Theory · C1+E Licence - Light Truck with Trailer · Module 4 of 13

Safe coupling and uncoupling

Learn to couple and uncouple your C1+E combination, ensuring immobilisation, locking, connections and support. The sequences cover fifth-wheel and drawbar couplings, with checks that prevent movement, collapse of the towed vehicle and accidental separation.

29 min read22 sectionsReviewed Nov 3, 2026
A person wearing a reflective vest inspects the coupling between a light truck and its trailer secured with wheel chocks and a lowered jockey wheel.
Safe checks of coupling and trailer support

1What you must secure when coupling

A worker consults a manual beside the drawbar coupling connecting a light truck to a trailer, both secured with wheel chocks in a yard.
The key idea

Identify your coupling and follow the instructions for your equipment.

CouplingWhat it connects or supports
Fifth wheelReceives the kingpin and supports the front of the semi-trailer
Drawbar couplingConnects the lorry to the trailer’s towing eye

Remember

  • Identify your coupling before starting.
  • Read the instructions for your lorry, towed vehicle and coupling.

Exam trap: Wrong: All couplings work the same way. Right: Follow the instructions for your fitted equipment.

Read the full explanation
  • On your C1 lorry, identify the coupling fitted: the fifth wheel receives the kingpin and supports the front of the semi-trailer; the drawbar coupling connects the lorry to the trailer's towing eye.
  • Follow the instructions for your towing vehicle, towed vehicle and coupling: the controls, indicators and adjustments depend on the equipment.

2Compatibility before approaching

A worker checks the electrical and pneumatic connectors beside the coupling of a light truck, separated from a trailer resting on its support leg with a wheel chocked in a parking yard.
The key idea

Check that your lorry and towed vehicle can work together.

12,000 kgC1+E combination maximum MMA

Remember

  • Use compatible mechanical, air and electrical connections.
  • Find the lock, safety device, parking brake and supports.
  • Check the permitted combination in your technical documents.
  • With a C1 towing vehicle, keep the combination’s MMA within 12,000 kg.
  • Identify any extra service connections.

Exam trap: Wrong: Your licence allows any towed vehicle within 12,000 kg. Right: With a C1 towing vehicle, respect that combination MMA limit and the combination permitted in your technical documents.

Read the full explanation
  • Use compatible mechanical, pneumatic and electrical connections between the towing vehicle and the towed vehicle. This requirement covers all three types of connecting components. [RGV, art. 13.1](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a13).
  • Identify the type of locking mechanism, how to check it and the safety lock that prevents it from opening unintentionally. Before reversing, also locate the towed vehicle's parking brake, its supports and the connection points.
  • Confirm that the combination is authorised by the technical specifications of its components. For a C1+E combination with a C1 towing vehicle, the combination's MMA (maximum authorised mass) must not exceed 12,000 kg; this licence limit does not prove that your particular lorry can tow any towed vehicle that brings the combination up to that limit. Before coupling, check the permitted combination in the technical documentation; the calculations are explained in «Maximum dimensions and masses». [RGCond, art. 4.2](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#a4).
  • Identify any additional equipment fitted to your combination, such as service connections for specialised bodywork. Make a list beforehand of everything that must be connected and everything that must be stowed away.

3Location and working area

A light truck and an uncoupled trailer are aligned on firm, level ground, with the trailer support resting on the surface and a helper standing to one side, outside the space between the vehicles.
The key idea

Choose safe ground and keep the movement area clear.

Remember

  • Choose firm, stable ground that is as level as possible.
  • Check that the ground supports the semi-trailer’s landing feet.
  • Leave space to approach, align and withdraw your lorry.
  • Check for obstacles above, below and beside you.
  • Keep people out from between vehicles whenever either vehicle can move.
  • Agree clear signals with your guide; stop if you lose sight of them.

Exam trap: Wrong: Ground supporting wheels will support landing feet. Right: Check the ground beneath each support.

Read the full explanation
  • As a practical precaution, choose a firm, stable surface that is as level as possible. Pay particular attention to where the semi-trailer's landing feet will rest: ground that supports the wheels may give way under a small support.
  • Allow enough space to align the towing vehicle, approach slowly and withdraw it without hitting the towed vehicle. Look for obstacles above, to the sides and below, and check the space the cab and its accessories will occupy.
  • Keep people out of the space between the vehicles while either vehicle can move. If someone helps you, agree on clear signals and a visible, safe position for the person guiding you. Stop if you lose sight of that person.

4Immobilise before leaving the cab

A light truck and its trailer are parked beside the kerb with wheel chocks on both units, while the driver remains in the cab holding the parking brake lever.
The key idea

Secure your lorry and towed vehicle before leaving the cab or working between them.

SituationWhat you must do
Uphill: leaving your driving position in the specified circumstancesLeave first gear engaged or select the appropriate parking position
Downhill: leaving your driving position in the specified circumstancesLeave reverse engaged or select the appropriate parking position

Remember

  • Immobilise both vehicles before leaving the cab.
  • When leaving in the specified circumstances, stop the engine, switch off ignition and brake.
  • If you move away, prevent unauthorised use.
  • On significant gradients, chock as «Securing the combination when leaving the driving seat» explains.
  • Keep the towed vehicle’s parking brake applied while working on foot and preparing connections.
  • Secure the detached towed vehicle with its own devices.

Exam trap: Wrong: Resting a lorry wheel against a kerb also secures the detached towed vehicle. Right: Immobilise the towed vehicle with its own devices.

Read the full explanation
  • Immobilise both units before leaving the cab or working between them. Locate the towed vehicle's parking brake control and check that the brake is applied in accordance with its instruction plate; keep it applied while working on foot and preparing the connections.
  • If you leave the driving seat in the circumstances covered by article 92.3, you must stop the engine, switch off the starting system and apply the parking brake; if you move away, prevent unauthorised use. Leave first gear engaged uphill, reverse gear downhill, or select the appropriate parking position. [RGC, art. 92.3](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a92).
  • On a significant gradient, chock the combination as explained in «Manoeuvres with a light lorry and trailer», in the section «Securing the combination when leaving the driving seat». [RGC, art. 92.3.d](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a92).
  • The detached towed vehicle must be immobilised independently of the towing vehicle: resting a lorry wheel against a kerb only holds the lorry. Identify the towed vehicle's own devices before starting to separate the vehicles.

5Inspect the coupling components

A person uses a flashlight to inspect the coupling and drawbar eye of a light truck and its trailer secured with wheel chocks, keeping their hands away from the closing mechanism.
The key idea

Inspect your coupling parts with both vehicles immobilised.

CouplingParts you must inspect
Fifth wheelEntry throat, lock, handle, safety lock, kingpin and semi-trailer plate
Drawbar couplingTowing eye, coupling pin and retaining device

Remember

  • Look for cracks, bent or missing parts, and unusual movement.
  • Check that dirt cannot prevent correct seating or locking.
  • Keep your hands out of the closing mechanism’s path.
  • Stop and request technical inspection if you find damage or abnormal wear.
  • Clean and lubricate as your equipment instructions require.

Exam trap: Wrong: You can continue with damaged parts if the lock works. Right: Stop and request technical inspection.

Read the full explanation
  • Inspect the mountings, locking mechanisms and contact surfaces before joining them. Look for missing parts, deformation, cracks, abnormal play and dirt that prevents proper seating or locking. If you find damage or abnormal wear, stop the operation and arrange a technical inspection.
  • On the fifth wheel, identify the entry throat, the mechanism that retains the kingpin, the release handle and its safety lock. On the semi-trailer, inspect the kingpin and the plate that rests on the fifth wheel plate. Carry out the inspection with the vehicles immobilised and keep your hands out of the path of the closing mechanism.
  • On a drawbar coupling, check the towing eye, the coupling pin or bolt and its retaining device, with the vehicles immobilised and your hands out of the path of the closing mechanism.
  • Maintain the surfaces in accordance with the equipment's cleaning and lubrication instructions; detailed maintenance is covered in «Maintenance and inspection of the vehicle combination».

6Align the towing vehicle and semi-trailer

A green light tractor unit is aligned in front of an orange semitrailer resting on its landing legs, with the fifth wheel and kingpin visible before coupling.
The key idea

Align your lorry and adjust the height before reversing slowly.

Semi-trailer heightRisk
Too highIt may seem coupled when it is not
Too lowParts may strike each other

Remember

  • Align the kingpin with the fifth-wheel entry throat.
  • Adjust the height for your equipment.
  • Before adjusting suspension, check that nobody can become trapped.
  • Reverse very slowly; stop if you meet abnormal resistance.
  • Also stop if alignment is lost or you are unsure about space.
  • Stop and immobilise before leaving the cab to check.

Exam trap: Wrong: Pushing harder corrects the height. Right: Stop and adjust the height for your equipment.

Read the full explanation
  • Approach with the towing vehicle aligned with the semi-trailer so that the kingpin follows the entry throat of the fifth wheel. Use the mirrors and available reference points, but get out to check heights and positions when necessary.
  • Adjust the height as required by the equipment so that the semi-trailer plate seats correctly on the fifth wheel and the kingpin enters at the height of the locking mechanism. If it is too high, the coupling may appear to be engaged when it is not. If it is too low, impacts may occur; do not memorise a gap in centimetres as a universal value.
  • If you use the air suspension to adjust the height, follow the vehicle's procedure and anticipate any change in how it is supported. Before operating a control, check that nobody is in an area where they could be trapped.
  • Reverse very slowly and stop if you encounter abnormal resistance, lose alignment or are unsure about the available space. Pushing harder is no substitute for correcting the height. If you need to check the position, stop approaching and immobilise the vehicles as described in «Immobilise before leaving the cab». [SAF-HOLLAND, FW35 manual, §§ 3 and 6-8](https://safholland.com/mx/es/servicio/centro-de-descargas/document/resource/environment/project1_p/documents/documentationP/Before%2520Empolis%2520Box%2520update/pLiterature/XL-FW10009UM_es-US.pdf#page=1).

7Close and lock the fifth wheel

A driver uses a flashlight to inspect the fifth-wheel lock and safety latch of a light truck coupled to a semitrailer, with a wheel chocked and the landing legs lowered.
The key idea

Check the seating, kingpin lock and safety device before continuing.

Remember

  • Complete the kingpin’s entry as the manual requires.
  • Secure your lorry before checking the lock directly.
  • Check that the semi-trailer plate rests correctly on the fifth wheel.
  • Check the lock around the kingpin and the handle’s position.
  • Secure the device that prevents accidental opening.
  • Resolve doubts before retracting supports or preparing to move off.

Exam trap: Wrong: An electronic coupling signal is enough. Right: Follow the manual when interpreting it and complete the seating, lock and safety-device checks.

Read the full explanation
  • Complete the entry of the kingpin into the mechanism according to the coupling instructions. Then, with the towing vehicle secured, check directly that the locking mechanism is in the specified closed position.
  • Check the contact between the semi-trailer plate and the fifth-wheel plate, as well as the lock around the kingpin. If you notice an abnormal gap, a doubtful jaw position or a handle that does not reach its proper position, treat the coupling as incomplete. Inspecting the contact surfaces and the lock forms part of the technical procedure for the equipment. [SAF-HOLLAND, FW35 manual, §§ 3 and 6-8](https://safholland.com/mx/es/servicio/centro-de-descargas/document/resource/environment/project1_p/documents/documentationP/Before%2520Empolis%2520Box%2520update/pLiterature/XL-FW10009UM_es-US.pdf#page=1).
  • Secure the device that prevents unintentional opening and check its position. The coupling must include a component that prevents uncoupling. Do not replace a missing safety device with wire or keep it disabled to make the next uncoupling easier. [RGV, art. 13.3](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a13).
  • If you have an electronic coupling indicator or warning, interpret it according to the manual and complete the prescribed checks. If you cannot verify that the coupling is locked, resolve the uncertainty before retracting the supports or preparing to move off.

8Check mechanical retention

A driver remains at the wheel of a light truck coupled to a trailer with chocks on both sides of one wheel and the coupling visible, with nobody between the vehicles.
The key idea

Check that your coupling resists separation using the manufacturer’s test.

Remember

  • Carry out the manufacturer’s gentle tug test.
  • Keep the towed vehicle restrained and supports positioned as the test requires.
  • Keep people away from components that could move.
  • Stop if anything moves unexpectedly.
  • Also inspect the lock and safety device.
  • If testing fails, immobilise, keep the semi-trailer supported and seek technical help when needed.

Exam trap: Wrong: Resisting a tug proves the lock is correct. Right: Use the prescribed test without violent jerks, and check the lock and safety device.

Read the full explanation
  • As a technical check, carry out the gentle pull test prescribed by the manufacturer, keeping the towed vehicle restrained and the supports in the safe configuration specified for that test. The aim is to check that the coupling resists separation, not to move the combination or subject it to a violent jerk.
  • Make sure no one is between the vehicles or next to components that could move. Use the control and pulling force specified in the manual and stop if any unexpected movement occurs.
  • Supplement the mechanical test by inspecting the lock and safety device. Resistance may have another cause, and simple contact between surfaces does not prove that the coupling is locked.
  • If the check fails, immobilise the vehicles again, keep the semi-trailer supported and check alignment, height and locking according to the manual. Do not drive off to see whether it settles into place as you move. If there is wear, a fault or any inability to confirm that the coupling is secure, request technical assistance. [SAF-HOLLAND, FW35 manual, §§ 3 and 6-8](https://safholland.com/mx/es/servicio/centro-de-descargas/document/resource/environment/project1_p/documents/documentationP/Before%2520Empolis%2520Box%2520update/pLiterature/XL-FW10009UM_es-US.pdf#page=1).

9Drawbar and towing-eye coupling

A driver visually checks the coupling pin and its retainer in the towing-eye hitch between a stationary light truck and trailer, with the drawbar support lowered.
The key idea

Align the towing eye and check that your coupling pin is fully locked and secured.

Remember

  • Align the drawbar and adjust its height using the fitted system.
  • Only help manually with vehicles immobilised, keeping clear of the pin’s movement.
  • Approach slowly; stop and correct the position if it does not line up.
  • Check the pin’s full working position and its retaining device.
  • Check retention as that coupling’s manual requires.
  • Connect services and retract the support once the secured coupling supports the drawbar.

Exam trap: Wrong: Always use the fifth-wheel test. Right: Use the check prescribed for your drawbar coupling.

Read the full explanation
  • On a trailer with a towing eye, align the drawbar with the mouth of the lorry coupling and set it to the correct height using the system provided. Only assist manually with the vehicles immobilised and while keeping clear of the path of the coupling pin.
  • Prepare the automatic or manual coupling according to its design and bring the lorry closer slowly. If it is not aligned with the opening, stop the vehicle and correct the position by suitable means before continuing to couple.
  • Once the towing eye has entered, check that the pin is fully in its working position and secured against movement out of position. Observe the relevant locking indicator and check the accessible components according to the manual.
  • Complete the connections and retract the drawbar support once the coupling is secure and can support the drawbar correctly. Also carry out the retention checks specified for that coupling. Do not apply a fifth-wheel test without adaptation to a system whose manufacturer specifies a different way of checking that it is locked.

10Ball coupling head, if fitted

A person consults an illustrated manual while checking the ball coupling between a green light truck and an orange trailer with chocked wheels.
The key idea

If your authorised combination has a towball, check compatibility and locking as its manual requires.

Remember

  • If your authorised combination has a towball and coupling head, check compatibility.
  • Follow its manual to close the coupling and check retention.

Exam trap: Wrong: Towballs need no compatibility check. Right: If your authorised combination has a towball and coupling head, check compatibility and retention as its manual requires.

Read the full explanation
  • If your authorised combination has a towball and coupling head, follow the manual for that coupling to close it and check that it is secure; compatibility is also required for this system. [RGV, art. 13.1](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a13).

11Identify the air connections

A worker holds the red pneumatic coupling beside its socket, with the yellow line already connected between a light truck and a trailer with chocked wheels.
The key idea

Identify the air connections and brake controls actually fitted to your combination.

Fitted system or connectionFunction or check
Conventional pneumatic system: red lineAir supply
Conventional pneumatic system: yellow lineBrake control line
Overrun brake without pneumatic linesContinue with the appropriate electrical connections and breakaway device

Remember

  • Check markings; clean coupling heads and seals, checking seals fit correctly without damage.
  • Fit connections without forcing them and check they stay secured.
  • For manufacturer-documented conventional systems: yellow before red; follow combined connector blocks’ specific procedure.
  • See “Braking the trailer and the vehicle combination” for lines and controls.
  • Keep the towed vehicle’s parking brake applied while supplying air.
  • After connecting, check brake response with your combination secured; follow the manufacturer’s procedure.

Exam trap: Wrong: Your licence determines that your combination has air connections. Right: Identify the fitted equipment; an overrun brake system may have no pneumatic lines.

Read the full explanation
  • In a conventional pneumatic system, the red line supplies air and the yellow line transmits the braking control signal; the functions of both lines and of the parking and brake-release buttons are explained in «Braking the trailer and the vehicle combination», in the sections «Red supplies and yellow controls» and «Chambers, valves and electronic management».
  • Before connecting, check that the coupling heads are clean and that the seals are intact, properly seated and free from damage that prevents an airtight seal. Also examine the mating surface: an undamaged seal can leak air if it rests against dirt. If you find a defect, correct it before closing the connection.
  • Identify the markings on each coupling head and its connection point before joining them. Fit them without forcing them and check that they are secure using the method specified for the equipment. Work from a stable position with easy access, without leaning on the hoses or putting your hands between components that could move.
  • In the conventional system documented by the manufacturer, connect the yellow line first and then the red line; if you use a combined connector block, follow its specific procedure. Disconnection is covered in «Disconnect before withdrawing the towing vehicle». [ROJO Trailer, manual, section 4](https://www.rojotrailer.com/wp-content/uploads/2021/03/Manual-ba%C3%B1era-Espa%C3%B1ol-AluHARD-500-rev1.pdf#page=1).
  • Keep the towed vehicle’s parking brake applied when supplying air and check the actual state of the controls according to the equipment plate. After connecting, check the brake response using the procedure specified by the manufacturer, with the combination secured; then complete the moving test described in «Pressure and testing before moving off».
  • Adapt your list of connections to the trailer fitted: equipment with an overrun brake may have no pneumatic lines. In that case, continue with the appropriate electrical connections and breakaway device. The C1+E licence alone does not determine which circuit your combination has.

12Electrical and auxiliary connections

A person holds a plug by its body and aligns it with its socket beside another service connection already coupled between a light truck and its trailer, parked beside the kerb.
The key idea

Connect each plug to its correct socket and check that it works.

Connection, if fittedFunction
Lighting socketLighting and signalling
ABS/EBSElectronic braking

Remember

  • Identify each socket by its markings and shape.
  • Inspect contacts, covers and catches.
  • Hold plugs by their bodies; release catches before removing them.
  • Connect necessary services and secure those that must stay stowed.
  • For special circuits, follow pressure and disconnection instructions.
  • Resolve fault warnings even when your towed vehicle is empty.

Exam trap: Wrong: Working lights prove ABS/EBS is connected. Right: Check both connections if fitted.

Read the full explanation
  • Connect the towed vehicle’s lighting and signalling system and any electronic braking connectors fitted to the combination. Identify each socket by its markings and design, without inserting a connector into a different socket because it appears to be a similar size. The lighting socket and the ABS/EBS connection serve different functions; check both if fitted.
  • Check plugs, contacts, covers and latches, and hold the connector by its body when fitting or removing it. Align it with the socket before inserting it and release its retaining devices before pulling it out.
  • Connect any additional services the equipment needs for driving or operation and secure those that must remain stowed. If there are hydraulic lines or other special circuits, follow the manufacturer’s disconnection and pressure requirements.
  • Check actual operation after connecting. If a connection or braking fault warning appears, identify what it means and resolve the fault even if the towed vehicle is travelling empty.

13Secure hoses with enough freedom of movement

A light truck with a trailer is stationary in a paved yard, with the hoses and cable secured at both ends and a slack curve between the supports, above the drawbar and the ground.
The key idea

Secure your cables and hoses with enough slack for turns and suspension movement.

Remember

  • Check the entire route of each cable and hose.
  • Leave enough free length for turns and suspension movement.
  • Prevent dragging, rubbing against tyres or trapping.
  • Stow excess length using the fittings provided.
  • Check that both ends stay secured.
  • Do not let connections bear the whole cable or hose’s weight.

Exam trap: Wrong: Tight hoses prevent dragging. Right: Use the proper supports and leave enough freedom for movement.

Read the full explanation
  • Arrange the cables and hoses with enough free length for the expected turns and suspension movements. Check the route between both ends, not just the area visible from one side.
  • Prevent the lines from dragging on the ground, rubbing against the tyres or becoming trapped between the surfaces of the fifth wheel, chassis and towed vehicle. Secure excess length using the fittings provided.
  • Keep the ends secured, route the lines safely and ensure that the supports work as intended. Leave the slack needed for articulation between the designated securing points, without making the connections bear the weight of the entire line.

14Breakaway cable and secondary coupling

A person checks the orange breakaway cable, attached between a light truck and its trailer’s brake mechanism, with slack and clear of the ground.
The key idea

Check your fitted safety device; see “Braking the trailer and the vehicle combination”.

1,500 kgSecondary coupling: conditional MMA limit

Remember

  • Attach the fitted device after securing the main coupling and before moving off.
  • Use the specified attachment point; check that the end fitting is closed and secured.
  • Allow turns without dragging, snagging or pulling the device taut.
  • Check its entire route and attachment to the towed vehicle.
  • Check before retracting the support if access becomes harder afterwards.
  • After testing brakes, check its position and correct any installation problems.

Exam trap: Wrong: Retract the support and drive off without checking the fitted cable. Right: Check its route and attachment before moving off; check before retracting the support if access becomes harder afterwards.

Read the full explanation
  • You study the difference between a breakaway cable and a secondary coupling, including the case of an MMA (maximum authorised mass) not exceeding 1,500 kg without guaranteed braking if the coupling breaks, in «Braking the trailer and the vehicle combination», section «Secondary chain and breakaway cable». [RGV, art. 13.4](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a13).
  • When coupling, fit whichever breakaway cable or secondary coupling your trailer has after securing the main coupling and before preparing to move off. Attach it to the point specified by the manufacturer and check that the end fitting is closed and secured; use the routing and attachment method specified for that device.
  • Allow freedom for articulation without the cable dragging, snagging or pulling the mechanism taut during a normal turn. Check its entire route and its anchorage to the towed vehicle, paying attention to where it crosses the drawbar and lines. Carry out this check before retracting the support if doing so makes access more difficult afterwards.
  • When checking the brakes after connection, also check that the cable is in its normal operating position and that no operation has pulled it taut or displaced it. If you find a loose end fitting or a route that prevents proper articulation, correct the installation before proceeding to the final check of the combination.

15Landing legs and jockey wheel

A worker checks the raised jockey wheel of a trailer coupled to a light truck parked beside a kerb.
The key idea

Retract and secure your supports once the secured coupling correctly supports the towed vehicle.

Component on your towed vehicleFunction
Landing legs or specified supportSupports the front weight when you separate the vehicles
Parking brakeRestrains the wheels

Remember

  • Retract landing legs only once the secured coupling correctly supports the front.
  • Check both sides, ground clearance and retaining devices.
  • Stow and secure the crank handle in its holder.
  • If fitted, raise your jockey wheel and lock its mounting as instructed.
  • Check that the wheel cannot lower, rub or come loose.

Exam trap: Wrong: Partly lowered legs improve stability while driving. Right: Fully retract and secure them once the secured coupling correctly supports your semi-trailer.

Read the full explanation
  • Fully retract the semi-trailer's landing legs once the coupling is secured and has correctly taken over support of the front end. Check both sides, ground clearance and the mechanisms' retaining devices. [SAF-HOLLAND, FW35 manual, §§ 3 and 6-8](https://safholland.com/mx/es/servicio/centro-de-descargas/document/resource/environment/project1_p/documents/documentationP/Before%2520Empolis%2520Box%2520update/pLiterature/XL-FW10009UM_es-US.pdf#page=1).
  • Stow the winding handle and secure it in its holder. A loose handle or a partially extended leg can strike an obstacle during a turn or a change of gradient.
  • If the trailer has a jockey wheel, raise it, retract the assembly and lock its mounting as required for that model. Check that it cannot drop, turn far enough to rub against a component or come loose through vibration.
  • When separating the vehicles, use the supports to carry the vertical load at the front end; use the parking brake to hold the wheels. Use and position the supports intended for your towed vehicle: a jockey wheel and semi-trailer landing legs have different capacities and securing mechanisms.

16Final walk-round check

A helper observes the two illuminated brake lights on a light truck’s trailer while the driver remains in the cab and the combination is stationary with wheel chocks in a paved area.
The key idea

Check your lights, connections and possible obstructions before preparing to move off.

Remember

  • Test position lights, indicators, hazards, brake lights and all other fitted lights.
  • Use help or checking equipment without leaving a moving vehicle unattended.
  • Look for trapped cables, caught covers and forgotten tools.
  • Check that nothing prevents movement between the vehicles when turning.
  • Remove chocks when you can keep the combination secure without them.
  • Stow them in their holder before driving again.

Exam trap: Wrong: A lit lamp proves all lighting works. Right: Test every fitted function.

Read the full explanation
  • Check the towed vehicle's lighting by operating the relevant functions: position lights, direction indicators, hazard warning lights, brake lights and the other lights fitted. Use assistance or the available checking equipment without leaving the vehicle unattended while it is moving. One illuminated lamp does not prove that all functions are correctly connected.
  • Check that coupling has not left a cable pinched, a cover trapped or a tool on the chassis. Also check that nothing prevents articulation between the vehicles. You study the general inspection of tyres, loads and equipment in «Maintenance and inspection of the vehicle combination»; here you must identify anything the coupling operation has left unsafe.
  • Remove the wheel chocks from the road when the combination is ready to move off and you can keep it secure without them; stow them in their holder before resuming driving. [RGC, art. 92.3.d](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a92).

17Pressure and testing before moving off

A driver performs a brake test with a light truck and a coupled orange trailer in a clear paved yard, with the trailer brake lights illuminated.
The key idea

Check air pressure, leaks and brake response before driving.

Remember

  • Wait for the air system to reach the manufacturer’s specified operating conditions.
  • Check pressure and braking warnings.
  • For persistent leaks or abnormal pressure drops, immobilise and correct the fault.
  • Test your brakes very slowly in a safe area.
  • First retract supports and remove chocks as the procedure requires.
  • Move off smoothly; stop safely and inspect after knocks, warnings or unexpected movement.

Exam trap: Wrong: No visible leaks means you can drive. Right: Also check the air reserve, warnings and brake operation.

Read the full explanation
  • Wait until the pneumatic system reaches the operating conditions specified by the manufacturer and check the pressure and braking warnings. A connection with no visible leaks does not, on its own, prove that you have the reserve needed for safe driving.
  • Check for leaks using the prescribed methods, paying attention to leaks at the connections you have just made. If you hear a persistent leak or notice an abnormal pressure drop, immobilise the combination and correct the fault before considering it ready.
  • Carry out a functional braking test at very low speed in a safe area, once you have retracted the supports and removed the wheel chocks in accordance with the procedure. Check that the combination responds normally and stop if you notice jerking or abnormalities.
  • Move off gently and observe the behaviour of the towed vehicle and the connections. If you notice an abnormal knock at the coupling, a warning or an unexpected movement, stop safely and check.

18Prepare to uncouple

A light truck and its trailer stand aligned on firm, level ground, with the trailer wheels chocked and the drawbar support lowered before uncoupling.
The key idea

Secure your towed vehicle and its supports before separating it from your lorry.

Remember

  • Choose somewhere your towed vehicle can stand safely and be coupled again.
  • Avoid edges, unstable covers and ground that could give way.
  • Align your combination and avoid tension in the coupling.
  • Keep the towed vehicle’s independent parking brake applied throughout separation.
  • Lower supports and adjust height without drops or overloading.
  • Prepare storage for cables and hoses clear of your lorry’s path.

Exam trap: Wrong: You can skip the towed vehicle’s parking brake once the air connections are removed. Right: Keep it independently immobilised throughout separation, even after removing the air connections.

Read the full explanation
  • Choose the uncoupling location with regard to how the towed vehicle is left on its own and how you can couple it again. Avoid placing supports on edges, unstable covers or surfaces that may give way.
  • Leave the combination aligned and without unnecessary strain on the coupling. Prepare to secure the towed vehicle independently using the controls and equipment described in «Immobilise before leaving the cab»; keep it secured throughout separation, even when you remove the pneumatic connections.
  • Lower the semi-trailer's landing legs or the drawbar support and check that they are firmly seated. Adjust the height so that you can separate the vehicles without dropping, dragging or overloading the legs. Carry out any suspension movement specified in the manual while monitoring the support and keeping the entire area clear.
  • Prepare the holders where you stow each connector and hose when you disconnect them. Position them within reach of the safe working area, so that you can stow the lines without leaving them on the ground or laying them across the towing vehicle's path.

19Disconnect before withdrawing the towing vehicle

A worker checks the disconnected and stowed pneumatic and electrical connections of a chocked trailer with its support lowered, still coupled to a light truck.
The key idea

Disconnect and stow your connections with the towed vehicle immobilised and supported.

Remember

  • Immobilise and support your towed vehicle before disconnecting.
  • For the conventional system documented by the manufacturer, disconnect red before yellow.
  • Keep your face and eyes away from air outlets.
  • Release electrical catches and hold each plug by its body.
  • Protect and stow all connections, including extras, clear of the ground and wheels.
  • Release breakaway cables or secondary couplings at the specified stage, after securing the vehicle.

Exam trap: Wrong: Start mechanical separation with a hose connected. Right: Start only when your lorry can withdraw without stretching any line.

Read the full explanation
  • With the towed vehicle immobilised and supported, disconnect the services according to the equipment procedure. In the conventional system documented by the manufacturer, disconnect the red supply line first and then the yellow control line. Keep faces and eyes away from air outlets and protect the mating surfaces from dirt. [ROJO Trailer, manual, section 8](https://www.rojotrailer.com/wp-content/uploads/2021/03/Manual-ba%C3%B1era-Espa%C3%B1ol-AluHARD-500-rev1.pdf#page=1).
  • Disconnect the electrical and electronic braking plugs by releasing their retaining clips and holding the plug bodies. Fit caps and guards where required.
  • Stow the ends in the designated holders, without leaving them on the ground or on the wheel arch. Also check any additional equipment connections. Do not begin mechanical separation until you can withdraw the towing vehicle without stretching any line that still connects it to the towed vehicle.
  • On systems with a breakaway cable or secondary coupling, release them at the stage specified for uncoupling, after securing the towed vehicle. Stow them so that they do not drag.

20Open the lock and separate under control

A driver operates the coupling lever from the side of a light truck with a trailer, with the wheels chocked and the drawbar resting on a support.
The key idea

Finish preparation and disconnection before opening your coupling and moving the lorry away slowly.

Remember

  • Finish preparation and disconnection before releasing the safety device and opening the lock.
  • Operate the handle from the designated safe position.
  • Keep clear of parts that could descend as the fifth wheel unloads.
  • If it will not open, secure both vehicles and investigate without forcing it.
  • Move forwards slowly; watch for supports sinking or moving.
  • If instructed, stop while the chassis still protects the semi-trailer.

Exam trap: Wrong: Force a stuck handle. Right: Secure both vehicles, investigate and follow the manual; with a towing eye, confirm the pin releases the coupling before moving away.

Read the full explanation
  • Once you have completed preparation and disconnection, release the safety lock and open the retaining mechanism. Operate the lever from the designated safe position. Keep clear of the front area and any components that may drop when you take the load off the fifth wheel.
  • If the lock does not open, investigate the cause with both vehicles secured. There may be tension in the coupling or a fault in the mechanism; do not strike it, force it or keep the safety lock overridden as a solution. Follow the manual for any manoeuvre to take the load off the coupling, and ensure that no one is in the danger zone.
  • Move forwards slowly and, where the procedure requires it, stop with the chassis still in its protective position to check that the supports are bearing the semi-trailer correctly. Watch that the feet do not sink or shift. [SAF-HOLLAND, FW35 manual, §§ 3 and 6-8](https://safholland.com/mx/es/servicio/centro-de-descargas/document/resource/environment/project1_p/documents/documentationP/Before%2520Empolis%2520Box%2520update/pLiterature/XL-FW10009UM_es-US.pdf#page=1).
  • With a towing-eye coupling, follow the specified procedure for opening and releasing the pin. Confirm that the coupling is free before moving the towing vehicle away.

21Check the detached towed vehicle

A person inspects a trailer detached from a light truck, standing level on its support with chocked wheels, a protected connector, and cables and chains stowed on the drawbar.
The key idea

Check your detached vehicle’s stability and prepare your lorry before leaving.

Remember

  • Check the towed vehicle’s angle and how its supports rest.
  • Look for signs of movement or sinking.
  • If stability is doubtful, prevent dangerous access and request help.
  • Protect connectors; stow the drawbar, cable and chains without creating obstacles.
  • Keep controls accessible for coupling again.
  • Before driving, stow your lorry’s lines and position its coupling as required.

Exam trap: Wrong: Only check the detached vehicle. Right: Also check your lorry’s lines, accessories and coupling before moving it.

Read the full explanation
  • After separation, check the tilt of the towed vehicle, how its supports are seated and any signs of movement or sinking. If stability is doubtful, prevent access to the danger zone and request help to correct the support using suitable means.
  • Check that the connectors are protected and that the drawbar, breakaway cable and chains are stowed without creating obstacles. Keep the controls you need for recoupling accessible.
  • Before driving on with the towing vehicle alone, check its stowed lines and accessories. Ensure that no coiled line is hanging down and that the coupling is in the specified position for driving without a towed vehicle. Include both the vehicle that remains parked and the one you are about to move in your final check.

22Manoeuvre M in the test

A light truck is aligned ahead of a detached trailer, secured with wheel chocks and resting on its support, on a driving test practice area.
The key idea

In manoeuvre M, prepare separation and coupling as the test requires.

10 mMinimum test coupling preparation distance

Remember

  • Leave your towed vehicle immobilised and your semi-trailer on its supports.
  • Leave your lorry beside it, out of alignment.
  • Then position it ahead, at least 10 m away, to couple in reverse.
  • Connect coupling, lighting and safety devices; retract supports and stow chocks as required.
  • During the reversing approach, you may get out once with your lorry immobilised.
  • If coupling is not automatic, you may manually align the drawbar during that check.

Exam trap: Wrong: Every coupling must start 10 m away. Right: This minimum preparation distance applies to manoeuvre M in the test.

Read the full explanation
  • In manoeuvre M for C1+E, leave the towed vehicle immobilised and the semi-trailer on its supports, with the towing vehicle alongside and out of line. Then position the towing vehicle in front, at least 10 metres away, to couple by reversing. This is a test preparation distance, rather than a gap you must reproduce in every everyday operation. [RGCond, Annex VI, manoeuvre M](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#anvi).
  • Connect the coupling, lighting and safety components, remove and stow any wheel chocks used, and retract the supports, as appropriate. During the reversing approach in the test, you may get out once to make the necessary checks and, if the coupling is not automatic, align the drawbar manually; do this with the towing vehicle immobilised. [RGCond, Annex VI, manoeuvre M](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#anvi).

Coupling a semi-trailer with a fifth wheel

Reference sequence for conventional equipment; follow the manufacturer’s detailed instructions.

  1. Choose firm ground, clear the surrounding area and immobilise the semi-trailer using its parking brake and any necessary wheel chocks.
  2. Inspect the kingpin and fifth wheel; prepare the lock and check height and alignment.
  3. Reverse slowly until coupling is complete and immobilise the towing vehicle before leaving the cab.
  4. Check seating, kingpin retention, the lock and safety catch; carry out the prescribed gentle test.
  5. Connect the electrical and auxiliary connections; on the conventional system documented by the manufacturer, connect the yellow line first and then the red line.
  6. Fully retract the landing legs and stow the winding handle; check the routing and securing of the lines.
  7. Check lights, pressure, warnings and controls against the equipment plate; prepare to move off and remove and stow the wheel chocks while keeping the combination secured.
  8. Carry out the functional brake test at very low speed in a safe place and move off gently.

Coupling a trailer with a drawbar and towing eye

Secure the lock before retracting the trailer support.

  1. Immobilise both vehicles and check compatibility, components and the working area.
  2. Align the drawbar and adjust its height using the means provided.
  3. Couple the towing eye and pin as required by the device.
  4. Check the lock, retention, safety catch and indicators, and carry out the prescribed mechanical check.
  5. Connect the auxiliary connections and attach the breakaway cable or secondary coupling fitted to the trailer.
  6. Retract and lock the jockey wheel or drawbar support and check that nothing drags.
  7. Check lights, brakes and connections; stow the wheel chocks when appropriate and test the combination in a safe place.

Uncoupling without losing support or immobilisation

Ensure the towed vehicle is supported and remains stationary before releasing the coupling.

  1. Choose ground that can bear the weight, align the combination and secure the towing and towed vehicles separately.
  2. Apply the towed vehicle’s own parking brake, check that it is immobilised and position any necessary wheel chocks.
  3. Lower the landing legs or drawbar support and check that they can support the vehicle when uncoupled.
  4. Disconnect and stow the auxiliary connections as required by the equipment; on the conventional system documented by the manufacturer, disconnect the red line first and then the yellow line.
  5. Disconnect the breakaway cable or secondary coupling when applicable and confirm that no lines remain connected.
  6. Release the safety catch and open the mechanical lock following the manual.
  7. Separate slowly; check the support as you withdraw, following the procedure.
  8. Confirm stability, braking, protected connectors and stowed accessories on both vehicles.

Finished this module?

Mark it as read and you will see your progress on the theory list.

Next module