Theory · A1 Licence - 125 cc Motorcycle · Module 6 of 18

Motorcyclist protective equipment

You learn to distinguish mandatory equipment from recommended protection, and how to choose, adjust and care for your helmet and motorcycle clothing. You can answer A1 questions about gloves, footwear, visibility, airbags and passenger equipment, distinguishing ordinary riding from practical tests. You also study seat belts, head restraints and child restraint systems, which are part of the common theory test.

32 min read22 sectionsReviewed Nov 3, 2026
A rider and passenger travel to the right on a lightweight motorcycle wearing full-face helmets, protective jackets, gloves, trousers and boots on a Mediterranean road.
Protective equipment for rider and passenger

1Mandatory equipment on an A1 motorcycle

A rider and a female passenger wearing fastened helmets, gloves and boots travel on a motorcycle in the right-hand lane of a rural road, with both wheels clear of the edge line.
The key idea

Wear your helmet, gloves and closed footwear as required for the road.

one yearCertified helmet on a moped
1 October 2026Transition period starts
Motorcycle equipmentWhere you must wear it
Helmet approved under UNECE R22, fastenedEvery road
Protective glovesInterurban roads
Closed footwear covering your whole footEvery road

Remember

  • Wear a helmet approved under UNECE R22, fastened, on every road.
  • Your passenger must follow these requirements too.
  • A sidecar does not remove the helmet requirement.
  • Adding a motorcycle jacket, trousers, boots and airbag is recommended.
  • With AM included, you and your passenger can use certified helmets on mopeds.
  • For one year from 1 October 2026.

Exam trap: Wrong: you can remove your helmet for short town journeys. Right: wear it on those journeys too.

Read the full explanation
  • You must wear an approved protective helmet compliant with UNECE Regulation R22, properly fastened, on every road. This requirement also applies to your passenger and to motorcycles with a sidecar. [RGC, art. 118.1.a](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a118) If you ride a moped under the AM entitlement included with your licence, you and your passenger may wear a certified helmet for one year from 1 October 2026. [RD 518/2026, first transitional provision and third final provision](https://www.boe.es/buscar/doc.php?id=BOE-A-2026-13889) [RGCond, art. 5.2.a](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#a5)
  • You must wear protective gloves when riding on roads outside built-up areas, and closed footwear that covers the whole foot on every road. Both requirements apply to the rider and passenger. [RGC, art. 118.1.b and c](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a118)
  • For riding, it is recommended that you complete the mandatory equipment with a jacket, trousers, boots and a motorcycle airbag. The equipment required for practical tests is explained at the end of this module.

2Exemption for a protective structure and seat belts

A helmetless driver wearing a fastened seat belt rides to the right on a motorcycle with a protective safety structure along a road in a Mediterranean landscape.
The key idea

You can replace helmet, gloves and closed footwear with a seat belt only under specific conditions.

Remember

  • Check that your vehicle has a protective structure and seat belts.
  • Both must appear on its technical inspection card or moped specification certificate.
  • Under this exemption, wear your seat belt on every road.
  • A windscreen, roof or sidecar alone is not enough.
  • A medical certificate does not allow helmet-free riding on an ordinary motorcycle.

Exam trap: Wrong: a windscreen lets you remove your helmet. Right: you need a protective structure and seat belts, both recorded on the technical inspection card or moped specification certificate, and must wear the belt.

Read the full explanation
  • You may use the exemption from wearing a helmet, gloves and closed footwear if the vehicle has a protective structure and seat belts, and these features are recorded on the vehicle inspection card or the moped's certificate of characteristics. You must then wear the seat belt on every road. [RGC, art. 118.1](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a118)
  • The protective structure must be identified as such in the technical documents. Windscreens, roofs and sidecars can have different functions and designs; their appearance alone does not prove that the documented conditions for this exemption are met.
  • The exemptions under Article 119 for medical certificates concern seat belts and other approved restraint systems; they do not authorise you to ride an ordinary motorcycle without a helmet. [RGC, art. 119](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a119)

3Common safety: seat belts, head restraints and child protection

A woman wearing a seat belt with her headrest adjusted drives a car to the right, with a child secured in a child safety seat in the rear seat.
The key idea

Use and adjust the protection required for your vehicle and its occupants.

135 cmChild seat height limit
nine seatsMaximum for this child rule
Case in vehicles with up to nine seats, including the driverWhat you must do
Children under 18, no taller than 135 cmUse an approved child restraint suited to height and weight, fitted in the rear.
Front-seat exceptionsNo rear seats; rear seats occupied by other such children; or not all restraints fit in the rear.
Rear-facing child seat in frontDeactivate that seat’s frontal airbag.

Remember

  • If fitted, fasten your seat belt on every road, unless a legal exemption applies.
  • Adjust your belt without twists or slack; adjust the head restraint as instructed.
  • Fit child restraints behind for children under 18 and 135 cm or shorter.
  • Front seats are allowed only under one of the three exceptions in the table.
  • Deactivate the front airbag for rear-facing seats; motor tricycle rules also apply.
  • For child transport, see “Passengers and loads on motorcycles”.

Exam trap: Wrong: you can use a rear-facing front child seat with its airbag active. Right: deactivate that seat’s frontal airbag; the child may sit in front only under a stated exception.

Read the full explanation
  • As a driver or passenger, you must fasten an approved seat belt on urban and interurban roads if the vehicle is fitted with one, unless a regulatory exemption applies. Adjust the belt across your pelvis and shoulder, without slack or twists. [RGC, art. 117.1](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a117)
  • A head restraint reduces the risk of neck injury in a rear-end collision. If you occupy a seat fitted with one, adjust its height and distance from your head in accordance with the vehicle instructions. [DGT, occupant safety](https://www.dgt.es/muevete-con-seguridad/viaja-seguro/en-coche/)
  • In vehicles with up to nine seats, including the driver's, children aged under 18 who are 135 cm tall or shorter must use an approved child restraint suitable for their height and weight, fitted in the rear. They may travel in the front if there are no rear seats, all rear seats are occupied by these children, or there is not enough room for all the child restraints in the rear. [RGC, art. 117.1 and 3](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a117)
  • If you fit a rear-facing child seat in the front, you must deactivate the front airbag for that seat. Fit the child restraint in accordance with the manufacturer's instructions. [RGC, art. 117.3 and 4](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a117)
  • If you ride a motor tricycle authorised for A1, Article 118.1 also applies: it expressly includes three-wheeled vehicles. For its occupants, the exemption is the one described in “Exemption for a protective structure and seat belts”. The rules for carrying children on a motorcycle are covered in “Passengers and loads on motorcycles”. [RGC, art. 118.1](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a118)

4Passive safety and equipment limitations

A rider wearing a full-face helmet, a fastened jacket, gloves, protective trousers and boots rides a 125 cc motorcycle to the right, with both wheels inside the lane and clear of the edge line.
The key idea

Your equipment reduces injuries but cannot prevent every injury.

Safety typePurposeExamples
ActiveHelps you avoid accidentsBrakes and tyres
PassiveReduces the effects of an accidentHelmet and protective clothing

Remember

  • Protect your head, hands, torso, legs and feet.
  • Your body is exposed on a motorcycle.
  • Keep your clothing correctly positioned and fastened throughout your journey.
  • Do not take greater risks because you have good equipment.

Exam trap: Wrong: good equipment lets you take greater risks. Right: it cannot guarantee protection against fractures or internal injuries.

Read the full explanation
  • On a motorcycle, you do not have the protective passenger compartment of a car, and your body is exposed to impact and being dragged along the road. Protect your head, hands, torso, legs and feet as a whole: leaving one area uncovered leaves it exposed even if your other garments are excellent.
  • Your helmet and protective clothing are passive safety equipment: they reduce the consequences of a fall or collision. Brakes and tyres contribute to active safety, which helps prevent an accident.
  • Your equipment can reduce impact injuries, abrasions and friction burns, but it cannot guarantee that you avoid all fractures or internal injuries. Nor can you treat good protection as permission to take greater risks; performance is assessed under specific test conditions.
  • Choose your equipment with your everyday journeys on your 125 cc motorcycle in mind: you need to be able to carry it and store it when you arrive, then put it on again for the return journey. Comfort and ease of use help you maintain protection throughout the journey.

5Helmet approval and identification

A person examines the label on a motorcycle helmet strap beside a 125 cc motorcycle parked at the kerb.
The key idea

Check the label proving your helmet is approved for motorcycle use.

Remember

  • Look for the approval label and manufacturer and model details.
  • An E followed by a number identifies the country granting approval.
  • That number does not show size or quality.
  • Try the size and read the instructions before buying.
  • Keep the documents to choose compatible replacement parts.

Exam trap: Wrong: a high price or sporty look guarantees approval. Right: check the motorcycle approval label.

Read the full explanation
  • Locate the approval label and the manufacturer's and model identification on the helmet. Check that they are legible and match the product you are buying; this allows you to look up its features and specific instructions for use. [DGT, helmet identification](https://www.dgt.es/export/sites/web-DGT/.galleries/downloads/conoce_la_dgt/que-hacemos/educacion-vial/adultos/no-formal/airbag.pdf)
  • The approval marking may include an E followed by a number identifying the country that granted approval. That number is not a quality rating or a size; distinguish it from the approval number and the product's serial number. [DGT, approval label](https://www.dgt.es/export/sites/web-DGT/.galleries/downloads/conoce_la_dgt/que-hacemos/educacion-vial/jovenes/ESO_educacion_vial/ALUMNOS-U4-EL-CICLOMOTORISTA-USO-CASCO.pdf)
  • Choose a retailer that lets you check the marking, try the size and consult the instructions. A sporty appearance or a high price alone tells you nothing about which tests the helmet has passed. Keep the documents so you can identify compatible replacement parts.

6Full-face, open-face and modular helmets

A rider wearing a green full-face helmet with the visor closed rides an orange motorcycle to the right within their lane on a two-way road in a Mediterranean landscape.
The key idea

Prefer a full-face helmet and use only the riding positions allowed for your helmet.

Helmet typeWhat you should remember
Full-faceCovers your head, jaw and chin
Open-face or jetLeaves more of your face exposed
ModularRide only in positions allowed by its approval and instructions

Remember

  • A full-face helmet is recommended because it covers more of your head and face.
  • Check that you can close and lock the visor and chin bar.
  • Consider face protection as well as comfort.

Exam trap: Wrong: you can ride with any modular helmet open. Right: follow the configuration allowed by its approval and manufacturer’s instructions.

Read the full explanation
  • For protection, a full-face helmet is recommended: it covers your head and also the lower part of your face, jaw and chin. The visor adds eye protection from air and particles; consider the coverage of the whole helmet as well as comfort. [DGT, motorcyclist equipment](https://revista.dgt.es/es/reportajes/2016/07JULIO/0715en-moto-bien-equipado.shtml)
  • An open-face or jet-style helmet leaves more areas of your face exposed. Its approval confirms the performance of its design, but it does not add a chin guard that it does not physically have. Distinguish between a “permitted helmet” and a “helmet with greater coverage”.
  • With a modular helmet, you can raise the front section to make certain tasks easier. When riding, you must follow the configuration allowed by its approval and the manufacturer's instructions; the fact that the section can be raised does not mean that every position is authorised while riding.
  • Check that you can close and lock the visor and chin guard correctly without changing the fit of the helmet.

7Helmet construction, replacement and care

A motorcyclist hands a cracked orange helmet to a technician holding a new one, beside a 125 cc motorcycle parked facing left with the kerb on its right.
The key idea

Replace your helmet after a significant impact, even if it looks undamaged.

Helmet partPurpose
Outer shellSpreads impact and resists penetration and scraping
Energy-absorbing layerDeforms to absorb energy
Fabric paddingProvides comfort and fit

Remember

  • After a significant impact, replace your helmet even without visible damage.
  • If you drop it empty or doubt an impact, consult the manufacturer.
  • Avoid helmets whose history you do not know.
  • Follow the manufacturer’s service life and care instructions.
  • Do not drill your helmet or alter its layers or attachment points.
  • Store it safely; check the fastening, ventilation and inside before wearing it.

Exam trap: Wrong: replacing the pads restores an impacted helmet. Right: this cannot repair a damaged absorbing layer; replace the helmet after a significant impact.

Read the full explanation
  • The outer shell spreads the impact and resists penetration and abrasion. Beneath it, the energy-absorbing layer, usually made of expanded polystyrene (EPS), deforms to absorb energy; the textile lining provides comfort and fit.
  • Replace your helmet after a significant impact, even if you cannot see any external damage. Replacing the pads does not restore the capacity of a damaged energy-absorbing layer.
  • If you drop the helmet while it is empty or are unsure whether it has suffered an impact, consult the instructions and the manufacturer to assess whether it needs replacing. Avoid helmets from unknown sources if you cannot establish their impact and storage history.
  • Check the straps, padding and materials, and follow the service life specified by the manufacturer. There is no universal legal expiry period for all helmets.
  • Clean the visor, lining and shell using the method and products authorised by the manufacturer. Do not drill the shell, cut the energy-absorbing layer or modify the fittings; check that paints, adhesives and accessories are compatible.
  • Store it where it cannot fall or be knocked, and use compatible replacement parts. Before putting it on, check the fastening, ventilation and inside.

8A size that fits your head

A motorcyclist wearing glasses checks the fit of her fastened helmet with both hands beside a lightweight motorcycle parked in a roadside parking bay.
The key idea

Try a helmet that fits firmly and comfortably without blocking your view.

Remember

  • Try your helmet in person.
  • It should fit firmly, without gaps or painful pressure.
  • Check that it covers your forehead without dropping over your eyes.
  • Move your head: your helmet should not turn independently.
  • Check that you can see clearly to the sides.
  • If you wear prescription glasses, try them with your helmet on.

Exam trap: Wrong: buy a large helmet for comfort. Right: choose the correct size and shape, without gaps or painful pressure.

Read the full explanation
  • You must try the helmet on in person and check the fit all the way around. It must fit firmly, without gaps and without concentrating painful pressure on your forehead or anywhere else. Comfort comes from choosing the right size and shape, not from buying one that is too large.
  • Wear it in the intended position: it must cover your forehead above your eyebrows and must not drop over your eyes. Move your head to check that it does not rotate independently or slip down and obstruct your vision. Also check that you have sufficient side vision.
  • If you wear prescription glasses, try them on with the helmet in place. The arms must fit without excessive pressure, and the frames must stay in position. If a helmet forces your glasses out of place or reduces your field of vision, you need a different size, adjustment or model.
  • Wear the helmet for long enough during the fitting test to notice discomfort that may not appear as soon as you put it on. Consider the shape of the inside as well as the stated circumference: two helmets with the same nominal size may fit your head differently.

9A correctly adjusted strap and fastening

A motorcyclist checks the fastening of the snug strap beneath her chin with both hands beside a motorcycle parked at the kerb.
The key idea

Fasten and adjust your helmet strap so your helmet cannot come off easily.

Remember

  • Fasten your helmet every time you wear it.
  • Adjust the strap without restricting breathing or head movement.
  • Without hurting yourself, check you cannot easily pull off your fastened helmet.
  • If it moves too much, adjust the strap or change size.
  • Check the strap, attachment points and buckle.
  • Help your passenger check their fastening if needed.

Exam trap: Wrong: closing the buckle is enough with a loose strap. Right: adjust the strap too, so your helmet stays secure.

Read the full explanation
  • Adjust the strap length according to the fastening instructions. It must fit snugly under your jaw without making it difficult to breathe or move your head. Secure the loose end using the fitting provided so that it does not flap or cause discomfort while riding.
  • With the helmet fastened, pull it firmly to check that you cannot remove it easily, without hurting yourself. If it moves too much, adjust it again or change size. A helmet that comes off in the first impact leaves your head exposed to subsequent impacts.
  • Check the strap, fittings and buckle: they must have no cuts or locking faults. Learn how to use your type of fastening before riding, and check your passenger’s fastening too if they need help.

10Visors, goggles and ventilation

A motorcyclist wipes their helmet visor with a cloth beside a motorcycle parked in a paved area off the roadway.
The key idea

Keep your view clear with a visor and goggles suitable for the light.

Remember

  • Keep your visor clean and free from significant scratches.
  • Do not use a dark visor at night or in poor light.
  • If your helmet has no visor, purpose-made protective goggles are recommended.
  • Do not assume ordinary sunglasses give the same protection.
  • Use compatible ventilation and anti-fog systems.
  • If you cannot see clearly, stop somewhere safe to solve the problem.

Exam trap: Wrong: use a dark visor against headlights at night. Right: choose a visor suitable for poor light.

Read the full explanation
  • Keep the visor clean and free of significant scratches. Scratches scatter light and can impair your vision and increase glare, especially from oncoming headlights. Even a scratch-resistant visor can deteriorate and need replacing.
  • Choose a visor that lets you see in the expected light conditions. A dark visor reduces the light reaching your eyes and is unsuitable at night or when lighting is insufficient. If it is marked for daytime use, observe that restriction.
  • If your helmet has no visor, it is recommended that you wear goggles specifically designed to protect against wind, insects and particles. Choose a model compatible with your helmet, securely fitted and with a sufficient field of vision; ordinary sunglasses do not necessarily provide this protection.
  • Use ventilation and anti-fog systems compatible with your helmet. Keep your prescription glasses clean too: the visor does not replace any vision correction you need.
  • If fogging, dirt or reflections prevent you from seeing, stop in a safe place to deal with the problem. Prepare a visor suitable for the lighting conditions throughout your journey.

11Motorcycle jackets and trousers

A rider wearing a full-face helmet, a green jacket and long trousers with protective pads, gloves and boots rides an orange motorcycle in their lane on a road through a Mediterranean landscape.
The key idea

Choose motorcycle clothing that covers your skin and keeps protectors in place.

Remember

  • A motorcycle-specific jacket and trousers are recommended.
  • Choose long sleeves and legs with protection against scraping.
  • Try them in your riding position; check you can reach the controls.
  • Check that protectors stay in place when you move.
  • Close zips, cuffs and adjusters as instructed.
  • Check that you stay covered when leaning or stretching your arms.

Exam trap: Wrong: tough-looking jeans must protect you. Right: check they are motorcycle clothing and what protection they offer.

Read the full explanation
  • To protect yourself while riding, it is recommended that you choose motorcycle-specific jackets and trousers, with long sleeves and legs and protection against abrasion. If you fall, you may slide along the road surface: a T-shirt, shorts or ordinary cotton clothing leave your skin exposed or do not provide sufficient protection for this use.
  • Try both garments on in the riding position. You must be able to reach the controls, bend your elbows and knees and turn your head freely, while the protectors stay over the areas they are designed to cover. An excessively loose garment may allow them to move out of place.
  • Fasten zips, cuffs and adjustments according to their instructions. Check that the jacket and trousers keep you covered when you lean or stretch your arms. If they have a compatible connecting system, use it as instructed by the manufacturer to help keep the outfit in place.
  • The appearance of a pair of jeans does not by itself tell you how resistant they are. Some motorcycle garments look like everyday clothing, while ordinary garments do not provide protective performance. Check what they are designed for and what protection they provide; do not judge by colour or style alone.

12Leather, technical fabrics and marking

A motorcyclist examines a protective jacket with a completely blank label beside a 125 cc motorcycle parked next to a road.
The key idea

Compare each garment’s verified protection as well as its material.

Motorcycle clothing materialWhat you must check
LeatherVerified protection, condition, fit and intended use
Technical fabricVerified protection, condition, fit and intended use

Remember

  • Read each product’s label and instructions.
  • Check protection, fit, condition and intended use.
  • Assess the fabric and protectors together.
  • Inspect materials: use and sunlight can damage them.
  • Choose ventilation and waterproofing suitable for your journey.

Exam trap: Wrong: any leather protects better than any technical fabric. Right: compare each garment’s verified performance.

Read the full explanation
  • You can choose leather or technical fabrics suitable for motorcycling. Compare their certified performance, condition, fit and intended use. It is not correct to claim that all leather protects better than all textile, or that all textiles provide the same ventilation or water resistance.
  • Check the label and usage information to distinguish the protective garment from its accessories. Having a removable knee protector does not by itself certify the abrasion resistance of the fabric around it; assess the garment as a whole and the position of each component.
  • Look for clear information about protection, limitations and maintenance. Use and exposure to sunlight can damage materials: check the garment as recommended by its manufacturer. Garments can combine abrasion resistance, ventilation and waterproofing in different ways: choose the combination suitable for your journey and maintain it according to the instructions, without attributing capabilities that it does not claim.
  • Check the marking and instructions for each product: garments, gloves, boots and protectors certify performance different from the helmet’s approval.

13Joint and back protectors

A helmeted motorcyclist checks an elbow protector while wearing shoulder, hip and knee protectors and a back protector secured with straps, beside a motorcycle parked in a roadside bay.
The key idea

Position your protectors correctly and know which areas and injuries they cover.

ItemWhat you should distinguish
Fabric resistant to slidingResists scraping
Impact protectorAbsorbs impacts
Back protectorReduces force in the back area it covers
Lower-back comfort beltDoes not thereby replace a back protector

Remember

  • Check shoulder, elbow, hip and knee protectors, depending on your garment.
  • Choose a back protector that stays securely in place.
  • Check that protectors stay in place when you bend your joints.
  • Fit each removable protector according to its instructions.
  • Do not confuse comfort padding with impact protection.

Exam trap: Wrong: a back protector prevents every neck injury. Right: check its coverage; it cannot guarantee protection against every spinal injury or necessarily protect your neck.

Read the full explanation
  • It is advisable to cover exposed areas with suitable protectors: shoulders, elbows, hips and knees, depending on the garment. Their purpose is to reduce impacts in the protected area. The fabric's resistance to abrasion and a protector's ability to absorb impacts are different properties.
  • A back protector helps reduce the force transmitted to the part of your back it covers. Choose a size and fastening system that keep it in place while riding and in a fall. Comfort padding is not automatically an impact protector.
  • A back protector cannot guarantee that you will avoid any spinal injury and does not necessarily protect your neck; check the model's coverage and limitations.
  • Check that the protectors stay in place when you bend your joints. If they are removable, use the intended pocket, orientation and compatible garment. A belt intended for lower-back comfort does not replace a protective back protector.

14Protective gloves that preserve feel

A rider wearing a full-face helmet and snug protective gloves fastened at the wrists holds the controls of a lightweight motorcycle while travelling in the right-hand lane of a Mediterranean road.
The key idea

Choose gloves that protect your hands and let you use the controls precisely.

Remember

  • Try fastened gloves while holding the handlebars and using the controls.
  • Check for excess fingertip material or restricted movement.
  • Adjust the wrist fastening.
  • Check palms, seams and fastenings; replace gloves when wear compromises protection.
  • Protect your hands on a scooter too.

Exam trap: Wrong: the thickest gloves are always best. Right: check their protection and your ability to use the controls.

Read the full explanation
  • Protect your hands from abrasion and impacts: if you fall, you may put them on the ground. Depending on their design, gloves also help protect you from cold, wind or rain, and are recommended all year round.
  • Choose motorcycle gloves in a size that lets you hold the handlebars and operate the throttle, brakes, clutch and switches precisely. Try them on fastened and check that the fingers are not too long and that there is no tightness restricting movement.
  • A wrist fastening helps keep them from coming off. Check the palms, seams, fastenings and protective areas, and replace the gloves if wear compromises their function. Choosing the thickest gloves without trying the controls can reduce feel without ensuring adequate protection.
  • You can find textile and leather gloves for different climates. The lining material, whether natural or synthetic, does not by itself determine how effective they are: consider the construction, fit and performance of the complete product.
  • Protective gloves are also recommended in towns. If you ride a 125 cc scooter, also check that you can operate both levers and all the switches without losing your grip, with your fingers correctly placed on each control.

15Gloves and footwear: scope of the requirement

A rider wearing a helmet, protective gloves and closed footwear rides a 125 cc motorcycle to the right within their lane on a road in a Mediterranean setting.
The key idea

You must wear required gloves and footwear; breaking these rules costs you no points.

Remember

  • Until the technical order takes effect, you may use ordinary protective gloves.
  • No traffic approval or certification needed; motorcycle gloves with verified protection are recommended.
  • The required footwear does not need approval or certification either.
  • For enforcement, the instruction accepts at least toe and heel retention.
  • Do not wear flip-flops without adequate retention.

Exam trap: Wrong: you can ignore these rules because no points are deducted. Right: no points are deducted, but you must still wear gloves and closed footwear where required.

Read the full explanation
  • Until the ministerial order setting the technical specifications for gloves comes into force, you may use protective gloves with the same characteristics as those used at present. [RD 518/2026, second transitional provision.a](https://www.boe.es/buscar/doc.php?id=BOE-A-2026-13889)
  • DGT Instruction SANC 2026/25 clarifies that, to meet this requirement, gloves do not need specific traffic approval or certification. Choosing motorcycle gloves with certified protection is still recommended. [DGT, Instruction SANC 2026/25](https://www.dgt.es/export/sites/web-DGT/.galleries/downloads/muevete-con-seguridad/normas-de-trafico/S-sanciones/2026/Instruccion-SANC-2026_25_sobre-utilizacion-de-calzado-cerrado-y-guantes.pdf)
  • Footwear required for riding on the road also does not need approval or certification. For the purposes of applying article 118.1.c, the DGT considers it sufficient for the footwear to have at least some form of fastening for the toes and heel. [DGT, Instruction SANC 2026/25](https://www.dgt.es/export/sites/web-DGT/.galleries/downloads/muevete-con-seguridad/normas-de-trafico/S-sanciones/2026/Instruccion-SANC-2026_25_sobre-utilizacion-de-calzado-cerrado-y-guantes.pdf)
  • Under DGT Instruction SANC 2026/25, failing to meet the glove or footwear requirements does not result in points being deducted; you are still required to use them in the stated circumstances. [DGT, Instruction SANC 2026/25](https://www.dgt.es/export/sites/web-DGT/.galleries/downloads/muevete-con-seguridad/normas-de-trafico/S-sanciones/2026/Instruccion-SANC-2026_25_sobre-utilizacion-de-calzado-cerrado-y-guantes.pdf) The other rules on your points balance are covered in ‘The points-based driving licence’.

16Boots that protect your feet and ankles

A rider seated on a motorcycle immobilized on its centre stand wears securely fastened boots covering both ankles and lower legs.
The key idea

Prefer motorcycle boots that protect your feet without making the controls difficult to use.

FootwearWhat you should remember
Motorcycle bootsProvide protection designed for a fall
Ordinary trainersMay cover your feet but offer less protection
Ordinary bootsDo not assume they provide motorcycle protection

Remember

  • Choose well-fitting motorcycle boots covering your ankles and lower legs.
  • Try them with your motorcycle stationary.
  • Check that you can put your feet down and use gear and brake controls.
  • Check soles, retention and fastenings.
  • Avoid loose laces or ends that could catch.
  • Protect both feet and ankles.

Exam trap: Wrong: covering your feet equals wearing protective boots. Right: minimum footwear does not necessarily provide motorcycle boot protection.

Read the full explanation
  • For better protection, wear purpose-made motorcycle boots that fit well and cover your ankle and lower leg. The minimum footwear requirement for riding on the road is not equivalent to the protection offered by boots designed for a fall.
  • You must be able to place your feet on the ground and operate the gear change and brake precisely. Try the footwear with the motorcycle stationary and check that its stiffness, height, heel or sole tread does not interfere with handling. Protective boots must combine coverage with mobility.
  • Check the fastenings, sole and closures. Avoid loose laces or ends that could catch on the controls, and make sure you have good grip when placing your foot on the ground.
  • Ordinary sports shoes may cover your foot but offer less protection from impacts, twisting or abrasion than motorcycle boots. You should not assume that every everyday boot is suitable for motorcycling either.

17Equipment for heat, cold and rain

A motorcyclist wearing a full-face helmet, gloves, boots and ventilated protective clothing adjusts a jacket vent beside a 125 cc motorcycle parked at the right-hand kerb of a sunny road.
The key idea

Adapt your equipment to the weather while keeping protection and freedom to move.

WeatherHow you should adapt equipment
HeatUse ventilated clothing that keeps protectors in place
Cold or rainChoose insulation and waterproofing without losing movement or feel

Remember

  • Prepare ventilation and adjustments before setting off.
  • Do not remove impact protection when removing a thermal lining.
  • Check that you can fasten your helmet, gloves and clothing properly.
  • Avoid layers that move protectors or leave loose parts.
  • If weather or equipment prevents safe control, stop somewhere suitable.

Exam trap: Wrong: an ordinary waterproof layer adds impact protection by itself. Right: it does not make your equipment more resistant to impacts.

Read the full explanation
  • In hot weather, choose ventilated motorcycle clothing that keeps the protectors in place. You can wear summer gloves and breathable boots suited to the conditions.
  • Removable linings and ventilation openings let you adapt some garments to the temperature. Follow their instructions and check that removing a thermal lining does not also remove an impact protector. Make adjustments before setting off.
  • In cold or rainy weather, look for insulation and waterproofing without adding so much bulk that you lose mobility or feel. You must still be able to fasten your helmet, gloves and clothing properly. An ordinary waterproof garment worn over your equipment does not by itself make it more impact-resistant.
  • Check that extra layers do not displace the protectors or leave loose parts. If wet equipment, heat or cold prevent you from operating the controls safely, stop in a suitable place to deal with the problem.

18Airbags: protection, preparation and care

A motorcyclist wearing a helmet, gloves, boots and protective clothing checks the indicator on their electronic airbag vest beside a 125 cc motorcycle parked at the right-hand edge of the road.
The key idea

Prepare your airbag according to its manual so it can protect the intended areas.

Airbag systemWhat you must check
MechanicalCheck its attachment and connection; follow the manual before getting off.
ElectronicCheck power, status and activation according to its manual

Remember

  • Adding an airbag for torso protection is recommended.
  • Check which areas it covers and its limits.
  • Leave the inflation space specified by the manufacturer.
  • Check compatibility with your jacket and protectors.
  • After deployment or damage, follow the required inspection procedure before reuse.

Exam trap: Wrong: every airbag needs a tether, or wearing it means it is ready. Right: identify your system and prepare it according to its instructions.

Read the full explanation
  • You can add an airbag vest or jacket to provide passive protection for your torso. When inflated, the bag absorbs impacts in the areas specified for the model; check its coverage and limitations.
  • Choose a size and fit compatible with your jacket and protectors, allowing the space needed for inflation. It is recommended for riding on your A1 and complements your helmet, gloves, boots and protective clothing. [DGT, technical guide to airbags](https://www.dgt.es/export/sites/web-DGT/.galleries/downloads/nota_prensa/2025/20251219-impulso-airbag-para-motoristas/251216-ANESDOR-GuiaAirbag.pdf)
  • Find out how the model you use is activated. Some systems are mechanically activated by a connection to the motorcycle, while others use electronic detection. Learn the specific procedure before riding; not all systems need a cable or work with the same preparation.
  • For a mechanical system, check the anchor point and connection in accordance with the manufacturer's instructions. Before getting off the motorcycle, follow its disconnection procedure. Do not improvise a different attachment point or a connection length other than the one specified.
  • For an electronic system, check its power supply, condition and activation in accordance with its manual. You must know its operating instructions and not set off assuming it is ready just because you are wearing it. Also check the garment's fit and fastenings.
  • After deployment or damage, follow the manufacturer's inspection and restoration procedure before using it again. There is no universal recharging procedure for every airbag: specific operations and components may be required.

19Colours and high-visibility features

A motorcyclist wearing a bright green helmet and a high-visibility jacket with reflective bands rides a 125 cc motorcycle with its headlight on in the right-hand lane of a Mediterranean road.
The key idea

Use suitable colours and materials to help others see you, without assuming everyone has.

MaterialHow it helps others see you
FluorescentStands out in ambient light
RetroreflectiveReturns light towards its source

Remember

  • Light or brightly coloured helmets and clothing are recommended.
  • Keep features that help you stand out clean and visible.
  • Check that other clothing does not cover reflective areas.
  • Secure clothing so it does not interfere with the controls.
  • Use the required lights even with visible clothing.

Exam trap: Wrong: visible clothing replaces lights. Right: it complements required lighting and cannot guarantee others have seen you.

Read the full explanation
  • You are advised to choose a helmet and riding gear in light or bright colours to make it easier for others to see you. Your size and the motorcyclist's exposure make this especially useful. You should also consider how visibility changes with the surroundings and lighting.
  • Fluorescent and retroreflective materials serve different purposes: the former stand out in ambient light, while the latter return light towards its source, such as headlight beams. Neither can guarantee that every driver has seen you.
  • Keep the items intended to make you stand out clean and visible. An outer layer can cover the reflective areas of another garment, so check the outfit you are actually wearing. Choose items that fit securely and do not flap or interfere with the controls.
  • Visible riding gear supplements the required lighting; its use is covered in the “Motorcycle lights and signals” module, and preventing blind spots in the “Risks and prevention on a motorbike” module.

20Reflective vest: carrying and wearing it

A motorcyclist wearing a helmet and a high-visibility reflective vest stands beside an orange 125 cc motorcycle parked on the right-hand shoulder of an interurban road.
The key idea

Know when to carry your reflective vest and when to wear it.

Vehicle and situationWhat you must do
Motorcycle: equipment carriedCarry a reflective vest
Motor tricycleThe stated requirement to carry a vest does not include motor tricycles.
You get off your motorcycle onto an interurban carriageway or hard shoulderWear your vest
You ride a motorcycle as part of your professional activityWear your vest on every road, including urban roads

Remember

  • Carry a reflective vest meeting the required standards on your motorcycle.
  • Keep it within easy reach.
  • Check its size, fastening and condition.
  • Do not hide it under other clothing when you must wear it.
  • Your reflective vest makes you visible; your airbag cushions impacts.

Exam trap: Wrong: you only need your vest after a breakdown when riding for work. Right: if riding as part of your professional activity, wear it on every road.

Read the full explanation
  • You must carry on your motorcycle a high-visibility reflective vest that meets the requirements for personal protective equipment; keep it accessible. This compulsory item applies to motorcycles: paragraph 3 does not include A1 motor tricycles, and three-wheeled vehicles are excluded from paragraph 1. [RGV, annex XII.1 and 3](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anxii)
  • You must put it on when you get off the motorcycle and are on the carriageway or arcén (hard shoulder) of a road outside a built-up area. [RGC, art. 118.4](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a118)
  • If you ride a motorcycle as part of your work, you must wear a high-visibility reflective vest on every road. This requirement also applies in built-up areas and does not depend on a breakdown occurring. [RGC, art. 118.4](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a118)
  • Check the vest's size, fastening and material condition, and avoid covering it with another garment when you are required to wear it. Distinguish it from an airbag vest: one makes you visible and the other is designed to cushion impacts; a combined product must serve both purposes.

21The passenger also needs their own equipment

A rider and his passenger travel on a motorcycle wearing individually fitted, fastened full-face helmets, jackets, trousers, gloves and boots, with their feet on their respective footrests.
The key idea

Prepare correctly sized passenger equipment, fitted properly and suitable for the journey.

Remember

  • Prepare a helmet in the right size and shape for your passenger.
  • Check that their glasses stay stable and comfortable, if they wear them.
  • Recommend a jacket, trousers, boots and protectors in their size.
  • Avoid loose clothing ends near moving parts.
  • For a child, choose equipment that fits their body.
  • Follow passenger age, seating and position rules too.

Exam trap: Wrong: you can fix an oversized helmet with improvised padding. Right: your passenger needs a correctly sized helmet.

Read the full explanation
  • Prepare a set of personal riding gear for your passenger. Have them try it on in advance: their head may need a different helmet size or shape from yours, even if your head circumferences are similar. Also check that their glasses, if they wear them, stay secure and comfortable.
  • Also recommend a jacket, trousers, boots and protectors that fit them. Their clothing must allow them to maintain their riding posture and use the intended footrests, without loose ends that could come near moving parts. A garment that is too large can cause the protectors to shift.
  • If the passenger is a child, you still need equipment that fits their body. Do not make a loose helmet fit by adding improvised padding. The ages, authorised seats and passenger position are covered in the “Passengers and loads on motorcycles” module; having good equipment does not replace those requirements.

22Equipment for A1 practical tests

An examiner checks the protectors of a candidate wearing a helmet, gloves, protective motorcycle jacket and trousers, and ankle-covering boots, beside a parked lightweight motorcycle.
The key idea

Attend practical tests wearing all the required motorcycle equipment, correctly fitted.

Motorcycle training or test situationWhat you must wear
Practical testsHelmet, gloves, motorcycle jacket and trousers with protectors, and suitable boots
Training and tests on public roadsAlso an approved reflective vest with V-14 stamped or printed, visible from behind

Remember

  • Wear an approved helmet and gloves.
  • Wear a jacket and trousers made for motorcycle riding.
  • Your jacket must protect back, shoulders and elbows; your trousers must protect knees.
  • Wear leather or similar synthetic boots that adequately protect your ankles.
  • Try all equipment beforehand; check fastenings and movement.
  • With inadequate equipment, tests cannot start or continue; you do not lose an attempt.

Exam trap: Wrong: a helmet and footwear are enough for your test. Right: wear all required equipment with its protectors correctly positioned.

Read the full explanation
  • For A1 practical tests, you must have an approved helmet and gloves. You must also wear a jacket and trousers designed and made for motorcycle riding, with their corresponding protectors. [RGCond, annex VI.C.1](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#anvi) During training and the test on open roads, you must wear an approved reflective vest with the V-14 sign stamped or printed on it and visible from behind; see “Equipment required for practical tests” in the “A1 licence and motorcycle documents” module. [RGCond, annex VI.C.6 and 7.5](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#anvi)
  • The minimum protection is for the back, shoulders and elbows in the jacket, and the knees in the trousers. You must also wear leather or similar synthetic boots that adequately protect the ankle. [RGCond, annex VI.C.1](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#anvi)
  • The examiner may check your equipment, and the tests do not start or are interrupted if you lack adequate protection. [RGCond, art. 57.2 and annex VI.C.1](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#a57) In this case, where you lack adequate equipment, the test not starting or being interrupted does not mean you lose that test attempt. [RGCond, art. 57.2](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#a57)
  • Try on your complete riding gear before attending the practical test, check your mobility and fastenings, and resolve any incompatibilities in advance. Suitable equipment must allow you to perform the movements and keep the protective areas in place.

Choosing and adjusting your helmet

Check approval, fit and fastening before use.

  1. Check for UNECE R22 approval and consult the model instructions.
  2. Try it on in the correct position, wearing the glasses you use for riding.
  3. Make sure it fits securely without painful pressure or restricting your vision.
  4. Fasten and adjust the strap; check that the helmet cannot come off easily.
  5. Check the visor, ventilation, buckle and general condition before setting off.

Preparing equipment for both occupants

Meet the requirements and check all protective equipment.

  1. Identify the type of road and check the helmet, footwear and any required gloves.
  2. Put on your jacket, trousers and boots, and check that the protectors are in place.
  3. If you use an airbag, prepare it according to the instructions.
  4. Separately check the passenger’s fit, fastenings and eye protection.
  5. If you are preparing a motorcycle, check that you carry the reflective vest; use the vest required for professional work where applicable.

Checking equipment after an impact

Do not rely on appearance alone.

  1. Stop using a helmet that has suffered a significant impact.
  2. Replace it and consult the manufacturer if you are unsure about impacts or damage.
  3. Check the seams, fastenings, fabric and protectors on your other clothing.
  4. If the airbag has deployed, follow the inspection procedure for that model.
  5. Use equipment again only when it is intact and correctly prepared and adjusted.

Check what you know

Real questions from the bank on this topic. Pick an answer to see the explanation.

1For the helmet to fulfil its function of protecting the rider, it must...
2Which item of rider equipment is specifically designed to reduce impact force on the area of the back it covers?
3Can a motorcyclist be dazzled by the headlights of an oncoming vehicle?
4You ride a motorcycle whose ITV technical inspection card certifies that it has a self-protection structure and is equipped with a seat belt. Which of the following safety items must you use?

Finished this module?

Mark it as read and you will see your progress on the theory list.

Next module