Theory · C1 Licence - Light Truck · Module 12 of 18

Dangerous goods: ADR basics

You learn the basics of dangerous goods: classes, labels, plates, documentation, authorisations, tunnels and how to respond to incidents with your C1 lorry. The ADR course and tests are separate from preparation for the C1 licence.

35 min read25 sectionsReviewed Nov 3, 2026
A light truck with an orange rear panel and a flame pictogram travels to the right along a Mediterranean road.
Transporting dangerous goods

1What ADR regulates

A light truck travels along a road between villages carrying three drums secured with straps and bearing red diamond labels with a black flame.
The key idea

You must follow ADR rules for journeys within Spain too.

AnnexWhat it regulates
AGoods, packaging, marks, documents and operations
BCrew, equipment and vehicles

Remember

  • Check the rules for your goods and how you carry them.
  • You can also carry dangerous goods in cylinders, drums or packages.
  • The ADR course has its own training and tests.

Exam trap: Wrong: ADR only applies across borders. Right: it can also apply within Spain.

Read the full explanation
  • ADR is the Agreement concerning the International Carriage of Dangerous Goods by Road. Its conditions also apply to transport carried out entirely within Spain, with the national provisions of Real Decreto 97/2014 (Royal Decree 97/2014). A delivery between two Spanish towns may be subject to these rules even if you do not cross a border. [RD 97/2014, art. 2](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a2).
  • Dangerous goods are substances or articles whose transport by road is prohibited or authorised only under certain conditions. The danger does not depend on whether you drive a tanker: you may also carry gases in cylinders, products in drums or batteries in packages inside a box-bodied lorry. [RD 97/2014, art. 3](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a3).
  • Annex A regulates classification, packaging, marking, documentation and transport operations. Annex B covers the crew, equipment, use, construction and approval of vehicles. The specific conditions depend on the goods and how you transport them. [ADR 2025, 1.1.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • These are background basics: Annex V.B.2.4.º of the RGCond (General Driver Regulations) does not list ADR as a specific C1/C subject; the ADR course is separate and has its own training and tests. [RGCond, Annex V.B.2.4.º and art. 25](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481).

2Exemptions: check the specific transport operation

A delivery worker consults a sheet beside a parked light truck with an orange rear panel, a fire extinguisher and secured packages bearing red diamonds with black flames.
The key idea

Check which duties an exemption removes and which you must still meet.

Remember

  • Quantity exemptions depend on the category and amount of each substance.
  • Your lorry’s maximum mass does not decide this exemption.
  • For quantity-exempt packages, orange plates and your ADR certificate may not be required.
  • Keep the required documents, training, package safety measures and firefighting equipment.
  • Limited quantities have their own packaging and marking rules.

Exam trap: Wrong: an exemption removes every duty. Right: check exactly which duties still apply.

Read the full explanation
  • You must check whether your consignment is subject to the general rules or qualifies for a specific exemption. ADR provides exemptions based on the nature of the transport, certain quantities and other circumstances. An exemption may affect only certain obligations: you must not automatically interpret it as removing all safety measures. [ADR 2025, 1.1.3](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • The exemption based on quantities carried per transport unit depends on the transport category and the quantity of each substance. The MMA (maximum authorised mass) of a C1 lorry does not determine this exemption: a delivery in a 7,000 kg lorry may require driver authorisation and orange plates depending on the quantity and transport category (1.1.3.6), even if there is spare load capacity. The professional calculation of these exemptions is covered in the ADR course. [ADR 2025, 1.1.3.6](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • When you transport goods in packages under the exemption in subsection 1.1.3.6, orange plates, instructions in writing and the driver’s ADR certificate may not be required. Obligations such as the transport document, the relevant training and the applicable requirements for packages and firefighting remain in force. [ADR 2025, 1.1.3.6.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Limited quantities have their own requirements for inner and outer packaging and marking. Their mark is neither a hazard class label nor an orange plate. You may therefore encounter different markings depending on the applicable rules. [ADR 2025, 3.4](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

3Classes 1, 2 and 3

A light truck travels in the right-hand lane of a road carrying gas cylinders secured with straps and marked with red diamonds containing black flames.
The key idea

Recognise your goods’ class without treating class numbers as a danger scale.

1Explosives
2Gases
3Flammable liquids
Class or labelWhat you recognise
1Explosive substances and articles
2.1Flammable gases
2.2Non-flammable, non-toxic gases
2.3Toxic gases
3Flammable liquids

Remember

  • Identify goods from documents, rather than smell or colour.
  • A gas can have several hazards.
  • Do not assume a higher class number means greater danger.

Exam trap: Wrong: higher classes are always more dangerous. Right: the number identifies a family of goods.

Read the full explanation
  • Class 1 covers explosive substances and articles. The risks include explosion and, depending on the division, flying fragments or fire. [ADR 2025, 2.1.1.1 and 2.2.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Class 2 covers gases. You may encounter flammable gases, non-flammable, non-toxic gases, and toxic gases, identified by label models 2.1, 2.2 and 2.3. [ADR 2025, 2.2.2 and 5.2.2.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Class 3 covers flammable liquids. You must anticipate that their vapours can cause a fire if they encounter an ignition source. Petrol and diesel are common examples in road transport, but you must use the identification in the documents for the specific goods rather than judging them by smell or colour. [ADR 2025, 2.2.3 and Table A](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • The class and the specific hazard give you different information: a gas may be flammable, toxic or present other additional risks. A class number identifies a regulatory group; it is not a universal scale on which a higher number means greater danger. [ADR 2025, 2.1 and 5.2.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

4Classes 4.1, 4.2 and 4.3

A driver consults a leaflet beside a specialist and a light truck stopped at the right edge of the road, with flame pictograms on blue backgrounds on the cargo box and a closed container.
The key idea

Distinguish flammable substances by their reactions and labels.

4.1Flammable solids and other materials
4.2Spontaneous combustion
4.3Flammable gases with water
ClassHazardLabel
4.1Flammable solids, self-reactive substances, polymerising substances and solid desensitised explosivesRed and white vertical stripes
4.2Spontaneous combustionWhite above, red below
4.3Releases flammable gases on contact with waterBlue background

Remember

  • Check the bottom number as well as the flame.
  • Do not open or handle containers on your own initiative.
  • Follow the written instructions and leave emergency action to specialists.

Exam trap: Wrong: use water whenever you see flames. Right: class 4.3 releases flammable gases with water.

Read the full explanation
  • Class 4.1 includes flammable solids, self-reactive substances, polymerising substances and solid desensitised explosives. Friction, heat or the substance’s own reaction can create risks that you cannot address by treating every package as ordinary cargo. [ADR 2025, 2.2.41](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Class 4.2 includes substances liable to spontaneous combustion. You must associate it with pyrophoric substances and substances liable to self-heating. You do not need to see an external flame for danger to exist: opening or handling the container on your own initiative can alter the product’s safety conditions. [ADR 2025, 2.2.42](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Class 4.3 identifies substances which, in contact with water, emit flammable gases. When you see this indication, follow the instructions in writing and leave the decision on the means of intervention to the specialist services. [ADR 2025, 2.2.43 and 5.4.3](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • To recognise the labels, associate 4.1 with vertical red and white stripes, 4.2 with a white upper half and a red lower half, and 4.3 with a blue background; all three include a flame. You must also check the number at the bottom, because the flame symbol appears on other groups of goods. [ADR 2025, 5.2.2.2.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

5Classes 5 and 6

A light truck facing right is parked beside the near kerb and displays four hazard pictograms: oxidizing substance, organic peroxide, toxic substance and infectious substance.
The key idea

Recognise hazards involving stronger fires, decomposition, poisoning and infection.

5.1Oxidising substances
5.2Organic peroxides
6.1Toxic substances
6.2Infectious substances
ClassHazardLabel
5.1Starts or strengthens burningFlame over a circle; yellow
5.2Dangerous decompositionFlame; red above, yellow below
6.1PoisoningSkull and crossbones; white
6.2InfectionBiohazard symbol

Remember

  • Avoid breathing in, swallowing or touching toxic substances.
  • Do not approach a leak to smell it.
  • Follow each product’s temperature and container requirements.

Exam trap: Wrong: poisoning and infection are the same hazard. Right: they have different hazards and labels.

Read the full explanation
  • Class 5.1 covers oxidising substances. They can support or intensify the combustion of other substances; you must not confuse them with Class 3 flammable liquids. You can recognise their label by a flame over a circle, a yellow background and the number 5.1. The danger exists even if the product is not an ordinary fuel. [ADR 2025, 2.2.51 and 5.2.2.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Class 5.2 includes organic peroxides, which can undergo dangerous decomposition. Their label has a red upper half and a yellow lower half, with a flame and the number 5.2. You must observe the transport conditions specified for each product without improvising changes to the temperature or packaging. [ADR 2025, 2.2.52 and 5.2.2.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Class 6.1 covers toxic substances: you must avoid inhaling or swallowing them and any dangerous contact. The characteristic label shows a skull and crossbones on a white background. You must not approach a leak to smell it or consider a product safe because you cannot detect a smell from where you are. [ADR 2025, 2.2.61 and 5.2.2.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Class 6.2 covers infectious substances and uses the biohazard symbol. Infection and chemical toxicity are different hazards: both require protection, but they do not use the same label. [ADR 2025, 2.2.62, 5.2.2.2 and 8.3.3](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

6Classes 7, 8 and 9

A light truck parked beside the kerb carries a package secured with straps displaying the radiation symbol inside a white diamond-shaped label.
The key idea

Recognise radioactive, corrosive and miscellaneous dangerous goods.

7Radioactive material
8Corrosive substances
9Miscellaneous hazards
ClassWhat you recognise
7Radioactivity symbol
8Liquid attacking a hand and metal; black lower half
9Black vertical stripes above; specific labels for certain batteries

Remember

  • Do not judge danger by how a package looks.
  • Do not touch corrosive spills or try to neutralise them.
  • Do not treat class 9 goods as harmless.

Exam trap: Wrong: class 9 means little danger. Right: it means miscellaneous hazards, not lower danger.

Read the full explanation
  • Class 7 covers radioactive material. The radioactivity symbol identifies this hazard; you must pay attention to its specific labels without judging the risk by the package’s external appearance. [ADR 2025, 2.2.7, 5.2.2.2 and 8.2.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Class 8 covers corrosive substances. Its label shows a liquid attacking a hand and a metal, with a black lower half and the number 8. You must associate it with possible injuries and damage to materials, and avoid touching the spill or trying to neutralise it with another substance. [ADR 2025, 2.2.8 and 5.2.2.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Class 9 brings together miscellaneous dangerous substances and articles presenting hazards covered by this class. It does not mean harmless cargo or a residual category with a lower risk. Its label has vertical black stripes in the upper part; you may encounter specific models for certain batteries, depending on the transport operation. [ADR 2025, 2.2.9 and 5.2.2.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • The complete list of classes is: 1, 2, 3, 4.1, 4.2, 4.3, 5.1, 5.2, 6.1, 6.2, 7, 8 and 9. The subdivisions explain why thirteen classes appear in this list. [ADR 2025, 2.1.1.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

7Labels, placards and other marks

A light truck parked beside the kerb on its right displays two secured packages bearing environmental hazard marks and an orange panel at the rear.
The key idea

Read each label, placard and mark according to its purpose.

MarkingWhere or why
LabelPackage hazards
PlacardVehicles, tanks or containers where required
Other marksEnvironment, package orientation or limited quantities

Remember

  • Check each label’s symbol, colour and bottom number.
  • Goods can carry labels for several hazards.
  • Package labels alone do not tell you which outside placards are needed.
  • The tree and fish mark warns of environmental danger.

Exam trap: Wrong: orange plates replace labels. Right: each type of marking has its own purpose.

Read the full explanation
  • Labels are attached to packages; placards are used on vehicles, tanks or containers where required. Labels identify the hazards of the package; placards make those hazards visible on the means of transport. The orange plate serves a different purpose and does not replace either. [ADR 2025, 5.2.2 and 5.3.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Hazard labels are square and set on a corner. You must interpret the symbol, colour and number at the bottom together. The same goods may need a primary hazard label and subsidiary hazard labels: memorising only the most striking colour can lead you to overlook an additional toxic, corrosive or oxidising hazard. [ADR 2025, 5.2.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • ADR distinguishes between carriage in packages, in tanks, in bulk and in containers, and includes specific rules for explosives and radioactive materials. On a lorry carrying packages of ordinary ADR goods, you cannot determine which external placards are required simply from the presence of labels inside. [ADR 2025, 5.3.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • The environmentally hazardous substance mark, showing a tree and a fish, differs from a numbered class label. You may also encounter package orientation marks or limited quantity marks. You must observe each mark according to its purpose and must not use any one of these marks alone to identify the full hazard. [ADR 2025, 5.2.1 and 3.4](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

8Orange plates: when and where to display them

Two light trucks travel in opposite directions in their own lanes, with clearly visible blank orange panels on the front of the approaching truck and the rear of the departing truck.
The key idea

Display orange plates according to your transport operation.

40 cmStandard plate width
30 cmStandard plate height
15 mmBlack border

Remember

  • When orange plates are required, display them clearly at the front and rear.
  • Keep the plates vertical.
  • A plate without numbers can be correct.
  • Check whether your tank or bulk operation needs side plates.
  • Use smaller plates only when vehicle size and construction prevent standard plates.

Exam trap: Wrong: every plate needs numbers. Right: some transport operations allow plain plates.

Read the full explanation
  • When your transport operation requires orange plates, you must display the regulatory plates clearly: one at the front and one at the rear of the transport unit, in a vertical plane. These plates warn other road users and help guide the emergency services. [ADR 2025, 5.3.2.1.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • The standard orange plate is reflectorised, 40 cm across the base and 30 cm high, with a black border of 15 mm. When the size and construction of the vehicle leave insufficient space, you may use a reduced plate measuring at least 30 cm across the base and 12 cm high, with a 10 mm black border. [ADR 2025, 5.3.2.2.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • You may encounter plates without numbers on transport operations where the plates do not need to identify a specific substance, such as certain operations involving packages. A blank plate remains a valid ADR marking where applicable. [ADR 2025, 5.3.2.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Tanks and certain bulk transport operations may require numbered plates on the sides, identifying the substance or compartment. If the conditions for carrying a single substance are met, numbered front and rear plates may allow you to dispense with the side plates specified in those provisions. Placement depends on the actual configuration. [ADR 2025, 5.3.2.1.2 to 5.3.2.1.6](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

9How to read a numbered plate

A light truck travels in the right lane of a road with an orange panel on its rear divided horizontally into two empty fields.
The key idea

Read the hazard at the top and the goods’ identity at the bottom.

33Highly flammable liquid
Plate partWhat you read
TopHazard identification number
BottomGoods’ UN number
X before hazard numberDangerous reaction with water

Remember

  • The UN number has four digits.
  • A repeated digit makes the corresponding hazard stronger.
  • When one digit is enough, a zero is added.
  • Do not guess the meaning of special combinations.
  • Report the X too, if shown.

Exam trap: Wrong: X means use water. Right: it warns of a dangerous water reaction; use water only with expert approval.

Read the full explanation
  • On a numbered plate, you read the hazard identification number at the top and the UN number of the goods at the bottom. The UN number has four digits; it does not indicate the quantity carried or the vehicle's MMA (maximum authorised mass). You can relay both lines to the emergency services without trying to interpret them from memory. [ADR 2025, 5.3.2.2.3](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • For classes 2 to 9, the hazard identification number consists of two or three digits, preceded by an X where applicable. This identifier differs from the class number on a label. For class 1, the classification code serves the prescribed hazard identification function on these plates. [ADR 2025, 5.3.2.3.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Repeating a digit indicates an intensification of the corresponding hazard; when one digit is sufficient to indicate the hazard, a zero is added. For example, 33 identifies a highly flammable liquid. Some combinations have special meanings: you must not interpret every sequence of digits by intuitively adding hazards together. [ADR 2025, 5.3.2.3.1 and 5.3.2.3.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • The letter X before the hazard identification number indicates that the substance reacts dangerously with water. You must use water only with expert approval. When reporting the plate, you must also mention the X: omitting it can conceal a crucial detail for choosing the response and protecting anyone approaching. [ADR 2025, 5.3.2.3.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

10Empty vehicles and dangerous residues

A light tanker truck travels on the right with a red diamond bearing a black flame and an orange panel, while a cutaway of the tank shows liquid residues and vapours inside.
The key idea

Keep required markings while dangerous residues remain.

ConditionWhat you do with plates
Tank not cleaned, degassed or decontaminatedKeep required markings
No relevant dangerous goods or residuesRemove or fully cover plates as ADR requires

Remember

  • An empty tank can still contain dangerous vapours and residues.
  • Without the required cleaning, the tank counts as carrying its last load.
  • Carry documents matching its condition, including an empty-journey transport document where required.
  • Empty, uncleaned bulk vehicles and containers also have duties.

Exam trap: Wrong: remove plates after unloading. Right: keep them if dangerous residues mean they are still required.

Read the full explanation
  • You must retain the required markings on an empty tank that has not been cleaned, degassed or decontaminated. Obligations also apply to empty, uncleaned bulk vehicles and containers. Delivering the goods does not prove that the danger from residues or vapours has been eliminated. [ADR 2025, 5.3.2.1.7](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • After a tank is unloaded, if the prescribed cleaning has not been carried out, the vehicle is treated as though it carries the last goods loaded. You must carry documentation adapted to this situation, including the carta de porte (transport document) for the empty journey where applicable. The unloading company must adapt the documents to the state of the transport operation. [RD 97/2014, art. 46](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a46).
  • You must remove or cover plates that do not relate to the dangerous goods carried or their residues. The covering must be complete and meet ADR requirements. [ADR 2025, 5.3.2.1.8](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

11When you need ADR authorisation

The driver of a stopped light truck with an orange plate hands two documents to a traffic officer through the left cab window.
The key idea

You need ADR authorisation when your operation requires it, even in light vehicles.

one yearMinimum time holding B licence
DocumentWhat it proves
ADR authorisationYour training
ADR vehicle approvalVehicle compliance where required

Remember

  • Check exemptions before deciding whether you need authorisation.
  • Carry your valid ordinary licence and required special authorisation.
  • Show them when officers ask.
  • To obtain authorisation, hold a valid B licence for at least one year.
  • Complete the course, pass the tests and meet the other requirements.

Exam trap: Wrong: your C1 licence includes ADR. Right: ADR authorisation supplements your licence without allowing extra vehicle categories.

Read the full explanation
  • You must obtain the ADR driver training certificate to drive vehicles carrying dangerous goods, regardless of their mass, unless the operation falls under an applicable exemption in section 1.1.3. This requirement may also apply to vehicles of up to 3,500 kg: mass alone does not exempt you from certified training. [ADR 2025, 8.2.1.1 and 1.1.3](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • You must carry your special ADR authorisation together with the valid ordinary driving licence for the vehicle, and produce both when requested by the authorities or their officers. To drive your lorry, you need the appropriate C1 licence: ADR authorisation certifies your special entitlement to carry the goods. [RGCond, art. 25.2](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#a25).
  • To obtain ADR authorisation, you must hold at least a valid category B licence that you have held for at least one year; successfully complete the basic initial training course at a DGT-authorised centre; and be declared fit by the Jefatura Provincial de Tráfico (Provincial Traffic Office) in the relevant tests. You must also meet the group 2 physical and psychological fitness requirements and have your normal residence in Spain. You must not be disqualified by a court from driving motor vehicles and mopeds, or have your licence suspended or impounded by an administrative authority. [RGCond, art. 26.a-f](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#a26).
  • ADR authorisation certifies your training; ADR approval certifies that the vehicle meets the required conditions where such approval is required. You can read about the role of CAP (Certificate of Professional Competence) in «C1 lorry licences and types of transport». [ADR 2025, 8.1.2.2 and 9.1.3](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

12Basic authorisation, specialisations and validity

A driver wearing a reflective vest checks an authorization card beside a light box truck parked with the kerb on its right.
The key idea

Check your ADR authorisation’s scope and validity before driving.

five yearsValidity and each renewal
twelve monthsPeriod before expiry
AuthorisationScope
BasicAuthorised non-tank operations; excludes those needing explosives or radioactive material specialisation
SpecialisationsTanks, explosives and radioactive material, as authorised

Remember

  • Basic authorisation does not cover every operation.
  • Extra specialisations require their training and tests.
  • To renew, complete an accepted course and pass the required tests.
  • Specialisations also require their own training.
  • Adding a specialisation keeps your existing expiry date.

Exam trap: Wrong: early renewal always starts from expiry. Right: only if you complete the course and pass tests within twelve months before expiry; earlier renewal starts when you pass.

Read the full explanation
  • With basic ADR authorisation, you may carry out transport operations within its scope in vehicles other than tank vehicles, except those requiring specialisation in explosives or radioactive materials. You must check the authorised classes and forms of carriage before accepting a job. [RGCond, art. 25 and Annex V.C.1](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481).
  • To extend your authorisation to tanks, explosives or radioactive materials, you must complete the specific training for the relevant specialisation and meet the required test standard. The precise scope of each specialisation is covered in the separate ADR course. [RGCond, art. 29](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#a29).
  • Your special authorisation is valid for five years, and you can renew it for five-year periods. You must successfully complete a refresher course or, if you prefer, an initial training course, and meet the test standard; to renew specialisations, you must also complete their corresponding training. You must meet the requirements concerning disqualification and licence suspension or administrative impoundment. [RGCond, art. 28, paragraphs 1, 2 and 3](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#a28).
  • If you complete the course and meet the renewal test standard within the twelve months before expiry, the new period of validity runs from that expiry date. If you complete both requirements more than twelve months in advance, it runs from the date you meet the test standard. [RGCond, art. 28.4](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#a28). If you add new specialisations to a valid authorisation, you retain its expiry date. [RGCond, art. 29.2](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#a29).

13Specific documents on board

A worker hands documents to the driver beside the open right door of a light truck, with a folder and photo identification on the passenger seat and the steering wheel farther inside, on the left side of the cab.
The key idea

Carry every document required for your operation in the cab.

Remember

  • Check that your documents cover all your dangerous goods.
  • Carry written instructions and each crew member’s photo identification when required.
  • Carry the certificates and approvals required for your operation.
  • Receive the transport document before starting the journey.

Exam trap: Wrong: every package-carrying lorry needs ADR vehicle approval. Right: this depends on the applicable rules.

Read the full explanation
  • In addition to the usual documentation, you must carry in the cab the transport documents covering all the dangerous goods, the instructions in writing and photographic identification for each crew member, whenever these requirements apply. [ADR 2025, 8.1.2.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • When ADR requires them, you must also carry the driver training certificate, the vehicle certificate of approval and copies of the competent authority approvals required for certain transport operations. Not every lorry carrying packages needs an ADR vehicle certificate of approval: you must check which regulatory provisions apply. [ADR 2025, 8.1.2.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • The consignor or, if expressly delegated, the loader must give you the transport document before transport begins. General professional documentation is covered in «Professional transport documentation». [RD 97/2014, art. 35.1](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a35).

14What the transport document identifies

Hands point to the empty fields of a transport document with a flame pictogram and two address blocks, beside a light truck and packages in a loading area.
The key idea

Use the transport document to identify your goods and plan your route.

Remember

  • Look for UN, the UN number and the proper shipping name.
  • Do not rely only on the trade name.
  • Check class, labels, quantities, packages and packing group where applicable.
  • Check the sender’s and receiver’s names and addresses.
  • For restricted tunnels, check the restriction code or required entry.
  • You can use electronic documents with the required safeguards.

Exam trap: Wrong: electronic documents remove the need for written instructions. Right: keep instructions in the required form.

Read the full explanation
  • You must locate the UN number preceded by UN and the proper shipping name. The trade name alone may be insufficient. These details allow you to identify what you are carrying without relying on a container remaining visible or on remembering the name the customer used when booking the service. [ADR 2025, 5.4.1.1.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • The transport document contains the required class or label details, the packing group where assigned, quantities and packages. Packing groups I, II and III, where they exist, indicate degrees of danger within their classification; they do not replace the UN number or the class. [ADR 2025, 2.1.1.3 and 5.4.1.1.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • The document must include the name and address of the consignor and the consignee. If the journey includes tunnels with restrictions for dangerous goods, it must include the tunnel restriction code or the appropriate regulatory entry. You must check this when planning your route. [ADR 2025, 5.4.1.1.1 g), h) and k)](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • ADR allows electronic documentation with equivalent guarantees of availability and evidential value to those required. The option to use electronic documentation does not remove the specific obligation to have the instructions in writing in the prescribed form. [ADR 2025, 5.4.0 and 5.4.3](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

15Instructions in writing for the crew

A driver seated in the left driving position of a parked light truck consults four pages with ADR and protective equipment pictograms, with another document within reach in the cab.
The key idea

Carry required written instructions in a language you understand.

four pagesWritten instructions model

Remember

  • Read them before setting off and relate them to your load.
  • Keep them within reach in the cab.
  • If you cannot understand them, request understandable instructions before leaving.
  • Ask for explanations of your goods’ hazards.
  • Provide documents during emergencies only when safe.

Exam trap: Wrong: carrying instructions you cannot understand is enough. Right: you must understand and apply them.

Read the full explanation
  • You must carry the official model of instructions in writing whenever required. The carrier must provide it on board in a language the crew members understand and ensure that they can apply it. If you do not understand the instructions, request a copy in a language you understand before setting off. [RD 97/2014, art. 35](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a35).
  • The instructions in writing follow a four-page model covering general measures, hazards by label and protective equipment. You must consult them before setting off and relate them to the goods you carry. [ADR 2025, 5.4.3](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • You must keep them within reach in the cab and know where the transport documents are. In an emergency, the transport document identifies the substances and the instructions guide the initial measures. Both are useful only if you can find them and make them available without exposing yourself to the affected load. [ADR 2025, 5.4.3 and 8.1.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • You must know what applies to the labels on your load and ask the consignor, loader or intermediary for any clarification you need. The company must ensure that you are informed, but you must also familiarise yourself with the particular characteristics of the substance. [RD 97/2014, art. 35](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a35).

16Prohibitions during transport

A worker moves a closed drum on a hand trolley beside a light truck parked at the kerb, with a no-smoking pictogram on its side.
The key idea

Avoid non-crew passengers, opened packages and spark sources during transport.

Remember

  • Under general ADR rules, do not carry passengers outside the crew.
  • A personal companion does not become crew just by accompanying you.
  • Do not open packages containing dangerous goods.
  • If you suspect a leak, report it and follow the safety procedure.
  • During handling, do not smoke inside or near the vehicle.
  • Use portable lighting without metal surfaces capable of producing sparks.

Exam trap: Wrong: you can vape during handling. Right: the smoking ban includes electronic cigarettes.

Read the full explanation
  • Under the general rules, you must not carry passengers who are not crew members in transport units containing dangerous goods. Someone accompanying you for personal reasons is a passenger who is not a crew member; the crew comprises those who perform safety, security, training or operational duties during transport. [ADR 2025, 1.2.1 and 8.3.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • As a driver or accompanying crew member, you must not open packages containing dangerous goods. If you suspect an irregularity or a leak, you must report it and follow the safety procedure without exposing yourself. [ADR 2025, 8.3.3](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • You must not smoke inside or near vehicles during handling operations. The prohibition includes electronic cigarettes and similar devices. [ADR 2025, 8.3.5 and 5.4.3](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • The portable lighting equipment you use must not have metal surfaces capable of producing sparks. You must use equipment suitable for the transport operation and its conditions of use. Preventing ignition forms part of choosing the equipment. [ADR 2025, 8.3.4](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

17Specific loading and unloading precautions

A light truck immobilized with wheel chocks unloads drums of dangerous goods under the supervision of staff wearing protective equipment in an area cordoned off with cones and tape.
The key idea

Keep the unit immobilised and continuously supervised during loading and unloading.

Remember

  • Show required certificates if the loader asks.
  • Do not start loading if applicable requirements are unmet.
  • Keep uninvolved people away and follow protection measures.
  • When parking, apply the brake and follow immobilisation requirements.
  • Before moving a tanker, check filling, discharge and safety components.
  • Check mixed-load bans; tell the next loader what is already loaded.

Exam trap: Wrong: you can always leave the engine running. Right: stop it during loading and unloading, except where regulatory exceptions for pumps or other mechanisms and applicable rules allow.

Read the full explanation
  • Before loading, you must present the ADR vehicle approval and your training certificate at the loader’s request, whenever required. The loader must check the applicable requirements and must not start loading if you fail to comply with the regulatory provisions on documentation, equipment or preliminary checks. [RD 97/2014, art. 36](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a36).
  • The unit must be immobilised during loading and unloading. These operations must remain under continuous supervision by personnel acting on behalf of the loader or unloader. You must keep people who are not involved in the operation away and follow the instructions on personal protection and the site’s emergency systems. [RD 97/2014, art. 37](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a37).
  • During loading or unloading, you must switch off the engine, subject to the regulatory exceptions relating to the operation of pumps or other mechanisms and to the applicable legislation. You must apply the parking brake when you park the unit and comply with the relevant immobilisation measures. [ADR 2025, 8.3.6 and 8.3.7](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • After completing an operation involving tanks, you must check the filling, emptying and safety components before moving off. The loader or unloader must remove any residues adhering to the outside during the operation. The general procedure for securing loads and distributing mass is covered in «Load securing and safety»; here you must relate it to the risk of leaks and contamination. [RD 97/2014, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a45).
  • You cannot freely combine different products in the lorry’s load body: you must comply with prohibitions on mixed packing and mixed loading, load limits and ADR conditions. If you collect goods at several locations, the carrier must inform each new loader of the goods already loaded. This precaution also applies to C1 deliveries involving small packages. [RD 97/2014, art. 39](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a39).

18Routes and traffic restrictions

A light lorry with an orange panel travels in its right-hand lane on a bypass road around a town.
The key idea

Plan a permitted route and check its restrictions before leaving.

7,500 kgThreshold for extra restrictions
Vehicles covered by the DGT resolutionRestriction timetable
Required to display orange plates, even at or below 7,500 kgAnnex V: specified days, times and road sections
Over 7,500 kg MMA (maximum authorised mass) or maximum combination massAnnex II restrictions also apply

Remember

  • Follow the routes established for dangerous goods.
  • Use signposted ring roads, choosing the outermost where required.
  • Check whether you must use RIMP and its prescribed connections.
  • For deliveries, minimise conventional roads and choose routes for safety and traffic flow.
  • Match urban access to your delivery point and the applicable rules.
  • Check dates, times, road sections, regional and local restrictions, exemptions and permits.

Exam trap: Wrong: mandatory routes always apply, even with an ADR exemption. Right: with an ADR exemption, they do not apply unless the authority extends them for safety reasons.

Read the full explanation
  • You must use the designated routes for dangerous goods. Where routes following the same course are available on an autopista (motorway), autovía (dual carriageway) or road with separate carriageways for each direction, you must use them, except on sections subject to restrictions. You must always use the bypasses, diversion routes or outer ring roads signposted for these vehicles, choosing the one furthest from the built-up area. [RD 97/2014, art. 5.2](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a5). These route obligations do not apply if you carry out the transport under an ADR exemption, including the exemption in subsection 1.1.3.6, unless the competent authority extends them to such transport operations for safety reasons. [RD 97/2014, art. 5.3](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a5).
  • The RIMP is the Red de Itinerarios para Mercancías Peligrosas (Dangerous Goods Route Network). The 2026 DGT rules designate routes for vehicles required to display orange plates; for journeys other than distribution and delivery, you must use the network if your origin and destination are on it, and access it via the designated connections if they are outside it. This obligation may also apply to your C1 delivery lorry. [DGT Resolution of 14 January 2026, B.2.2](https://www.boe.es/buscar/act.php?id=BOE-A-2026-1255).
  • You must also plan deliveries to final recipients using the route best suited to safety and traffic flow, minimising the distance on conventional roads before delivery and using outer ring roads. Access to the urban area for loading or unloading must comply with the delivery location and the conditions of the applicable rules. [DGT Resolution of 14 January 2026, B.2.2.a](https://www.boe.es/buscar/act.php?id=BOE-A-2026-1255).
  • If you display orange plates, the schedule in Annex V (1.º and 2.º A) applies to you even if you do not exceed 7,500 kg. Within the scope of the 2026 DGT resolution, this rule applies to vehicles required to display those plates and covers the days, times and road sections specified. If your vehicle exceeds 7,500 kg in MMA (maximum authorised mass) or maximum combination mass, the restrictions in Annex II also apply. You must check the exemptions in Annex III and the conditions of any special authorisation. For each journey, you must also check the applicable regional and local restrictions. [DGT Resolution of 14 January 2026, B.2.1 and B.2.3](https://www.boe.es/buscar/act.php?id=BOE-A-2026-1255); [RD 97/2014, art. 5](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a5).

19Signs for dangerous goods

A light truck with an orange dangerous goods panel is stopped beside the right-hand kerb before an R-108 no-entry sign.
The key idea

Follow the entry bans and compulsory carriageways that apply to your goods.

1,000 litresR-110: exceed this amount
Prohibition signGoods carried
R-108Dangerous goods
R-109Explosive or highly flammable goods
R-110More than 1,000 litres of products that can pollute water

Remember

  • Check whether the sign bans entry or requires you to use a carriageway.
  • See “Signs and their hierarchy for C1” for the scope of these signs.
  • Plan your route using “Routes and traffic restrictions”.

Exam trap: Wrong: R-110 applies to any amount of a water-polluting product. Right: it applies when the amount exceeds 1,000 litres.

Read the full explanation
  • You must comply with the no-entry signs for dangerous goods (R-108), explosive or highly flammable goods (R-109) and products capable of polluting water in quantities exceeding 1,000 litres (R-110), as well as the specific mandatory carriageway signs R-414, R-415 and R-416; their scope and interpretation are explained in «Signs and their hierarchy for C1», and route planning in «Routes and traffic restrictions» in this module. [RD 465/2025, Annex I catalogue](https://www.boe.es/buscar/doc.php?id=BOE-A-2025-12199).

20Speed limits for lorries carrying dangerous goods

A light truck with an orange panel and a flammable-goods pictogram travels left on the upper carriageway of a divided motorway, while a passenger car travels right on the opposite carriageway.
The key idea

Check the specific dangerous-goods speed limits for your lorry and the road.

Remember

  • Apply the specific speed limits for your lorry carrying dangerous goods.
  • See “Speed and safe following distances” for the values and how they apply.

Exam trap: Wrong: rely on ordinary lorry speed limits alone. Right: check the specific limits in “Speed and safe following distances”.

Read the full explanation
  • When carrying dangerous goods, you must apply the specific speed limits for lorries carrying these goods according to the road type; the limits and how to apply them are explained in «Speed and safe following distances». [RGC, arts. 48.1.b and 50.4](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514).

21The five tunnel categories

Five tunnels lined up in a hillside display crossed-out explosion, toxic cloud and fire pictograms accumulating from left to right, while a light truck travels in the right lane toward the first tunnel.
The key idea

Check the tunnel category and its operating times before entering.

Tunnel categoryRestrictions under ADR classification
ANo restrictions under this classification
BVery large explosion
CAlso large explosion or large toxic release
DAlso large fire
EMost restrictive; exceptions for “(-)” and specific ADR provisions; affects certain limited quantities

Remember

  • Restrictions increase from A to E.
  • The category can change with the day or time.
  • Your licence does not replace checking the tunnel.

Exam trap: Wrong: E bans every dangerous good without exception. Right: regulatory exceptions and specific provisions apply.

Read the full explanation
  • ADR establishes five tunnel categories: A, B, C, D and E. Category A imposes no restrictions under this classification; category B restricts goods capable of causing a very large explosion. [ADR 2025, 1.9.5.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Category C adds a large explosion or a large release of toxic substances to the risks covered by category B. Category D also includes a large fire. You must understand that restrictions increase as you move through the letters; checking whether the goods can explode is not enough. [ADR 2025, 1.9.5.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Category E is the most restrictive: it restricts dangerous goods except those marked «(-)» and the specific cases provided for in ADR. It also affects certain transport operations involving limited quantities. [ADR 2025, 1.9.5.2 and 8.6](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • The authority assigns the category taking account of the tunnel's characteristics, the risks and alternative routes; it may set different categories for different times or days. You must check the signs and the category applicable when you plan to go through. A transport authorisation or a C1 licence does not replace this prior check. [ADR 2025, 1.9.5.1 and 1.9.5.3](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

22Deciding whether you can go through a tunnel

A light truck with an orange ADR plate and the driver on the left side of the cab is stopped before a tunnel beside a sign prohibiting vehicles carrying dangerous goods.
The key idea

Compare your load’s restriction code with the tunnel category.

Goods codeMode of carriageProhibited tunnels
BSimple code, any modeB, C, D and E
CSimple code, any modeC, D and E
DSimple code, any modeD and E
ESimple code, any modeE
D/ETanks or bulkD and E
D/EOther carriageE

Remember

  • The code belongs to the goods; the category belongs to the tunnel.
  • For mixed loads, apply the most restrictive applicable code.
  • Check the separate rules for exemptions.
  • Certain marked limited-quantity operations face restrictions in E tunnels.
  • Even without an ADR panel, obey closures, traffic lights and other bans.

Exam trap: Wrong: D/E means the same restriction for every operation. Right: tanks and bulk cannot use D or E; other carriage cannot use E.

Read the full explanation
  • You must compare the tunnel category shown on the signs with the restriction code assigned to your goods. The prohibition sign is supplemented by the letter B, C, D or E where applicable. Under the ADR system, the absence of this supplementary plate identifies category A; you must still obey other closures, traffic lights and prohibitions. [ADR 2025, 8.6.2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • A single code B prohibits entry into tunnels B, C, D and E; C prohibits entry into C, D and E; D into D and E; and E into E. The code belongs to the goods and the category to the tunnel. [ADR 2025, 8.6.4](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Combined codes depend on the mode of transport. With D/E, transport in tanks or in bulk is prohibited through D and E tunnels; other transport is prohibited through E tunnels. To make the full decision, you need both the code and the actual mode of transport. [ADR 2025, 8.6.4](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • If you carry goods with different codes, you must apply the most restrictive applicable code to the whole load. Exemptions have their own rules, and certain marked transport operations involving limited quantities are subject to category E tunnel restrictions. [ADR 2025, 8.6.3 and 8.6.4](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

23Equipment to protect you and limit damage

A driver wearing a fluorescent vest, gloves and protective goggles checks two differently sized fire extinguishers and other equipment in the open compartment of a C1 truck parked beside the kerb, with a chock against its rear wheel.
The key idea

Choose equipment according to your load, applicable rules and the whole unit’s maximum mass.

8 kgGeneral middle-range total
12 kgGeneral upper-range total
2 kgEngine or cab minimum
6 kgOne additional extinguisher minimum
Transport unit: maximum mass and ADR rulesMinimum extinguishersMinimum powder capacity or equivalent
General: over 3,500 kg up to 7,500 kgtwo8 kg total; 2 kg for engine or cab; one additional 6 kg extinguisher
General: over 7,500 kgtwo12 kg total; 2 kg for engine or cab; one additional 6 kg extinguisher
Exemption 1.1.3.6one2 kg

Remember

  • Under general rules, carry a suitable chock per vehicle and two self-standing signs.
  • Each crew member needs a vest, portable light, gloves and eye protection.
  • Check requirements for eye-rinsing liquid, masks, a shovel, drain seal and collecting container.
  • Keep extinguishers accessible, protected and within inspection validity.
  • With a trailer, count the whole unit’s maximum mass.
  • To warn of your lorry immobilised on-road, use a certified connected V-16.

Exam trap: Wrong: ADR self-standing warning signs replace V-16. Right: use a certified connected V-16 to warn of your lorry immobilised on the road.

Read the full explanation
  • Under the general rules, you must carry a suitable wheel chock for each vehicle, two self-standing warning signs and eye-rinsing liquid. This liquid is not required for danger labels 1, 1.4, 1.5, 1.6, 2.1, 2.2 and 2.3. For each crew member, you must carry a fluorescent vest or fluorescent clothing, a portable lighting device, protective gloves and eye protection. [ADR 2025, 8.1.5.2 and note 2](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • You must carry an emergency escape mask for each crew member for labels 2.3 or 6.1. For solid or liquid substances with labels 3, 4.1, 4.3, 8 or 9, you must also carry a shovel, a drain seal and a collecting container. You must use them in accordance with the instructions in writing and with due regard for your safety. [ADR 2025, 8.1.5.3 and notes 3 and 4](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • Under the general ADR rules, a transport unit with a maximum permissible mass of more than 3,500 kg and up to 7,500 kg must carry at least two fire extinguishers, with a minimum total capacity equivalent to 8 kg of powder. One must be suitable for the engine or cab, with at least 2 kg, and at least one of the additional extinguishers must have a capacity of at least 6 kg. A 7,500 kg C1 lorry without a trailer falls within this range; check the mass of the whole unit when towing a trailer. [ADR 2025, 8.1.4.1](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • If the unit's maximum permissible mass exceeds 7,500 kg, the general rules require at least two extinguishers and a total capacity of 12 kg, retaining a minimum of 2 kg for the engine or cab and at least one additional extinguisher of 6 kg. For the exemption under subsection 1.1.3.6, however, the ADR minimum is one extinguisher with 2 kg of powder or equivalent. You must keep the extinguishers accessible, protected and with their inspections up to date; the unit's maximum mass and the applicable rules determine the equipment required. [ADR 2025, 8.1.4.1 to 8.1.4.5](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • The self-standing warning signs form part of the specific ADR equipment. To warn other road users that your lorry is immobilised on the road, you must use a certified connected V-16, whose use is explained in «Accidents, breakdowns and first aid». [RGC, art. 130.4](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a130); [RGV, Annexes XI and XII](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826).

24First steps after a leak or accident

A driver wearing a reflective vest talks on the phone from a safe area upwind of a light truck stopped on the shoulder, while vapours from a leak drift away in the opposite direction.
The key idea

After a leak or accident, raise the alarm and protect yourself without approaching danger.

112Urgent emergency call

Remember

  • If breakdown or accident prevents continuing, immediately follow the written instructions.
  • Call 112 urgently after an accident or incident.
  • When safe and practicable, brake, stop the engine and put on your vest.
  • Disconnect the battery using its switch, if fitted, only when safe and practicable.
  • Avoid ignition sources; do not touch spills or breathe gases, smoke or vapours.
  • Move away upwind; warn others and follow emergency services’ instructions.

Exam trap: Wrong: protect drains even if this exposes you to danger. Right: use equipment only when safe; do not improvise neutralisation, transfers or repairs.

Read the full explanation
  • If a breakdown or accident prevents you from continuing, you must immediately apply the instructions in writing and the other regulatory measures. Call 112 urgently in the event of an accident or incident. When possible, you must then inform the carrier and the consignor. The details to provide when calling are listed in «Fire and notifying the emergency services». [RD 97/2014, art. 20.1.a](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a20); [Directriz Básica de Protección Civil (Basic Civil Protection Guideline), transport of dangerous goods, BOE-A-2026-9161](https://www.boe.es/buscar/act.php?id=BOE-A-2026-9161).
  • When safe and practicable, you must apply the brake, switch off the engine and disconnect the battery using its isolator switch, if fitted. You must avoid sources of ignition and put on your high-visibility vest. Every action depends on safety: you must not approach a dangerous leak to reach a control or retrieve an object. [ADR 2025, 5.4.3.4](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • You must not step in or touch spilled substances, or inhale gases, smoke, dust or vapours. You must move away and stay upwind, keeping out of the path of the cloud. Warn other people to move away and follow the instructions of the emergency services. [ADR 2025, 5.4.3.4](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • You may use the equipment on board to prevent the spill from reaching drains or the aquatic environment only when it is safe. You must avoid improvising neutralisation, transfers or repairs. Protecting drains does not justify exposing yourself to an unknown substance or entering a contaminated area. [ADR 2025, 5.4.3.4](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).

25Fire and notifying the emergency services

A driver wearing a reflective vest makes a phone call beside another person, both far away from a light truck with its cargo on fire stopped on the right shoulder.
The key idea

Prioritise moving people away and helping emergency services respond.

Remember

  • Only when safe, use extinguishers on small tyre, brake or engine fires.
  • Never fight fires in the load compartment.
  • Report the location, vehicle condition and what happened.
  • Report goods, casualties, weather and other relevant circumstances.
  • Provide documents and plate numbers only when safe.
  • In tunnels, raise the alarm, obey instructions and use signposted evacuation routes where appropriate.

Exam trap: Wrong: reverse out of a tunnel on your own initiative. Right: follow its emergency procedure; do not reverse or turn round on your own initiative.

Read the full explanation
  • If you can do so safely, you may use the fire extinguisher to tackle a small or initial fire involving the tyres, brakes or engine compartment. You must not tackle fires in load compartments. In a lorry carrying dangerous goods, your priority is to move people away and allow specialist responders to intervene. [ADR 2025, 5.4.3.4](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • When notifying the emergency services, you must provide these six details: the location of the incident; the condition of the vehicle and the nature of the incident; details of the dangerous goods being carried; whether there are any casualties; weather conditions; and any other relevant circumstances for assessing the effects on people, property or the environment and the possibilities for preventive intervention. You may give the UN number and the hazard identification number if you can check them safely. [RD 97/2014, art. 20.2](https://www.boe.es/buscar/act.php?id=BOE-A-2014-2110#a20).
  • You must keep the transport documents available for the emergency services, provided you can do so safely. [ADR 2025, 5.4.3.4](https://www.boe.es/diario_boe/txt.php?id=BOE-A-2025-77&lang=es).
  • If the incident occurs in a tunnel, you must also follow its emergency procedure: raise the alarm using the available means, obey its instructions and use the signposted evacuation routes when appropriate. You must not start reversing or make a U-turn on your own initiative to escape with the lorry. The general response is covered in «Accidents, breakdowns and first aid». [RGC, arts. 95 and 97](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514).

Check the transport operation before setting off

Check the goods, driver, vehicle and route together.

  1. Identify the substances and mode of transport in the documentation; check which exemptions actually apply.
  2. Check the scope and validity of your ADR authorisation where required, and the relevant vehicle documentation.
  3. Check packages, markings and plates, documents, instructions you can understand and accessible equipment.
  4. Plan the permitted route, traffic restrictions and tunnels; do not set off if any required condition is unmet.

Check whether you can use a tunnel

You need the load’s restriction code and the tunnel category.

  1. Find the restriction code for each type of goods and its mode of transport.
  2. Determine the restriction applicable to the entire load and check the relevant exemptions.
  3. Read the tunnel category and any signposted time restrictions.
  4. Compare the two; if entry is prohibited, use the authorised alternative route and follow traffic instructions.

Respond to an emergency involving the load

Follow the instructions in writing only when you can do so safely.

  1. Stop and immobilise the transport unit without increasing the danger; carry out shutdown and warning measures when safe.
  2. Avoid ignition sources and contact with the product; move away from the spill and the cloud.
  3. Call 112 and report the location, goods, vehicle condition, casualties and relevant circumstances.
  4. Provide the documents without exposing yourself to danger; warn other people and follow the emergency response instructions.
  5. Then notify the carrier and consignor when possible; do not fight a fire in the load compartment.

Finished this module?

Mark it as read and you will see your progress on the theory list.

Next module