changes with the whole combination.

Remember

  • Judge the gap using your length and available acceleration with the load.
  • Move across gradually.
  • Check that the trailer is completely within the lane.
  • Find joining and lane-changing rules in “Manoeuvres with a minibus and trailer”.

Exam trap: Wrong: Getting the minibus into the lane is enough. Right: Check the whole trailer is inside too.

Read the full explanation
  • Choose a gap that accommodates your full length and the acceleration available with passengers and luggage on board. Move the combination gradually and check that the trailer is fully aligned in the lane before considering the lane change complete. See «Manoeuvres with a minibus and trailer» for the rules on joining traffic and changing lane.

14Overtaking: assess time and space

A minibus towing a trailer travels in the overtaking lane of a divided road, with the entire trailer ahead of the car in the right-hand lane.
The key idea

Overtake only when you can complete the manoeuvre with space for the whole combination.

80 km/hConventional road limit
3,500 kgR-306 lorry threshold
Vehicle facing R-306Does this sign ban overtaking?
Lorry above 3,500 kg MMAYes.
Minibus with a trailerNo, not because it tows a trailer; check other restrictions.

Remember

  • Assess visibility, vehicle lengths, gradient and acceleration with your load.
  • Allow space to pull out, pass and return with the whole combination.
  • A small speed difference means overtaking takes longer; stay within the 80 km/h limit.
  • Wait until the whole trailer has passed before returning to your lane.
  • Return gently without forcing the other driver to change speed or direction.

Exam trap: Wrong: R-306 bans your overtake because you tow a trailer. Right: It applies to lorries above 3,500 kg MMA; check restrictions applying to your combination.

Read the full explanation
  • Assess visibility, the length of both vehicles, the speed difference, the gradient and your acceleration capability with your load. You must have enough space to pull out, pass and return with the entire combination. [RGC, art. 84](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a84).
  • Before returning to your lane, wait until the entire trailer has passed the other vehicle and leave it sufficient clearance. Check in your mirrors and return gradually, without forcing its driver to change course or speed. The minibus having passed does not mean that the rear end has passed; any visual reference you use must be valid for your combination. [RGC, art. 85](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a85).
  • On a conventional road, your minibus with a trailer has a general speed limit of 80 km/h. If the slow vehicle ahead is travelling close to that limit, the small speed difference prolongs the overtake and your combination's exposure to oncoming traffic. Maintain your distance and wait for an opportunity to overtake at a noticeably higher speed, without exceeding the applicable limit. [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48). [RGC, art. 85](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a85).
  • R-306, «No overtaking by lorries», prohibits lorries with an MMA (maximum authorised mass) over 3,500 kg from overtaking any motor vehicle, including cars and motorcycles, even without entering the opposing lane. Your D1+E minibus does not fall within its scope because of its mass or because it tows a trailer. For signs affecting your combination, see «Traffic signs and their order of priority». [Official catalogue, R-306](https://www.boe.es/buscar/doc.php?id=BOE-A-2025-12199). See «Manoeuvres with a minibus and trailer» for overtaking conditions and prohibitions.

15Overtaking vulnerable road users

A minibus towing a trailer overtakes a cyclist in the left lane of a divided carriageway, maintaining wide lateral clearance while the cyclist is alongside the rear part of the trailer.
The key idea

Keep lateral clearance until your whole trailer has passed the vulnerable road user.

Remember

  • Measure clearance from the outermost parts of both minibus and trailer.
  • Keep that clearance until the rear has passed.
  • Avoid cutting in ahead of a cyclist.
  • Remember that air displaced by your combination can unbalance them.
  • Find overtaking clearances and conditions in “Manoeuvres with a minibus and trailer”.

Exam trap: Wrong: Move closer once your minibus passes the cyclist. Right: Keep clearance until your whole trailer passes.

Read the full explanation
  • Measure lateral clearance from the outermost parts of the minibus and trailer, and maintain it until the rear end has passed. The air displaced by the combination can unbalance a cyclist; avoid cutting in ahead of them. [RGC, art. 85](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a85). See «Manoeuvres with a minibus and trailer» for the clearances and conditions for overtaking vulnerable road users.

16When others overtake you

A green minibus towing a trailer travels in a straight line in the right lane of a divided road while an orange car overtakes it in the left lane.
The key idea

Keep your combination steady and help others pass when conditions make overtaking difficult.

Remember

  • Keep a steady path and watch your trailer in the mirrors.
  • Avoid sudden movements that bring your trailer closer to the overtaking vehicle.
  • If road conditions or oncoming traffic prevent easy, safe overtaking, help others pass.
  • In that case, slow down or move onto a usable hard shoulder.
  • Before moving aside, check the shoulder’s strength, width, continuity and users.
  • Check that you can move the whole combination there safely.

Exam trap: Wrong: You can routinely drive on the hard shoulder. Right: Drive on the carriageway; if its width, profile or condition, or oncoming traffic, prevents easy, safe overtaking, slow down or move onto a usable hard shoulder after checking it.

Read the full explanation
  • Keep a steady course and monitor the trailer in your mirrors: a sudden movement of the minibus can bring the trailer closer to the overtaking vehicle.
  • If the width, profile or condition of the carriageway, or oncoming traffic, prevents others from overtaking you easily and safely, you must slow down or move onto a usable arcén (hard shoulder) to let them pass. Article 86.3 covers this specific situation; the general rule in article 31.1 requires you to drive on the carriageway and reserves use of the hard shoulder for emergencies. Before moving onto it, check its load-bearing capacity, width, continuity and users so that you can move the entire combination onto it safely. [RGC, art. 31](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a31). [RGC, art. 86](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a86). See «Manoeuvres with a minibus and trailer» for your duties when another vehicle overtakes you.

17Descents: prepare to control your speed

A green minibus carrying passengers and towing an orange trailer travels in the right-hand lane at the start of a winding descent in a Mediterranean landscape.
The key idea

Choose a speed and gear that keep your combination stable before a descent.

Remember

  • Choose a speed and gear that keep your combination stable.
  • Prepare early so you can reach bends without harsh braking.
  • Consider passenger comfort.
  • Find engine braking and downhill techniques in “Trailer and combination braking”.

Exam trap: Wrong: Wait until the bends to prepare for a descent. Right: Choose your speed and gear beforehand to keep the combination stable.

Read the full explanation
  • Before a descent, select a speed and gear that keep the combination stable and allow you to approach bends without harsh braking; also consider passenger comfort. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45).
  • See «Trailer and combination braking» for engine braking, brake fade and the full technique for long descents.

18Retarders: progressive use and limits

A green minibus with an aligned orange trailer descends in its right-hand lane on a wet road in the rain.
The key idea

Apply retardation gradually and follow the manufacturer’s instructions.

Remember

  • Apply retardation gradually.
  • Avoid sudden actions, especially on slippery surfaces.
  • Sudden retardation can put your minibus and trailer out of line.
  • Find limits and service brake use in “Trailer and combination braking”.

Exam trap: Wrong: Apply retardation suddenly on slippery surfaces. Right: Apply it gradually following the manufacturer’s instructions.

Read the full explanation
  • Apply the available retardation progressively in accordance with the manufacturer's instructions: abrupt braking of the minibus can affect grip and alignment with the trailer, especially on slippery surfaces.
  • See «Trailer and combination braking» for how retarders work, their limits and their use in combination with the service brake.

19Rain, slippery surfaces and poor visibility

A green minibus towing an orange trailer travels in the rain on a wet road, leaving a large gap behind the car ahead.
The key idea

In rain or on slippery roads, slow down early and increase your gap.

Remember

  • Slow down and increase your gap before you need to brake.
  • Avoid sudden acceleration, braking and steering.
  • Take extra care on wet markings, metal covers and standing water.
  • Prepare to slow down on straight sections and enter bends slowly.
  • Remember that spray from both vehicles makes it harder for others to see.
  • Approach crossings slowly; you may hide pedestrians from drivers in other lanes.

Exam trap: Wrong: Adapt your driving only when a warning sign appears. Right: Always adapt to the surface and visibility.

Read the full explanation
  • In rain or on slippery road surfaces, reduce your speed and increase your following distance before you need to brake. Avoid sudden acceleration, braking and steering, especially on wet road markings, metal covers or areas of standing water. You must adapt your driving even if no sign warns you of the dangerous road surface. [RGC, art. 46](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a46).
  • You need grip both to brake and to change direction. If you demand too much of both at once, you can lose control; slow down while travelling in a straight line and enter bends with a safety margin. Driver assistance systems do not allow you simply to maintain your dry-road pace or compensate for unsuitable or defective tyres.
  • In rain, the wheels of the minibus and trailer throw up spray that reduces visibility for drivers following or overtaking you. Reduce your speed smoothly and avoid changes of direction that prolong their exposure alongside the combination. [RGC, art. 46.1.g](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a46).
  • The length and height of the combination can hide a pedestrian on a crossing from drivers in other lanes. Approach slowly and anticipate the pedestrian emerging from that hidden area. [RGC, art. 46](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a46).
  • See “Maintaining the minibus and its trailer” for the use of chains and winter equipment, and “Safety devices on the combination” for lighting in reduced visibility.

20Reversing: check and protect

A guide wearing a reflective vest raises her palm from beside the trailer of a stationary minibus while the driver watches her through the window.
The key idea

Before reversing, check the whole area and keep control throughout the manoeuvre.

Remember

  • Check behind and all the space your minibus and trailer will occupy.
  • Get out to check or ask for help if necessary.
  • Signal and reverse slowly.
  • Agree clear signals with your guide; choose a visible, safe position for them.
  • Stop if you lose sight of your guide or misunderstand a signal.
  • Remember that you remain responsible even when someone helps.

Exam trap: Wrong: A camera proves the space is clear. Right: Check the whole area before moving.

Read the full explanation
  • Before moving, check the entire area behind you and the space the minibus and trailer will sweep through. You must do this even if it means getting out or following another person's guidance when necessary. Signal and reverse slowly; lights, warning devices, cameras or sensors alone do not prove that the space is clear. [RGC, art. 81](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a81).
  • If someone guides you, agree on clear signals and a visible position outside the vehicle's path and any trapping zones. Stop if you lose sight of them or do not understand an instruction. Their help does not transfer your responsibility or allow you to move the combination into a space you cannot monitor. See “Manoeuvres with a minibus and trailer” for the permitted situations, limits and signalling requirements for reversing.

21Reversing in a straight line

A green minibus with an orange trailer is aligned between the white lines of a manoeuvring area marked by cones, with both rear-view mirrors visible.
The key idea

Reverse very slowly, watch both mirrors and correct deviations early.

Trailer type when reversingWhat you must monitor
Centre-axle trailerThe coupling angle and its effect on your path.
Trailer with a pivoting front axleAlso the axle and drawbar direction.

Remember

  • If legal and safe, move forwards first to align the combination.
  • Also check height, branches and projecting obstacles.
  • Watch both mirrors and make small corrections.
  • Wait to see the effect before turning the wheel further.
  • If badly misaligned, stop; move forwards to correct only when permitted and safe.
  • Watch the coupling angle and prevent parts from hitting each other.

Exam trap: Wrong: All trailers respond alike when reversing. Right: Adapt your reference points to the axles; also watch the drawbar with a pivoting front axle.

Read the full explanation
  • Prepare your position by driving forwards until the minibus and trailer are aligned with the space you intend to enter, provided you can do so legally and safely. Good initial positioning reduces later corrections. Also check headroom, branches, projections and obstacles outside your usual mirror view.
  • Reverse very slowly, keeping reference points in both mirrors. Compare the position of the trailer's sides with the boundaries of the passage and spot any deviation early. Do not look only in the mirror that gives you the best view of your destination: the other side may also be approaching an obstacle.
  • With a centre-axle trailer, steering the minibus changes the angle at the coupling and then alters the trailer's path. Make small corrections and observe their effect before steering further. With a steerable front axle, you must also monitor the orientation of that axle and the drawbar: avoid applying the same reference points to different configurations.
  • When alignment deteriorates significantly, stop and, if the location and manoeuvre allow it, drive forwards to restore alignment before reversing again. Monitor the articulation limits, connections and clearance between the minibus body, drawbar and trailer. An excessive angle can cause damage even at minimal speed.

22Reversing round a bend

A green minibus with an orange central-axle trailer reverses with a small hitch angle toward a marked bay in a practice yard.
The key idea

When reversing round a bend, build the angle gradually and straighten in good time.

Rear direction: centre-axle trailerSmall initial steering movement
To the leftTo the right.
To the rightTo the left.

Remember

  • Plan the trailer’s rear path and the minibus’s space on the opposite side.
  • With centre axles, start with a small steering movement in the opposite direction.
  • Then straighten and follow the path in good time.
  • Watch inside the bend, the minibus’s swing and the hidden side.
  • If you lack reliable reference points, stop and check or ask for guidance.
  • Reduce the angle before reaching the final direction, so you finish aligned.

Exam trap: Wrong: Keep the wheel turned throughout reversing. Right: Straighten and follow in good time; the initial opposite-steering guide applies to centre-axle trailers.

Read the full explanation
  • Assess where the rear of the trailer needs to go and how much space the minibus needs on the opposite side. With a centre-axle trailer, you must progressively create an angle at the coupling, then follow and correct the trailer's path. With a steerable front axle, also monitor the drawbar and the trailer's steering: its response requires its own reference points.
  • As an initial guide for a centre-axle trailer, if you want its rear to move to the left, start by turning the steering wheel slightly to the right; to move it to the right, turn left. Then straighten up and steer to follow the trailer in good time to limit the angle. This initial guide does not mean keeping the steering wheel turned throughout the reverse, and it does not automatically apply to a trailer with a steerable front axle.
  • Monitor the inside of the bend, the minibus's swept area and the side that becomes harder to see. In general, positioning yourself to get a better direct view of the side towards your destination makes control easier, but never replaces checking the hidden side. If you lack reliable reference points, stop and check or ask for guidance.
  • Before the trailer reaches its final orientation, progressively reduce the articulation angle so that you finish aligned. Waiting until it has fully turned can allow the angle to keep tightening and take you beyond your intended path. Practise anticipating this with your combination in a suitable enclosed area; do not learn by improvising on a road in use.

23Parking and securing on a slope

A green minibus with an orange trailer is parked uphill beside the right kerb on firm asphalt, with wheel chocks on the downhill side of the wheels of both units.
The key idea

Choose firm ground and secure the whole combination before getting out.

Remember

  • Check that the ground can support both minibus and trailer.
  • Leave space for the combination’s movement when you pull out.
  • Before getting out, check that no part can move.
  • Follow the securing measures in “Manoeuvres with a minibus and trailer”.

Exam trap: Wrong: Get out without checking the trailer. Right: Check that no part of the combination can move.

Read the full explanation
  • Choose a position with firm ground under both vehicles and enough space for the swept area you need when leaving. Before leaving the driving seat, check that no part of the combination can move; apply the measures for securing it against movement covered in “Manoeuvres with a minibus and trailer”. See “Manoeuvres with a minibus and trailer” for the rules on parking and securing the combination on a slope.

24Practical test: manoeuvres G, L and M

A green minibus with an attached orange trailer is inside the white markings of a bend bordered by cones on a closed driving course.
The key idea

Prepare your safety checks and the closed-circuit manoeuvres for your licence.

10 mG: minimum before and after
90°G: approximate bend angle
3.50 mG: minimum bend radius
Manoeuvre or combination layoutWhat you must remember
GReverse in a straight line and round a bend.
LPark for safe passenger boarding and alighting.
MUncouple and couple the trailer again.
G: rigid vehicle with trailer with pivoting front axleLane width: 7 m; one forward correction allowed.
G: combination with single-axle trailerLane width: 3.50 to 4.50 m.

Remember

  • Demonstrate safety checks before starting the manoeuvres.
  • In G, reverse steadily without stopping or steering while stationary.
  • In G, avoid markings, kerbs and boundary markers.
  • Only with a pivoting front axle may you make one forward correction in G.
  • In M, secure and uncouple; leave the minibus beside the trailer, out of alignment.
  • For coupling in M, start at least 10 m away; you may exit once.

Exam trap: Wrong: N is part of the D1+E test. Right: You perform G, L and M; N belongs to B+E.

Read the full explanation
  • For D1+E, you must perform the following manoeuvres on a closed circuit: G, reversing in a straight line and round a bend; L, parking to allow passengers to board and alight safely; and M, coupling and uncoupling the trailer. Beforehand, you must demonstrate preparation and safety checks. You also take a road test; exemptions and entitlements granted through other licences are covered in “D1+E licence: requirements, tests and validity”. [RGCond, annex V, B.3.8; annex VI, C.4](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481).
  • In G, position the rear at least 10 m from the start of the bend, reverse along the straight section, follow the bend and continue for at least another 10 m along the final straight section. Keep the combination reasonably centred. The layout simulates a corner to the right or left. [RGCond, annex VI](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481).
  • The bend in G has an angle of approximately 90° and a minimum radius of 3.50 m. Annex VI specifies a lane width of 7 m for a rigid vehicle with a trailer with a steerable front axle; it also specifies 3.50 to 4.50 m for combinations with a single-axle trailer. Practise with the configuration and regulation layout for your combination, without assuming one width applies to all D1+E combinations. [RGCond, annex VI, C.4, G](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481).
  • In G, keep moving steadily: you must not stop the combination or turn the steering while stationary. You must not mount kerbs or force the wheels against them, drive on or cross the markings, or knock over, hit, push, scrape or touch the boundary markers. You may make one forward correction only if you have a trailer with a steerable front axle. [RGCond, annex VI, C.4, G](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481).
  • In M, you must secure the combination against movement, uncouple the trailer and leave the minibus alongside it, out of alignment. Then drive forwards to position yourself in front of the trailer at a distance of at least 10 m and reverse towards it to couple up; during this approach, you may get out once to check. Complete the connections and safety fittings, and stow the equipment used to prevent movement and provide support, following the procedure in “Coupling and uncoupling the trailer”. [RGCond, annex VI, C.4, M](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481).
  • N is safe parking for loading or unloading for B+E; K is approaching a loading ramp or platform for C1+E and C+E. These loading manoeuvres do not replace the approach for passengers required for your licence. [RGCond, annex V, B.3.7-8; annex VI, C.4](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481).

25Approaching a stop and manoeuvre L

A minibus towing a trailer is stopped beside the right-hand kerb with its passenger door open while one person boards from the pavement and another waits.
The key idea

Approach smoothly and leave safe space for passengers to board and alight.

20 cmL: maximum distance from kerb
6 mL: minimum street width
1.20 mL: initial lateral separation
1.50 mL: clear passenger space
Measurement in the L layoutRequired condition
Distance from kerbNo more than 20 cm.
Street widthAt least 6 m.
Initial lateral separation1.20 m.
Parking space lengthAt least twice the length of the vehicle or combination.
Clear passenger space1.50 m without obstacles.

Remember

  • Watch pedestrians, street furniture and the trailer’s path when approaching the kerb.
  • In L, park on the right, parallel to the kerb.
  • In L, enter in one movement and leave in another; never reverse.
  • In L, leave safe space; open the rear door and close it before leaving.
  • At real stops, secure before opening doors; wait until boarding and alighting finish.
  • Before moving, close doors, observe and respect priority when joining traffic.

Exam trap: Wrong: L allows reversing to correct your position. Right: Enter in one forward movement and leave in another, without reversing.

Read the full explanation
  • Plan your approach with enough space for the minibus and trailer, aiming to position the door access beside a safe area. Watch for pedestrians, street furniture and the trailer's swept path before approaching the kerb. Your precise stopping position must protect both those waiting on the pavement and those travelling inside.
  • In manoeuvre L, you must park on the right-hand side, parallel to the kerb and no more than 20 cm from it. Leave enough clear space for passengers to board and alight safely when you operate the rear door opening control; then close the door and pull out of the parking space. You must complete the entry in one movement and the exit in another, without reversing. [RGCond, Annex VI, C.4, L](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481).
  • The simulated street for manoeuvre L is at least 6 m wide. You start with a lateral clearance of 1.20 m; the parking space is at least twice the length of the vehicle or combination, and there must be an unobstructed space of 1.50 m for safe boarding and alighting. Relate each measurement to its purpose when planning your path. [RGCond, Annex VI, C.4, L](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481).
  • At an actual stop, secure the vehicle against movement before opening the doors and monitor the access area while keeping the trailer in view. Before moving off, confirm that boarding and alighting have finished, close the doors and check both sides and the space you need to pull out. [RGC, art. 114](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a114).
  • When pulling out, avoid bringing the overhang or trailer close to people on the pavement and observe the applicable priority rules when joining traffic. Accelerate and steer smoothly so that you maintain the precision of your stop as you move off again. [RGC, art. 72](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a72).

Turning with the whole combination

Anticipate the path of the inner wheels and the outward swing before you turn the steering wheel.

  1. Check the exit, your mirrors and blind spots.
  2. Slow down before the turn and assess the paths of the axles, bodywork and overhangs.
  3. Signal and check priority before occupying the space you need.
  4. Steer progressively while watching both sides.
  5. Keep control until the rear end has passed; stop if you lose your safety margin.

Reversing round a bend in a real manoeuvre

Position the combination, create an angle at the coupling and restore alignment with small movements.

  1. Check that you can legally reverse and limit the distance.
  2. Inspect your destination and the swept area; arrange help if visibility is insufficient.
  3. Get into position and gradually create the right angle for your trailer configuration.
  4. Watch both sides and follow the turn without letting the angle at the coupling become too sharp.
  5. Stop if you lose your reference points or someone appears; correct by moving forwards if this is permitted and safe.
  6. Restore alignment before reaching your destination and secure the combination against movement.

Check what you know

Real questions from the bank on this topic. Pick an answer to see the explanation.

1On a long downhill section with a bus and trailer it is advisable to:
2If a medicine can affect attention or reaction time while driving a D1+E or D+E combination:
3If the road surface is very slippery while driving a D1+E or D+E combination, the prudent action is to:
4With a D+E combination carrying passengers, maneuvers should be carried out:

Finished this module?

Mark it as read and you will see your progress on the theory list.

Next module