Theory · C1 Licence - Light Truck · Module 7 of 18

Speed and safe following distances

You learn to choose your light lorry’s speed according to the road, load, visibility and grip. You distinguish reaction, braking and stopping distances, and answer C1 questions on minimum speeds, the 50-metre gap, the 5-metre gap when following cyclists in urban areas and distances in tunnels.

33 min read24 sectionsReviewed Nov 3, 2026
A green light truck follows an orange car with a wide gap on a two-way road in a Mediterranean landscape.
Appropriate speed and safe following distance

1Legal speed and appropriate speed

A light truck travels in the right-hand lane with its brake lights illuminated before patches of ice on a rural road.
The key idea

Choose a speed that lets you control your lorry and stop within the space you see.

Remember

  • Respect maximum and minimum speed limits.
  • Slow down for traffic, weather and road conditions.
  • Consider your condition, your lorry and its load.

Exam trap: Wrong: staying below the maximum is always safe. Right: slow down further when conditions require it.

Read the full explanation
  • Your speed must comply with the maximum and minimum limits and suit the circumstances. The maximum sets an upper limit and the minimum prevents you from driving abnormally slowly without justification; an appropriate speed requires you to keep control of your lorry and be able to stop for an obstacle within your field of vision. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45) [RGC, art. 49](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a49)
  • You can drive at an inappropriate speed even if you do not exceed any maximum limit. If you drive at 70 km/h on an icy conventional road, staying below the lorry limit of 80 km/h does not guarantee safety. You must slow down as much as grip, visibility, traffic and the vehicle’s response require. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)
  • You must take account of your physical and mental condition, the condition and characteristics of your lorry and its load, the road layout and surface, the weather and traffic. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)

2Autopistas (motorways) and autovías (dual carriageways): 90 km/h

A light truck with an orange cab and green cargo box travels in the right lane of a divided motorway amid dry hills and cypress trees.
The key idea

Outside built-up areas, your ordinary lorry has a general maximum of 90 km/h.

90 km/hLorry maximum
Vehicle outside built-up areasMaximum on autopistas and autovías
Your ordinary lorry90 km/h
Motorhome with maximum authorised mass above 3,500 kg and up to 7,500 kg90 km/h

Remember

  • Apply this maximum on autopistas and autovías.
  • Your limit stays the same when you drive without a load.
  • A higher general road sign does not raise your lorry’s maximum.

Exam trap: Wrong: you can drive faster without a load. Right: your lorry keeps its general maximum.

Read the full explanation
  • Outside built-up areas, your general maximum speed in an ordinary lorry is 90 km/h on both autopistas and autovías. You must apply this limit to your vehicle even if the road has several lanes, separate carriageways for each direction and a general sign allowing other vehicle categories to travel faster. [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48)
  • Driving without a load does not change your lorry’s general maximum speed. Its classification and maximum authorised mass are different from its actual mass on that journey: unloading the goods does not move the vehicle into another category in the speed limit table. [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48)
  • If you drive a motorhome with an MMA (maximum authorised mass) over 3,500 kg and no more than 7,500 kg on a C1 licence, you must apply the same speed limits as for a lorry: article 48 places it in the same category in the interurban speed limit table. You study its parking rule in “Position your vehicle when stopping or parking”, in “Manoeuvres with your lorry”. [RGCond, art. 4](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#a4) [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48)

3Conventional roads: 80 km/h

A light truck with a green box body and orange cab travels in its right-hand lane on a conventional road with a paved shoulder and Mediterranean scenery.
The key idea

Outside built-up areas, your lorry’s general maximum on surfaced conventional roads is 80 km/h.

80 km/hLorry maximum

Remember

  • Neither a wide hard shoulder nor extra lanes raise your limit.
  • Your maximum stays the same with a physical barrier between directions.

Exam trap: Wrong: a wide hard shoulder allows 90 km/h. Right: your lorry’s maximum remains 80 km/h.

Read the full explanation
  • Outside built-up areas, your general maximum speed in a lorry on a surfaced conventional road is 80 km/h, including roads reserved for motor vehicles. Neither a wide arcén (hard shoulder) nor several lanes increases your limit. [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48)
  • On a conventional road with a physical separation between directions, your lorry retains its general maximum speed of 80 km/h. The option to signpost a limit of 100 km/h is reserved for the categories listed in article 48.1.a.1.º. [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48)

4Unsurfaced roads: 30 km/h

A light truck travels to the right along a dirt and gravel road with potholes in a rural Mediterranean landscape.
The key idea

On unsurfaced roads, you must respect the maximum of 30 km/h.

30 km/hUnsurfaced road maximum

Remember

  • Apply this maximum on dirt access roads to loading areas too.
  • Slow down further for mud, gravel, dust or poor visibility.
  • With dangerous goods, respect this maximum and any lower restriction.

Exam trap: Wrong: a dirt hard shoulder makes the whole road unsurfaced. Right: check the carriageway’s surface.

Read the full explanation
  • On an unsurfaced road, you must comply with the maximum speed of 30 km/h in your lorry too, including on access roads to farms or other operating sites or loading areas. [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48)
  • You must pay attention to the surface of the road you are driving on. If the carriageway of a conventional road is surfaced and only the hard shoulder is unsurfaced, the shoulder’s surface does not make the carriageway an unsurfaced road or impose the maximum speed of 30 km/h on it. [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48)
  • Where there are potholes, mud, dust or gravel, you must slow down below that maximum as much as grip and visibility require. On an unsurfaced access road to a loading area, also adapt your speed to the surface condition and the space available to stop your lorry. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)
  • When you carry dangerous goods on these roads, this separate maximum applies, together with any lower restriction; the reduction in the interurban speed limit table is explained in “Dangerous goods and other restrictions”. [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48)

5Streets: 20, 30 and 50 km/h

A light truck with a green cab travels to the right along a street with the roadway and pavements at the same level, beside two pedestrians walking on the paved area.
The key idea

In towns, check pavement height and which lanes you can count.

20 km/hCarriageway and pavement level
30 km/hOne lane each way
50 km/hSeveral lanes each way
Urban roadGeneral maximum for your ordinary lorry
Carriageway and pavement at the same level20 km/h
One countable lane in each direction30 km/h
Two or more countable lanes in each direction50 km/h

Remember

  • Check whether signs change the limit.
  • Do not count reserved lanes or lanes exclusively for public transport.
  • With dangerous goods, apply the specific restrictions.

Exam trap: Wrong: you count a bus-only lane. Right: with only one ordinary lane each way, the general maximum is 30 km/h.

Read the full explanation
  • On an urban road where the carriageway and pavement form a single level surface, you must comply with the general maximum speed of 20 km/h. The carriageway and pavement are at the same level; this layout requires you to pay particular attention to people who may approach your lorry’s path. [RGC, art. 50](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a50)
  • On urban roads with a single lane in each direction, you must comply with the general maximum speed of 30 km/h, unless specific rules are indicated by signs. [RGC, art. 50](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a50)
  • On urban roads with two or more lanes that count towards the limit in each direction, you must comply with the general maximum speed of 50 km/h in your ordinary lorry. For dangerous goods, the restriction explained in the relevant section applies. [RGC, art. 50](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a50)
  • When counting lanes, you must exclude those reserved for particular users and those exclusively for public transport. For these purposes, a street with one ordinary lane and one bus-only lane in each direction still counts as having one lane in each direction, with a general maximum speed of 30 km/h. [RGC, art. 50](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a50)

6Municipal rules and stretches of road through towns

A light truck travels in its right-hand lane on a road that passes through a village of white houses and continues toward hills.
The key idea

Distinguish ordinary streets, through roads and motorways within built-up areas.

50 km/hGeneral through-road maximum
80 km/hMotorways within built-up areas
90 km/hLorry maximum after increase
Road within a built-up areaMaximum for your ordinary lorry
TravesíaGenerally 50 km/h; obey specific restrictions
Autopista or autovíaGenerally 80 km/h; agreement and signs can raise this to 90 km/h

Remember

  • Obey municipal signs that lower speed limits.
  • Exceptionally, signs can allow 50 km/h on streets with one lane each way.
  • A travesía is a through road within a built-up area.
  • Respect any lower restriction that applies to you.

Exam trap: Wrong: you automatically apply street lane rules to a travesía. Right: its general maximum is 50 km/h, subject to specific restrictions.

Read the full explanation
  • The municipal authority may lower the general urban limits by means of specific signs. Exceptionally, it may raise the limit on a road with a single lane in each direction to 50 km/h, also by means of signs. [RGC, art. 50](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a50)
  • On a stretch of road through a town, the general maximum speed is 50 km/h for all types of vehicle, subject to any applicable specific restrictions. The lane-based rules for ordinary urban roads do not automatically apply to a stretch of road through a town, which is a section of road that runs through a built-up area. [RGC, art. 50](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a50)
  • The limit on a stretch of road through a town may be lowered by agreement between the municipal authority and the road authority, with specific signs. If you encounter a signposted limit of 30 km/h, you must comply with it even if you remember that the general rule for a stretch of road through a town is 50. [RGC, art. 50](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a50)
  • On autopistas and autovías within built-up areas, the general maximum speed is 80 km/h. It may be raised by agreement and signs, without exceeding the corresponding general limit outside built-up areas: for your ordinary lorry, that upper limit is 90 km/h. You must still comply with any lower specific restriction. [RGC, art. 50](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a50) [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48)

7Dangerous goods and other restrictions

A light truck with a blank rectangular orange panel on its front travels in its right-hand lane on a conventional road in a Mediterranean landscape.
The key idea

With dangerous goods or special transport, apply the specific limits and any lower restrictions.

10 km/hReduction in outside-town speed table
80 km/hDangerous goods on motorways
70 km/hDangerous goods on conventional roads
40 km/hDangerous goods: specified urban roads
Vehicle and caseMaximum, subject to lower restrictions
Your lorry carrying dangerous goods: autopista or autovía outside built-up areas80 km/h
Your lorry carrying dangerous goods: surfaced conventional road outside built-up areas70 km/h
Your lorry carrying dangerous goods: travesía or street with several countable lanes each way40 km/h
Group 1 special transport: general authorisation70 km/h
Group 1 special transport: specific authorisation60 km/h
Group 1 special transport: exceptional authorisationSpeed stated in authorisation, never above 60 km/h

Remember

  • With dangerous goods, respect 20 km/h where carriageway and pavement share one level.
  • With dangerous goods, respect 30 km/h on streets with one lane each way.
  • Do not subtract ten from every sign: apply the lower limit.
  • For special transport, also obey lower limits on your ITV roadworthiness card.

Exam trap: Wrong: with dangerous goods, you subtract ten from every sign. Right: on a conventional road signed at 50 km/h, obey 50 km/h.

Read the full explanation
  • If you carry dangerous goods, you must reduce the maximum speeds in the interurban speed table by 10 km/h for the relevant vehicle and road. For your lorry, this means 80 km/h on an autopista (motorway) or autovía (dual carriageway) and 70 km/h on a surfaced conventional road, subject to any lower restrictions and your duty to adapt your speed. [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48)
  • On urban roads with two or more lanes per direction that count towards the limit, and on stretches of road through a town, you must observe a limit of 40 km/h when carrying dangerous goods. On streets where the carriageway and pavement share a single level, and streets with one lane per direction, you must observe the applicable lower limits of 20 and 30 km/h. [RGC, art. 50](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a50)
  • If you carry dangerous goods on a conventional road with a 50 km/h limit, you must observe 50 km/h, because the lower of your own maximum (70) and the signposted limit for the stretch applies. [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48) [RGC, art. 52](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a52)
  • If you operate under the special transport rules for group 1 of annex III, you must observe 70 km/h with a general authorisation and 60 km/h with a specific authorisation. With an exceptional authorisation, you must observe the speed specified in it, which cannot exceed 60 km/h. In all three cases, any more restrictive limit on the tarjeta ITV (vehicle roadworthiness test card) takes precedence, along with any lower restrictions applicable to the stretch. [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48) [RGC, annex III, group 1, section 4](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#aniii)

8Signs, overtaking and the speed limiter

A green light truck follows an orange car in its lane on a rural two-way road beside a no-overtaking sign.
The key idea

Respect every applicable speed limit, including when overtaking or using a speed limiter.

90 km/hRequired speed limiter maximum
Up to 750 kgSame limits with this trailer
30 km/hAuthorised testing speed increase

Remember

  • Stay within your maximum when overtaking; abandon the manoeuvre if unsafe.
  • A required speed limiter does not replace road signs.
  • With a trailer up to 750 kg maximum authorised mass, outside-town limits stay unchanged.
  • Obey personal licence speed restrictions and display the required rear sign.
  • Testing requires a special permit and the authorised route.
  • Testing permits allow no increase on streets, travesías or sections with specific speed signs.

Exam trap: Wrong: your limiter always allows 90 km/h. Right: respect every lower limit too.

Read the full explanation
  • You must observe the specific limits for the stretch, including temporary or variable limits, together with the maximum speeds for your vehicle and any personal or transport restrictions. [RGC, art. 47](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a47) [RGC, art. 52](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a52)
  • When overtaking, you must stay within the maximum speed applicable to your lorry, even though you need a sufficient speed difference relative to the vehicle you are overtaking; if you cannot complete the manoeuvre legally and safely, you must abandon it. [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48) [RGC, art. 85](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a85)
  • If your lorry is required to have a speed limiter, it must prevent you from exceeding 90 km/h; its scope and exemptions are explained in “Speed limiter: vehicles that must have one” and “Speed limiter exemptions and operation”, in the “Dimensions and masses of the light lorry” module. The device does not replace the speed limits for the stretch. [RD 1417/2005, art. 4](https://www.boe.es/buscar/act.php?id=BOE-A-2005-19990#a4) [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48)
  • With a special permit for testing, you can exceed the maximum speeds by up to 30 km/h on the authorised route, except on urban roads, stretches of road through a town and stretches with specific speed-limit signs. [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48)
  • If you attach a trailer with an MMA (maximum authorised mass) not exceeding 750 kg to your lorry, within your C1 entitlement, you must apply the same row of interurban speeds as for the lorry alone: the table groups lorries and motor vehicles towing trailers together. [RGCond, art. 4](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#a4) [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48)
  • If your licence imposes a speed restriction because of your personal circumstances, you must observe it and display the speed restriction sign required by the vehicle regulations visibly at the rear. [RGC, art. 52](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a52)

9General minimum speeds

A light truck with an orange cab and green box travels in the right lane of an empty divided motorway among dry hills and cypress trees.
The key idea

Unless you have a justified reason, respect the minimum speed for your road.

60 km/hAutopista and autovía minimum
40 km/hLorry minimum on conventional roads
15 km/hUnsurfaced road minimum
RoadYour lorry’s minimum, unless you have a justified reason
Autopista or autovía60 km/h
Conventional road40 km/h
Unsurfaced road15 km/h
Urban road with general maximum of 20 km/h10 km/h
Urban road with general maximum of 30 km/h15 km/h
Urban road with general maximum of 50 km/h25 km/h

Remember

  • On autopistas and autovías, respect the minimum even without other traffic.
  • On other roads, use half your vehicle category’s general maximum.
  • Do not calculate this half from a specific maximum speed sign.
  • Slow down or stop when safety requires it.

Exam trap: Wrong: you calculate 45 km/h as the autopista minimum. Right: the general minimum is 60 km/h, unless you have a justified reason.

Read the full explanation
  • On autopistas and autovías, you must maintain at least 60 km/h in your lorry unless there is a justified reason, even if there are no other vehicles. These roads have their own minimum speed for motor vehicles. [RGC, art. 49](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a49)
  • On other roads, the minimum speed is half the generic speed limit of your vehicle category on that road. For an ordinary lorry on a conventional road, this is 40 km/h; you must calculate it from the generic maximum, even if you encounter a specific maximum speed sign on the stretch. [RGC, art. 49](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a49)
  • On an unsurfaced road with a generic maximum of 30 km/h, half is 15 km/h. For ordinary urban roads with generic limits of 20, 30 and 50, the halves are 10, 15 and 25 km/h. You must interpret these calculations in conjunction with the safety and traffic exceptions, rather than as an obligation to maintain speed when faced with a hazard. [RGC, art. 49](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a49)

10When you can drive more slowly

A light truck travels in the right lane behind two cars in a traffic queue, with both rear hazard indicators illuminated.
The key idea

You can drive below the minimum when safety or a legal exception requires it.

Remember

  • You can slow down for queues, ice, breakdowns or other risks.
  • Legal exceptions cover special vehicles, special transport and escorting other vehicles.
  • Use hazard lights if you cannot reach the minimum and risk being hit behind.
  • With your lorry above 3,500 kg maximum authorised mass, normally stay on the carriageway.
  • Use the hard shoulder only for emergency reasons.
  • Emergency causing abnormally slow driving? Leave autopista or autovía at first exit.

Exam trap: Wrong: you must maintain the minimum even on ice. Right: slow down if necessary for safety; on an autopista or autovía, an emergency forcing abnormally slow driving requires you to leave at the first exit.

Read the full explanation
  • You can drive below the minimum speed if traffic, vehicle or road conditions prevent you from maintaining a higher speed safely, such as when there is a traffic queue, ice or a breakdown. [RGC, art. 49](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a49)
  • You can drive below the minimum speed in the cases provided for by the regulations for special vehicles, special transport and protecting or escorting other vehicles, adapting your speed to the vehicle you accompany. [RGC, art. 49](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a49)
  • If you cannot reach the required minimum speed and there is a risk of a rear-end collision, you must switch on your hazard warning lights while driving. [RGC, art. 49](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a49)
  • With your lorry of MMA over 3,500 kg, you must remain on the carriageway when driving slowly; you can only use the arcén (hard shoulder) in an emergency. The obligation to move onto a usable hard shoulder of sufficient width when an emergency causes an abnormally low speed and seriously disrupts traffic applies to vehicles with an MMA not exceeding 3,500 kg. [RGC, art. 31.1](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a31) [RGC, art. 36.1](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a36)
  • If an emergency forces you to drive at an abnormally low speed on an autopista or autovía, you must leave it at the first exit. [RGC, art. 38](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a38)

11Lanes with special limits

A green light truck travels on its normal carriageway while an orange passenger car uses a contraflow lane separated by cones from opposing traffic on the other side of the central reservation.
The key idea

Before using a special lane, check whether your lorry is allowed and which limits apply.

60 km/hSpecial minimum, unless lower limits
80 km/hSpecial maximum, unless lower limits
Lane or caseRule for your lorry
Contraflow lane opened to improve traffic flowYou cannot enter
Contraflow for roadworks: your lorry allowed on the road, with no express prohibitionBetween 60 and 80 km/h, unless lower limits apply
Only normal-direction lane beside contraflowBetween 60 and 80 km/h, unless lower limits apply
Several normal-direction lanes beside contraflowApplicable ordinary and specific speeds
Temporary additional lane and hard shoulders opened to trafficBetween 60 and 80 km/h, unless lower limits apply

Remember

  • Use dipped headlights in these lanes and adjacent normal-direction lanes, day and night.
  • Obey lower limits that are set or signed.
  • Do not enter lanes carrying oncoming traffic, even to overtake.
  • Make sure your lorry does not move or disturb the lane markers.

Exam trap: Wrong: your lorry can use any contraflow lane. Right: traffic-flow contraflow is prohibited; roadworks contraflow is allowed if your lorry is permitted on that road and there is no express prohibition.

Read the full explanation
  • A lane opened to traffic in the opposite direction to normal to improve traffic flow is reserved for motorcycles and cars without trailers; you must not use it in your lorry. [RGC, art. 41](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a41)
  • If a lane in the opposite direction is opened because of roadworks, you can use it in your lorry if your lorry is allowed on that road, unless expressly prohibited. You must drive between 60 and 80 km/h, or observe any lower limits established or signposted. [RGC, art. 41](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a41)
  • In the normal-direction lanes next to the lane opened in the opposite direction, if you have only one lane in your direction, you must apply the same speed range as in the previous point; if you have several, the relevant ordinary and specific speed limits apply. [RGC, art. 41](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a41)
  • A temporary additional lane is opened on a two-way carriageway using temporary signs and delineation devices: using both hard shoulders creates two lanes in one direction and one in the other. In the additional lane and on the hard shoulders opened to traffic, you must drive between 60 and 80 km/h, or observe any lower limits established or signposted. [RGC, art. 42](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a42)
  • In these lanes and the adjacent normal lanes, you must use dipped beam by day and by night. [RGC, art. 41](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a41) [RGC, art. 42](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a42)
  • In these layouts, you must respect the separation of traffic directions: you must not move sideways into lanes carrying traffic in the opposite direction, even to overtake; this prohibition in article 41 also applies to the temporary additional lane. [RGC, art. 41](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a41) [RGC, art. 42](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a42)
  • In these lanes and the adjacent normal-direction lanes, you must take care that your lorry does not move or disturb the permanent or mobile delineation devices that mark out the traffic lanes. [RGC, art. 41.1](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a41) [RGC, art. 42.1](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a42)

12Road users and access points that require you to slow down

A light truck with the driver on the left side of the cab is stopped before a pedestrian crossing where an elderly woman with a walking stick is crossing.
The key idea

Slow down when people, animals or vehicles may enter your path.

Remember

  • Slow down, or stop, for pedestrians in your path or likely to enter it.
  • Take extra care around children, older people and people with disabilities.
  • Slow near cyclists, schools, markets and pedestrian crossings without traffic lights or officers.
  • Watch for animals and exits from buildings or industrial sites.
  • Slow down when approaching stopped buses, especially school buses.
  • Outside built-up areas, slow for vehicles stopped on the carriageway or working recovery vehicles.

Exam trap: Wrong: you slow down only when a pedestrian enters your lane. Right: slow down when you can foresee them entering too.

Read the full explanation
  • You must slow down and even stop when pedestrians are in your path or you can foresee them entering it, especially children, older people, blind people or people with reduced mobility. From your lorry cab, anticipate them appearing from between obstacles. [RGC, art. 46](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a46)
  • You must slow down when approaching cycles, junctions, areas near cycle routes and pedestrian crossings without traffic lights or an officer controlling traffic. You must also do so near markets, educational establishments and places where you can expect children to be present. [RGC, art. 46](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a46)
  • You must slow down if animals are present or you can foresee them entering the road, and on stretches with buildings that open directly onto it. At an industrial access point, you must also assess exits and hidden areas: adapting your speed requires you to consider obstacles you can reasonably expect to encounter, even if they are not yet in your lane. [RGC, art. 46](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a46) [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)
  • When approaching a stationary bus, especially a school bus, you must slow down. Outside built-up areas, you must also do so when approaching vehicles immobilised on the carriageway or breakdown assistance vehicles on duty. You must anticipate hidden people and changes of course that reduce the available space. [RGC, art. 46](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a46)

13Junctions, passing oncoming vehicles and visibility

A light truck with the driver on the left side of the cab is stopped at a give-way sign at a junction beside a building that limits visibility.
The key idea

Slow down before junctions and places where you cannot see or pass safely.

50 km/hMaximum at described signed junctions

Remember

  • Slow at roundabouts, junctions without priority, narrow sections and places with poor visibility.
  • At properly signed junctions with virtually no visibility, do not exceed 50 km/h.
  • Obey lower limits and stop if needed to look or give way.
  • Slow when passing oncoming vehicles if space or conditions make passing unsafe.
  • At night, you must be able to stop within the area your lights illuminate.
  • Approach level crossings and movable bridges below the maximum permitted speed.

Exam trap: Wrong: you aim for 50 km/h at a properly signed junction with virtually no visibility. Right: this is an upper limit; slow further or stop if needed.

Read the full explanation
  • You must slow down as you approach roundabouts and junctions where you do not have priority, narrow sections and places with reduced visibility. You must stop if necessary. [RGC, art. 46](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a46)
  • At properly signposted junctions with virtually no visibility, you must not exceed 50 km/h in the circumstances covered by article 46.1.h. This is a specific upper limit, not a target speed or permission to exceed a lower limit; you must slow down further or stop if necessary to observe and give way. [RGC, art. 46](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a46)
  • When you meet an oncoming vehicle, you must slow down if the road, the vehicles or the weather make it difficult to do so safely. Take account of the width and projecting parts of your lorry and the other vehicle. [RGC, art. 46](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a46)
  • At night, you must adjust your speed to the range of your lights. If you switch to lights that illuminate a shorter distance, or a fault forces you to use less intense lighting, you must slow down until you can stop within the illuminated area. The use of each light is covered in “Lights and signalling on your light lorry”. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45) [RGC, art. 107](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a107)
  • As you approach a level crossing or a movable bridge, you must take extra care and slow down below the maximum permitted speed. [RGC, art. 95](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a95)

14Rain, ice and lorry stability

A green light truck travels in the rain on a wet road and maintains a wide gap behind the orange car ahead.
The key idea

In bad weather or when stability is poor, slow down before you lose control.

Remember

  • Slow down on slippery surfaces or when you could splash others.
  • Adjust your speed for fog, heavy rain, snow, dust or smoke.
  • Slow down if you are dazzled too.
  • Consider your load, the slope, stability and brakes.
  • Slow down before bends or descents.

Exam trap: Wrong: staying below the maximum guarantees stability. Right: adjust your speed for your load, the bend and the surface.

Read the full explanation
  • You must slow down on slippery road surfaces and whenever you may splash or spray water, gravel or other material onto other road users. [RGC, art. 46](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a46)
  • In thick fog, heavy rain, snowfall, dust or smoke, you must adjust your driving to the available visibility and grip. You must also slow down if you are dazzled. [RGC, art. 46](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a46) [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)
  • To choose your speed, you must take account of the load, stability, gradient and braking capability. On bends or descents, you must slow down in advance to retain control; a speed below the maximum may still be unsuitable for a laden lorry. Descent techniques are covered in “Control a long descent”, in “Lorry driving techniques”, and retarders in “Brakes and retarders on light lorries”. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)

15Slowing down without causing a rear-end collision

A light truck travels in the right lane with its brake lights illuminated before a bend, while an orange car follows at a distance.
The key idea

Before braking hard, check the risk and warn others whenever you can.

Remember

  • Unless danger is immediate, check that slowing down will not endanger drivers behind.
  • Warn in advance and avoid sudden braking.
  • When possible, warn with repeated brake lights or the prescribed arm signal.
  • Warn others when traffic forces you to slow down too.
  • If someone overtakes you, do not accelerate or make overtaking harder.

Exam trap: Wrong: you must always slow down if danger arises while someone overtakes. Right: slow down unless the overtaking driver abandons the manoeuvre and your slowing down would compromise safety.

Read the full explanation
  • Unless there is imminent danger, before slowing down considerably you must check that you can do so without endangering those behind you, warn them in advance and avoid slowing down abruptly. In your lorry, you must anticipate signs, bends and traffic queues to give yourself time and space, instead of braking late when you can avoid it. [RGC, art. 53](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a53)
  • Whenever possible, you must warn of your intention to brake considerably or bring your vehicle to a standstill by repeatedly activating the brake lights or using the prescribed arm signal. You must also give this warning when traffic forces you to slow down; it does not depend on whether you intend to park. [RGC, art. 109](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a109)
  • If you are being overtaken, you must not increase your speed or hinder the manoeuvre. You must slow down if a danger arises during it, subject to the exception in the regulations where the overtaking driver abandons the manoeuvre and your slowing down would compromise safety. The manoeuvre is covered in “Your duties when you are being overtaken”, in “Manoeuvres with your lorry”. [RGC, art. 86](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a86)

16Reaction distance and reaction time

A light truck travels in its lane toward a fallen branch some distance ahead, while the driver, seated on the far side of the cab on the left, looks forward.
The key idea

While you react, you travel some distance before you start braking.

3.6Divisor for calculating distance
25 m90 km/h for one second
22.2 m80 km/h for one second
Example speedYour distance with a one-second reaction
90 km/h25 m
80 km/hAbout 22.2 m

Remember

  • Your reaction starts when you notice danger and ends when you start braking.
  • With the same reaction time, doubling your speed doubles your reaction distance.
  • Sleepiness, fatigue, alcohol and distractions can delay your response.
  • To calculate metres, divide km/h by 3.6, then multiply by seconds.
  • A one-second example does not guarantee your actual reaction time.

Exam trap: Wrong: you call the distance travelled before you press the brake braking distance. Right: that is reaction distance.

Read the full explanation
  • Your reaction distance is the distance you travel from the moment you perceive a danger until you begin to apply the brake. Your lorry continues moving during this interval. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)
  • Your reaction time is measured in seconds and depends on your alertness and condition. Your reaction distance is measured in metres and also depends on speed: for the same reaction time, doubling your speed doubles this distance. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)
  • As a learning calculation, you can work out the distance in metres by dividing the speed in km/h by 3.6 and multiplying by the number of seconds. If you assume a reaction time of one second, you travel 25 m at 90 km/h and about 22.2 m at 80 km/h; these are mathematical examples, not mandatory times or distances prescribed by the regulations. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)
  • You must allow for the fact that sleepiness, fatigue, alcohol or distraction can delay your response. Using one second in an exercise does not guarantee that you react within that time; a dry road surface does not make up for a lack of attention either. You must adapt your driving and following distance to your actual ability to respond. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)

17Braking distance

A light truck brakes in its lane on a wet road, with its brake lights on and ample clear space ahead.
The key idea

Your braking distance starts when you brake and ends when your lorry stops.

Remember

  • Consider your speed, mass and how your load is positioned.
  • Consider your brakes, tyres, suspension and road grip.
  • With unchanged conditions and deceleration, doubling speed needs about four times the braking distance.
  • With water or less grip, increase your gap and slow down.

Exam trap: Wrong: doubling speed only doubles braking distance. Right: with unchanged conditions and deceleration, you need about four times the distance.

Read the full explanation
  • Your braking distance is the distance you travel from the moment you apply the brake until your lorry comes to a stop. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)
  • To assess braking, you must consider speed, mass, the load and its placement, the brakes, tyres, shock absorption and grip. [DGT, braking distance](https://sede.dgt.gob.es/.galleries/permisos-de-conducir/certificacion-aptitud-profesores-formacion-vial/2024/Manual-II-Cuestiones-de-Seguridad-Vial-2024.pdf#page=1) [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)
  • If conditions and deceleration remain the same, your braking distance increases approximately with the square of your speed: if you double your speed, you need about four times the distance. You must distinguish this relationship from reaction distance, which increases in direct proportion to speed for the same reaction time. [DGT, Road safety manual, speed topic](https://sede.dgt.gob.es/.galleries/permisos-de-conducir/certificacion-aptitud-profesores-formacion-vial/2024/Manual-II-Cuestiones-de-Seguridad-Vial-2024.pdf#page=1)
  • With water on the road or reduced grip, you may need a longer braking distance at the same speed. You must increase your following distance and slow down according to the road surface and how your laden lorry responds: the margin that is sufficient on a dry road surface may be insufficient on a slippery surface. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45) [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)

18Total stopping distance

A light truck facing right occupies its lane, with two consecutive green and orange sections between its front and a rock on the road.
The key idea

To find the distance you need to stop, add your reaction distance and braking distance.

25 mExample reaction distance
40 mExample braking distance
65 mExample total stopping distance

Remember

  • Add reaction distance and braking distance to find your total stopping distance.
  • If you react later, you travel further before braking.
  • If you lose grip, your braking distance may increase.
  • Compare your total stopping distance with the clear space you can see.
  • The example figures are only for practising the addition.

Exam trap: Wrong: you compare visible space only with braking distance. Right: include the distance you travel while reacting.

Read the full explanation
  • You must add your reaction distance and braking distance to obtain your stopping distance, also called your technical stopping distance: the distance you travel from the moment you perceive the need to brake until your lorry is stationary. [DGT, stopping distance](https://sede.dgt.gob.es/.galleries/permisos-de-conducir/certificacion-aptitud-profesores-formacion-vial/2024/Manual-II-Cuestiones-de-Seguridad-Vial-2024.pdf#page=1)
  • If an exercise gives you a reaction distance of 25 m and a braking distance of 40 m, you need 65 m to stop. These are hypothetical figures for practising adding the two phases together, without attributing that distance to a particular lorry model, load or speed. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)
  • A delay in your reaction increases your total stopping distance even if you then brake just as effectively. A loss of grip increases the braking part even if you react just as quickly. You must identify which phase changes in the scenario so that you do not attribute a direct change in your mental reaction time to the state of the road surface. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)
  • You must compare your total stopping distance with the visible, clear space ahead, not just your braking distance. If you can see an obstacle at a distance shorter than you need to react and stop, you must reduce your speed, even if you have not yet reached the signposted maximum. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45)

19Following distance to avoid collisions

A green light truck maintains a wide gap behind an orange car with its brake lights on, while both travel to the right within their lane.
The key idea

Leave enough space to stop safely if the vehicle ahead brakes suddenly.

5 mFollowing cyclists in urban areas

Remember

  • Keep your safety gap in town, outside town and when preparing to overtake.
  • Increase your gap with higher speed, less grip or worse visibility.
  • If someone fills your gap, restore it gradually without creating danger.
  • Obey minimum-gap signs and leave more space if needed.
  • In urban areas, leave at least 5 m behind cyclists in the same lane.
  • Increase this distance if safety requires it.

Exam trap: Wrong: you can follow a cycling group closely because its riders stay together. Right: in your lorry, keep your own safe gap.

Read the full explanation
  • If you drive behind another vehicle, you must leave enough space to stop without a collision if it brakes sharply. You must take particular account of your speed, grip and braking conditions. This obligation applies when you drive your lorry both in towns and on roads outside towns, even if you intend to overtake. [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)
  • You must increase the gap when your speed increases, grip decreases, visibility worsens or your response may be slower. You must also consider the condition and load of your lorry. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45) [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)
  • The safe following distance is the gap between vehicles; the stopping distance is the distance you need to stop. You must understand how they relate without treating the terms as interchangeable in every question: the vehicle ahead may also move while you brake, but you must keep a sufficient margin to avoid hitting it if it brakes sharply. [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)
  • If another vehicle takes up part of the gap you have left, you must gradually restore a safe gap, avoiding braking that endangers those behind you. [RGC, art. 53](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a53) [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)
  • The exception allowing cyclists to ride in a group without this basic gap applies to the cyclists, who must take extra care to avoid rear-end collisions. When you follow them in your lorry, you must maintain your own safety margin; you cannot use their exception simply because you are driving behind the group. [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)
  • A sign requiring a minimum gap also applies to your lorry. You must keep at least the distance shown and increase it if safety requires more; the end of the restriction does not remove your general obligation to avoid rear-end collisions. You study the meaning and scope of distance signs in “Signs and their hierarchy for C1”. [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)
  • In urban areas, if you follow cyclists in the same lane, you must leave at least 5 m and increase this gap if safety requires it; you study how to overtake in “Protect cyclists and other vulnerable road users”, in the “Manoeuvres with your lorry” module. [RGC, art. 153.4](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a1-6) [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)

20The lorry’s 50-metre gap

An orange light truck follows a green car with a wide gap in its lane on a rural two-way road.
The key idea

When the additional gap rule applies, leave at least 50 m in your lorry.

50 mMinimum additional gap
3,500 kgMaximum authorised mass threshold
10 mTotal length threshold
Vehicle covered when the additional gap appliesAlternative condition
Your lorryMaximum authorised mass above 3,500 kg
Vehicle or combination qualifying by lengthTotal length above 10 m

Remember

  • Without signalling an intention to overtake, leave room for drivers behind to overtake you.
  • When this duty applies, your lorry needs at least 50 m.
  • Exceeding either the mass threshold or the total length threshold is enough.
  • Leave a larger gap if needed to avoid hitting the vehicle ahead.

Exam trap: Wrong: you must exceed both 3,500 kg and 10 m. Right: either condition is enough; apply 50 m when required if you are not signalling an intention to overtake.

Read the full explanation
  • If you follow another vehicle without signalling your intention to overtake, you must also leave enough space for the driver behind to overtake you safely. If your MMA (maximum authorised mass) exceeds 3,500 kg, this gap must be at least 50 m where this requirement applies. Your C1 lorry falls within this category because of its MMA. [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)
  • The same minimum applies to vehicles and vehicle combinations with an overall length exceeding 10 m. You must understand that these are alternative criteria: a short lorry with an MMA exceeding 3,500 kg does not also need to exceed 10 m to be included; a long vehicle may be included because of its length. [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)
  • You must maintain both the margin needed to avoid a rear-end collision and the applicable minimum of 50 m. If you need more than 50 m to brake without a collision, you must increase the gap. [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)

21Exceptions to the additional gap

A green light truck travels along a town street and keeps a clear gap behind the orange car ahead.
The key idea

Even when exempt from the additional gap, keep enough space to avoid hitting vehicles ahead.

50 mAdditional gap with exceptions
Case for your lorryAdditional 50 m gap
Within built-up areasNot required
Where overtaking is prohibitedNot required
More than one lane in your directionNot required
Traffic too congested for overtakingNot required
You signal an intention to overtakeKeep the basic gap needed to avoid collisions

Remember

  • Within built-up areas, you do not need this additional gap.
  • It is not required where overtaking is prohibited.
  • It is not required with several lanes in your direction.
  • It is not required when traffic is too congested to overtake.
  • When signalling to overtake, keep enough space to react and brake safely.

Exam trap: Wrong: an exception removes every safety gap. Right: it removes only the additional gap; keep your basic safety margin and any other applicable minimum.

Read the full explanation
  • In built-up areas, you are exempt from the additional 50 m gap intended to make overtaking easier. You must maintain the margin needed to avoid rear-end collisions and any other specific minimum distances that apply. [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)
  • This additional obligation also does not apply where overtaking is prohibited or where there is more than one lane in your direction. You must count the lanes in your direction: having one lane in your direction and another in the opposite direction does not mean you have two lanes for your direction of travel. [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)
  • When traffic is so congested that overtaking is impossible, you are exempt from the additional 50 m gap. You must maintain the basic safety margin. [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)
  • When you signal your intention to overtake, you must maintain the distance needed to react and brake without a collision; the exception to the additional distance only concerns the space intended to allow others to overtake you. [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)

22Tunnels: 150 metres or six seconds

A light truck travels in the right lane of a tunnel, keeping a large gap behind the car ahead.
The key idea

In tunnels, without intending to overtake, leave at least 150 m or six seconds.

150 mYour lorry’s minimum gap
six secondsAlternative minimum time gap
3,500 kgMaximum authorised mass threshold

Remember

  • Apply this in tunnels and underpasses with maximum authorised mass above 3,500 kg.
  • Without intending to overtake, respect the minimum distance or time gap.
  • Count from the vehicle ahead passing a fixed point until your front reaches it.
  • With only one lane in your direction, you cannot overtake.
  • With several lanes, overtake without entering oncoming lanes and keep a safe gap.

Exam trap: Wrong: you choose 100 m or four seconds for your lorry above 3,500 kg maximum authorised mass. Right: without intending to overtake, leave 150 m or six seconds; do not automatically add another 50 m.

Read the full explanation
  • In tunnels and underpasses, if you do not intend to overtake, you must keep at least 150 m or a minimum time gap of six seconds behind the vehicle ahead when driving your lorry with an MMA exceeding 3,500 kg. [RGC, art. 95](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a95)
  • To check a time gap, you can choose a fixed point and count from when the vehicle ahead goes past it until the front of your lorry reaches it. At 90 km/h, six seconds is mathematically equivalent to 150 m; at a different speed the equivalent distance changes, although the time gap remains six seconds. [RGC, art. 95](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a95)
  • In a tunnel with only one lane in your direction, you must not overtake, so you must maintain the applicable minimum gap when following another vehicle. With several lanes in your direction, the possibility of overtaking without entering the opposite direction does not remove your obligation to keep the distance needed to brake without a collision while preparing the manoeuvre. [RGC, art. 87](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a87) [RGC, art. 95](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a95) [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)

23Speed and traffic queues inside tunnels

A light truck is stopped inside a tunnel with its hazard lights on and a large gap to the car ahead in the same right-hand lane.
The key idea

Inside tunnels, adjust your speed and obey signs and instructions.

Remember

  • A tunnel alone does not set a single maximum speed.
  • Combine the road limit, your lorry’s limit and signs.
  • You must be able to stop within the space you can see.
  • If the entrance traffic light forbids entry, stop before entering.
  • If a queue stops you, stop as far from the vehicle ahead as possible.

Exam trap: Wrong: a tunnel always has a single maximum speed. Right: combine road, lorry, signs, visibility and traffic.

Read the full explanation
  • A tunnel does not have a single maximum speed simply because it is a tunnel. You must take account of the road type, the speed limit for your lorry, specific signs, visibility and traffic conditions together. Artificial lighting does not remove your obligation to be able to stop within the distance you can see. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45) [RGC, art. 47](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a47) [RGC, art. 95](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a95)
  • You must obey the traffic lights, variable message signs and instructions you receive in the tunnel. If the traffic light at the entrance prohibits entry, you must stop before entering. [RGC, art. 95](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a95) [RGC, art. 96](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a96)
  • If a traffic queue brings you to a standstill inside a tunnel or underpass, you must stop as far as possible from the vehicle ahead; you study the full procedure in “Breakdowns, fires and traffic queues in tunnels”, in the “Accidents, breakdowns and first aid” module. [RGC, art. 97](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a97)

24Lateral clearance and slowing down when passing

A light truck overtakes a cyclist in the left lane of a carriageway with two lanes in the same direction, leaving ample lateral clearance in a rural setting.
The key idea

Leave enough space beside other road users and slow down when passing them.

1.5 mMinimum for specified overtaking cases
20 km/hMinimum speed reduction outside towns

Remember

  • Adjust your speed to the space available beside you.
  • Consider your lorry’s width and parts that stick out.
  • When overtaking vulnerable users, combine required clearance, lane use and speed reduction.
  • Check “Protect cyclists and other vulnerable road users” in “Manoeuvres with your lorry”.
  • For breakdowns, accidents or regulated services, leave enough clearance and reduce your speed.

Exam trap: Wrong: slowing down alone is enough when passing a vehicle stopped for a breakdown, accident or an emergency, assistance or maintenance service. Right: leave at least 1.5 m sideways, use the opposite lane if needed, and drive at least 20 km/h below the limit.

Read the full explanation
  • You must maintain sufficient lateral clearance when meeting oncoming road users or travelling alongside other road users, adapting your speed to the space available. You must take account of the width and projecting parts of your lorry: a large gap ahead does not compensate for going too close to a person, vehicle or obstacle at the side. [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45) [RGC, art. 46](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a46)
  • When overtaking vulnerable road users, you must combine the required lateral clearance, lane use and speed reduction; see “Protect cyclists and other vulnerable road users”, in the “Manoeuvres with your lorry” module, for the minimum clearance of 1.5 m and the requirement to drive at least 20 km/h below the limit outside built-up areas. [RGC, art. 85](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a85)
  • When going past vehicles immobilised by a breakdown, accident or the services specified in the regulations, you must reduce your speed and maintain the required lateral clearance; you study the conditions and figures in “Passing immobilised vehicles and obstacles”, in the “Manoeuvres with your lorry” module. [RGC, art. 88](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a88)

Choose your lorry’s speed

Check the road, vehicle, restrictions and circumstances in that order.

  1. Identify whether you are driving outside a built-up area, on an urban road, on a stretch of road through a town, or on an autopista (motorway) or autovía (dual carriageway) within a built-up area.
  2. Apply the lorry’s maximum speed and check for dangerous goods restrictions or other specific restrictions.
  3. Check signs, temporary traffic controls and applicable minimum speeds.
  4. Assess visibility, grip, traffic, load and your own condition.
  5. Slow down as much as you need to stop safely, even below the minimum speed if there is a justified reason.

Work out which distance you are studying

Distinguish reaction distance from braking distance and add them together for stopping distance.

  1. Identify the moment when you perceive the hazard.
  2. Measure the distance travelled before you apply the brake: reaction distance.
  3. Measure the distance from applying the brake until you come to a standstill: braking distance.
  4. Add both distances together: stopping distance.
  5. Check that you have enough visible, clear space to stop.

Choose your following distance

Combine basic safety with the minimum gaps for each situation.

  1. Leave enough space to stop without hitting the vehicle ahead if it brakes suddenly.
  2. In urban areas, leave at least 5 m when following cyclists in the same lane.
  3. Outside tunnels, check whether you must make it easier for others to overtake you and whether the 50 m minimum applies.
  4. Check the exceptions: built-up areas, overtaking prohibited, several lanes in your direction or congestion that prevents overtaking.
  5. In a tunnel or underpass, when you do not intend to overtake, leave 150 m or six seconds with your lorry whose MMA (maximum authorised mass) exceeds 3,500 kg.
  6. Increase the margin if grip, visibility or braking ability requires it.

Finished this module?

Mark it as read and you will see your progress on the theory list.

Next module