Theory · C+E Licence - Articulated Truck · Module 4 of 13

Safe coupling and uncoupling

You learn to couple and uncouple your lorry and its trailer or semi-trailer while keeping both vehicles immobilised, the coupling locked and the connections secured. You master the order for handling supports, safety locks and final checks so that you can recognise in the exam which actions prevent accidental separation or unexpected movement.

27 min read22 sectionsReviewed Nov 3, 2026
A driver wearing a reflective vest checks the connections of a green and orange articulated truck immobilised with a wheel chock in a yard.
Checking a secure coupling

1What you must secure when coupling

A driver observes the coupling of a stationary articulated truck, with red and yellow pneumatic hoses and a black electrical cable between the tractor unit and the semitrailer.
The key idea

Join your vehicles safely and check that their services work.

Combination typeHow you join it
Articulated vehicleThe fifth wheel holds the kingpin and supports the semi-trailer’s front end.
Road trainYour lorry pulls the trailer through its coupling.

Remember

  • Follow the manuals for your vehicles and coupling.
  • Check the mechanical link and service connections.

Exam trap: Wrong: always follow the same steps. Right: follow the procedure for your equipment.

Read the full explanation
  • Complete the mechanical coupling and ensure that the services work throughout the combination. On an articulated vehicle, the fifth wheel receives the semi-trailer's kingpin and supports its front end; on a road train, the lorry pulls the trailer through its coupling device. This module focuses on these two systems; ball coupling heads and their stabilisers are covered in B/B+E.
  • Follow the manufacturer's procedure for your towing vehicle, towed vehicle and coupling: the positions of levers, indicators, suspension and combined connections depend on the equipment.

2Compatibility before you approach

A driver inspects the pneumatic and electrical connections of a tractor unit beside a separate semitrailer resting on its landing legs, with the fifth wheel visible.
The key idea

Check that all your connecting parts are compatible.

Remember

  • Check mechanical, air and electrical connections.
  • Do not force parts or invent adapters.
  • Find the locking mechanism, safety lock, brakes and supports.
  • Check that the technical specifications allow you to join the vehicles.
  • Check any extra connections on your equipment too.

Exam trap: Wrong: parts that fit must be compatible. Right: check their compatibility and technical suitability.

Read the full explanation
  • Use compatible mechanical, pneumatic and electrical connections between the towing vehicle and the towed vehicle. The fact that a connector can be pushed in or that a drawbar comes close to the coupling does not establish compatibility; do not force connections or improvise adaptations. This requirement applies to all three types of connecting components. [RGV, art. 13.1](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a13).
  • Identify the type of locking mechanism, how to check it and the safety device that prevents it from opening unintentionally. Before reversing, also locate the towed vehicle's parking brake, supports and connection points.
  • Confirm that the combination is authorised on the basis of its components' technical specifications. A coupling that physically allows the vehicles to be joined may be unsuitable for that towed vehicle or for the forces it must withstand.
  • Identify any additional systems fitted to your combination, such as service connections for a specialised body. Before starting, make an inventory of everything that must be connected and everything that must be stowed.

3Location and working area

A person wearing a reflective vest observes from the side a tractor unit aligned with an uncoupled semitrailer whose landing feet rest on firm, level, clear hardstanding.
The key idea

Choose firm ground and keep your working area clear.

Remember

  • Choose stable ground that is as level as possible.
  • Check that the ground can support your semi-trailer’s landing feet.
  • Leave space to approach and pull away without hitting anything.
  • Keep people out from between vehicles whenever either vehicle can move.
  • Stop if you lose sight of your guide.
  • Check your surroundings before every movement.

Exam trap: Wrong: ground that supports wheels will support landing feet. Right: check the ground beneath the feet.

Read the full explanation
  • Choose a firm, stable surface that is as level as possible. Pay particular attention to where the semi-trailer's landing feet will rest: ground that supports the wheels may give way under a small support.
  • Allow enough space to align the towing vehicle, approach slowly and pull it away without striking the towed vehicle. Check for obstacles above, to the sides and below, and for the space the cab and its accessories will occupy.
  • Keep people out of the space between the vehicles while either vehicle can move. If someone helps you, agree on clear signals and a visible, safe position for the person guiding you. Stop if you lose sight of your guide.

4Immobilise the vehicles before leaving the cab

A driver operates the red parking brake control of a semitrailer coupled to a tractor unit, with orange wheel chocks securing the combination beside a kerb.
The key idea

Before leaving your cab, secure the towing vehicle and towed vehicle separately.

Your combination’s positionGear to leave engaged, with a gearboxSteered wheels when using a suitable kerb
Facing uphillFirst gearTowards the centre of the carriageway
Facing downhillReverse gearAway from the centre of the carriageway

Remember

  • Apply the parking brakes on both vehicles.
  • If fitted, pull the red parking brake button; check the vehicle cannot move.
  • When leaving your seat, stop the engine and switch off the ignition.
  • If you walk away, prevent anyone using your vehicle without permission.
  • On a significant slope, also use suitable chocks or a suitable kerb.
  • Before uncoupling, secure the towed vehicle so it cannot move independently.

Exam trap: Wrong: automatic braking when air is lost is enough. Right: also apply the towed vehicle’s own parking brake.

Read the full explanation
  • Before leaving the cab to work between the units, apply the parking brakes on both the towing vehicle and the towed vehicle. Secure each unit separately: when you uncouple, the kerb holding the towing vehicle does not hold the towed vehicle. On a semi-trailer with a red parking valve, pull the button to apply the spring brake and check that the vehicle is immobilised; identify the control from its plate and the manual. Automatic braking due to loss of air supply does not replace this action. [Kässbohrer, manual, § 3.1.5](https://kaessbohrer.com/uploads/2023/10/container-chassis-user-manual-es-2023-10-16-111223.pdf).
  • When you leave the driving position after stopping or parking, switch off the engine, switch off the ignition and leave the parking brake applied; if you walk away, prevent unauthorised use. Select first gear when facing uphill, reverse gear when facing downhill, or the appropriate parking position on the transmission. [RGC, art. 92.3.a-c](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a92).
  • On a significant slope, also secure your combination with suitable wheel chocks or rest a steered wheel against a suitable kerb. For the latter option, turn the wheels towards the centre of the carriageway when facing uphill and outwards when facing downhill. Do not use stones or improvised objects. [RGC, art. 92.3.d](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a92).

5Inspect the coupling components

A worker inspects a tractor unit’s fifth wheel with a flashlight beside a detached semitrailer resting on two landing legs.
The key idea

Check your coupling parts before joining the vehicles.

Coupling you checkParts you must recognise
Fifth wheelEntry throat, kingpin lock, handle and safety lock; semi-trailer kingpin and plate
Drawbar couplingTowing eye, coupling pin and its retaining mechanism

Remember

  • Look for missing parts, cracks, bent parts and unusual movement.
  • Check mountings and surfaces that touch.
  • Keep your hands out of the locking mechanism’s path.
  • Clean and lubricate your coupling as its manual instructs.

Exam trap: Wrong: ignore dirt in the lock. Right: remove dirt that prevents correct seating or locking.

Read the full explanation
  • Inspect the mountings, locking mechanisms and contact surfaces before joining them. Look for missing parts, deformation, cracks, abnormal play and dirt that prevents proper seating or locking.
  • On the fifth wheel, identify the entry throat, the mechanism that retains the kingpin, the release handle and its safety device. On the semi-trailer, inspect the kingpin and the plate that will rest on the fifth wheel.
  • On a drawbar coupling, check the towing eye, the coupling pin or bolt and its retaining device. Keep your hands out of the locking mechanism's path.
  • Keep the surfaces clean and apply the lubricant specified for your fifth wheel and coupling. Detailed maintenance is covered in «Maintenance and inspection of the vehicle combination».

6Align the tractor unit and semi-trailer

A green tractor unit is aligned with an orange semitrailer resting on its landing legs while a worker observes from the side before coupling.
The key idea

Align your tractor unit and adjust its height before completing the coupling.

Remember

  • Reverse very slowly, with the kingpin aligned with the entry throat.
  • Check height and position on foot when needed.
  • Adjust the height so the semi-trailer plate sits correctly.
  • When using air suspension, follow your manual and keep trapping areas clear.
  • Stop for unusual resistance, lost alignment or doubts about available space.

Exam trap: Wrong: push harder to correct the height. Right: stop and adjust the position for your equipment.

Read the full explanation
  • Approach with the tractor unit aligned with the semi-trailer so that the kingpin follows the entry throat of the fifth wheel. Use the mirrors and available reference points, but get out and check heights and positions on foot when necessary. [SAF-HOLLAND, FW35 manual, §§ 3 and 6-8](https://safholland.com/mx/es/servicio/centro-de-descargas/document/resource/environment/project1_p/documents/documentationP/Before%2520Empolis%2520Box%2520update/pLiterature/XL-FW10009UM_es-US.pdf).
  • Adjust the height to suit the equipment so that the semi-trailer's plate seats correctly on the fifth wheel and the kingpin enters at the height of the locking mechanism. If it is too high, the coupling may appear to be engaged when it is not.
  • If you use the air suspension to adjust the height, follow the vehicle's procedure and anticipate any change in support. Before operating a control, check that nobody is in an area where they could become trapped.
  • Reverse very slowly and stop if you encounter abnormal resistance, lose alignment or are unsure about the available space. Pushing harder does not replace correcting the height.

7Close and lock the fifth wheel

A driver wearing a high-visibility vest uses a flashlight to inspect the fifth-wheel lock and safety catch of an articulated truck secured with a wheel chock.
The key idea

Check your fifth-wheel lock directly and secure its safety lock.

Remember

  • Immobilise your tractor unit after the kingpin enters.
  • Check the lock around the kingpin and the plate’s seating.
  • Treat unusual gaps or positions as an incomplete coupling.
  • Check the safety lock against unintended opening.
  • Never replace the safety lock with wire or disable it.
  • Complete the manual’s checks even if you have an electronic indicator.

Exam trap: Wrong: trust only the cab indicator. Right: also check the lock and investigate visible faults.

Read the full explanation
  • Complete the entry of the kingpin into the mechanism according to the coupling instructions. Then immobilise the tractor unit and check directly that the retaining mechanism is in the specified closed position. [SAF-HOLLAND, FW35 manual, §§ 3 and 6-8](https://safholland.com/mx/es/servicio/centro-de-descargas/document/resource/environment/project1_p/documents/documentationP/Before%2520Empolis%2520Box%2520update/pLiterature/XL-FW10009UM_es-US.pdf).
  • Check that the semi-trailer plate sits properly on the fifth-wheel plate, as well as checking the locking mechanism around the kingpin. If you notice an abnormal gap, an uncertain jaw position or a handle that does not reach its proper position, treat the coupling as incomplete.
  • Secure the device that prevents unintended opening and check its position. The coupling must incorporate a component that prevents uncoupling. Do not replace a missing safety device with wire or keep it disabled to make the next uncoupling easier. [RGV, art. 13.3](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a13).
  • If you have an electronic coupling indicator or warning, interpret it according to the manual and complete the prescribed checks. A cab message does not justify ignoring a visible fault.

8Check mechanical retention

A driver at the left-hand steering wheel of a green tractor unit remains in the cab, with the orange semitrailer coupled, its wheels chocked and its landing legs lowered in a yard.
The key idea

Check that your coupling holds with a gentle tug test and inspection.

Remember

  • Carry out the gentle tug test specified by your manufacturer.
  • Keep the towed vehicle restrained and its supports positioned as the manual requires.
  • Keep people away from parts that could move.
  • Inspect the locking mechanism and safety lock too.
  • If the test fails, immobilise both vehicles again and keep the semi-trailer supported.
  • Check height, alignment and locking; do not drive off with doubts.

Exam trap: Wrong: test with a violent jerk. Right: use only the prescribed gentle test, with the specified precautions.

Read the full explanation
  • Carry out the gentle pull test prescribed by the manufacturer, keeping the towed vehicle restrained and the supports in the safe position specified for that test. The aim is to check that the coupling resists separation, not to move the combination or subject it to a violent jerk. [SAF-HOLLAND, FW35 manual, §§ 3 and 6-8](https://safholland.com/mx/es/servicio/centro-de-descargas/document/resource/environment/project1_p/documents/documentationP/Before%2520Empolis%2520Box%2520update/pLiterature/XL-FW10009UM_es-US.pdf).
  • Make sure nobody is between the vehicles or beside components that may move. Select the control and pulling force specified in the manual and stop if any unexpected movement occurs.
  • Supplement the mechanical test by inspecting the locking mechanism and safety device. Resistance may have another cause, and mere contact between surfaces does not prove that the coupling is locked.
  • If the check fails, keep the semi-trailer supported and review the alignment, height and locking mechanism according to the manual.

9Drawbar and towing-eye coupling

A truck and trailer stand in a yard, with the drawbar eye aligned in front of the truck coupling and supported by an adjustable mechanical stand, and the trailer wheels chocked.
The key idea

Align your towing eye and check that the coupling pin is fully secured.

Remember

  • Adjust your drawbar’s height using the system provided.
  • Never support a heavy drawbar with your body.
  • Prepare your coupling as instructed and approach slowly with your lorry.
  • Check the pin and the mechanism that holds it.
  • Connect services and retract the support once the secure coupling supports the drawbar.
  • Complete the specified retention checks.

Exam trap: Wrong: straighten the drawbar by pushing with the bodywork. Right: align it using the system provided.

Read the full explanation
  • On a trailer with a towing eye, align the drawbar with the mouth of the lorry coupling and set it to the correct height using the system provided. Avoid improvising a way to lift a heavy drawbar or supporting it with your body.
  • Prepare the automatic or manual coupling according to its design and move the lorry towards it slowly. Do not use the edge of the bodywork to push or straighten the drawbar.
  • After the towing eye enters, check that the pin is fully in its working position and securely retained. Observe the relevant locking indicator and check accessible components according to the manual.
  • Complete the connections and retract the drawbar support once the coupling is secure and can support the drawbar properly. Also carry out the retention checks specified for that coupling.

10Other coupling systems

A worker aligns the two halves of a grouped connection block between an articulated truck cab and its semitrailer, with the guides and operating lever visible.
The key idea

Check what your connector block operates and complete its movement as the manual requires.

Remember

  • Check the diagram to see which parts each control operates.
  • Check which operations you must complete separately.
  • If your block has guides and locks, align its halves as instructed.
  • Complete the movement specified by the manufacturer.
  • If it stops halfway or fails to lock, stop and resolve the cause.

Exam trap: Wrong: operating the block always locks the coupling. Right: check whether it connects only services or also operates the mechanical lock.

Read the full explanation
  • On equipment with a block that groups connections together, identify whether operating it only connects the services or also operates the mechanical locking mechanism. Consult the equipment diagram to identify which components each control operates and which operations you must complete separately.
  • If the block has its own guide and retaining mechanism, align its two halves in the specified orientation and complete its operating travel according to the manual. If it remains in an intermediate position or the locking mechanism does not reach the end of its travel, stop the operation and resolve the cause before continuing to couple.

11Identify the air connections

The red and yellow pneumatic hoses of an articulated truck are joined to their matching semitrailer coupling heads by locked claw couplings.
The key idea

Identify each air connection and follow the connection order for your equipment.

Connection in a conventional two-line air systemFunction you identify
RedAir supply or emergency line
YellowService brake control line

Remember

  • Check that seals are clean, undamaged and securely fitted.
  • With conventional separate connections, connect yellow before red.
  • If you have a combined connector block, follow its specific procedure.
  • After coupling and supplying air, check the black button: normally out; follow your manual.

Exam trap: Wrong: connect red first with conventional separate connections. Right: connect yellow first, then red.

Read the full explanation
  • In a conventional two-line pneumatic system, identify the red line as the supply or emergency line and the yellow line as the brake control line; connect each coupling head to its matching head. [BOE, Order of 26 June 1986, pneumatic connections, § 1.4](https://www.boe.es/eli/es/o/1986/06/26/%282%29/dof/spa/pdf).
  • Inspect the seals and contact surfaces before connecting: they must have no dirt or damage that prevents an airtight seal. Fit the coupling heads without forcing them and check that they are retained.
  • The black button on the towed vehicle is the brake release or shunting valve: it allows you to release the automatic braking to move the uncoupled vehicle using stored air. After coupling and supplying air to the circuit, check that it returns to the driving position specified by the manufacturer, normally pulled out. An incorrectly positioned control may keep the towed vehicle braked or allow its brakes to be released without an air supply from the tractor unit. You study the circuit in «Trailer and vehicle combination braking». [Kässbohrer, manual, § 3.1.5.1](https://kaessbohrer.com/uploads/2023/10/container-chassis-user-manual-es-2023-10-16-111223.pdf).
  • With conventional separate connections, connect the yellow control line first and then the red supply line. If your equipment uses a combined block, follow its specific procedure: grouping the connections changes how you operate them. [ROJO Trailer, manual, section 4: coupling](https://www.rojotrailer.com/wp-content/uploads/2022/05/Manual-banera-espanol-AluHARD-500-rev3.pdf).

12Electrical and service connections

A person wearing a reflective vest checks the illuminated rear lights of the semitrailer of an articulated lorry parked beside a kerb.
The key idea

Connect and check your lights, electronic braking and required services.

Remember

  • Check contacts, covers and catches.
  • Hold each connector by its body; never pull its cable.
  • Do not force a connection that is out of alignment.
  • Follow your manual for hydraulic circuits and other special services.
  • Check that the towed vehicle’s lights actually work.

Exam trap: Wrong: connecting lights also connects ABS or EBS. Right: check any fitted electronic braking connectors too.

Read the full explanation
  • Connect the towed vehicle’s lighting and signalling system and any electronic braking connectors fitted to the combination. Do not confuse the lighting socket with the ABS or EBS power supply and communication connection.
  • Check plugs, contacts, covers and latches, and hold the connector by its body when fitting or removing it. Do not pull on the cable or force a misaligned socket.
  • Connect any additional services the equipment needs for driving or operation and secure those that must remain stowed. If there are hydraulic lines or other special circuits, follow the manufacturer’s disconnection and pressure requirements.
  • After connecting, check the lighting during the final walk-round of the combination, operating the functions from the tractor unit and observing their response on the towed vehicle. A fitted plug confirms the physical connection, but does not by itself prove that the circuit works.

13Allow hose movement and secure the hoses

A worker observes three slack coiled lines between the cab and the coupled semi-trailer, suspended from a spring support and clear of the chassis and tyres.
The key idea

Secure your cables and hoses while allowing room for turns and suspension movement.

Remember

  • Check the whole route of your cables and hoses.
  • Prevent them dragging, rubbing against tyres or becoming trapped.
  • Secure spare length using the supports provided.

Exam trap: Wrong: pull hoses tight to stop them hanging down. Right: secure them while allowing movement.

Read the full explanation
  • Arrange the cables and hoses with enough slack for the expected turns and suspension movements. Check their routing between both ends, not just the area visible from one side.
  • Prevent the lines from dragging on the ground, rubbing against the tyres or becoming trapped between surfaces of the fifth wheel, chassis and towed vehicle. Secure any excess length using the fittings provided.
  • Use the supports and retainers provided for the equipment. An improvised fastening can concentrate strain on a cable or prevent a coiled line from extending as the combination articulates; keep the sections intended to accommodate that movement free.

14Breakaway cable and secondary coupling

A light trailer with an overrun brake is coupled to a car, with its breakaway cable attached to the brake mechanism and an anchorage point on the towing vehicle, hanging with slack above the ground.
The key idea

Check the safety system actually fitted to your towed vehicle.

1,500 kgSecondary coupling: conditional MMA limit
Device and vehicles it applies toFunction
Breakaway cable, if fittedActivates the intended braking system after accidental separation.
Secondary coupling: trailers with MMA up to 1,500 kg and no guaranteed braking after coupling breakageKeeps the drawbar off the ground and preserves some steering.

Remember

  • If you have a breakaway cable, attach it where the manufacturer specifies.
  • Allow turns without dragging the cable or applying the brake.
  • Check its attachment to the towed vehicle’s brake mechanism.
  • Never assume your heavy combination needs a chain used on another trailer.

Exam trap: Wrong: require this secondary coupling on every heavy semi-trailer. Right: this requirement covers trailers with MMA up to 1,500 kg without a system ensuring braking if the coupling breaks.

Read the full explanation
  • If your towed vehicle has a breakaway cable, attach it to the point specified by its manufacturer and check its routing. Its function is to activate the braking system designed for accidental separation.
  • Allow enough freedom of movement for articulation without the cable dragging, snagging or applying the brake during a normal turn. Also check its attachment to the towed vehicle's mechanism.
  • Identify the secondary coupling required on trailers with an MMA (maximum authorised mass) not exceeding 1,500 kg that have no system to ensure braking if the coupling breaks. It must prevent the drawbar from touching the ground and retain some residual steering control. A safety chain is not equivalent to automatic brake application. [RGV, art. 13.4](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a13).
  • On a heavy vehicle combination, check the safety system actually fitted, without assuming it has a chain or cable used on another trailer. Automatic braking devices must ensure that the vehicle stops if uncoupling or breakage occurs while driving. [RGV, art. 12.8.3](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a12).

15Landing legs and jockey wheel

A driver checks the retracted landing legs and secured crank handle of a semitrailer coupled to a tractor unit in a paved yard.
The key idea

Retract your supports only when the coupling is secure and supports the towed vehicle.

Remember

  • Fully retract the landing legs and check their mechanisms on both sides.
  • Stow and secure the winding handle.
  • If you have a jockey wheel, raise it and lock its mounting.

Exam trap: Wrong: drive with landing legs partly lowered. Right: retract them fully and check they stay secured.

Read the full explanation
  • Fully retract the semi-trailer's landing legs once the coupling is secure and correctly supports the front of the semi-trailer. Check both sides, ground clearance and the securing mechanisms. [SAF-HOLLAND, FW35 manual, §§ 3 and 6-8](https://safholland.com/mx/es/servicio/centro-de-descargas/document/resource/environment/project1_p/documents/documentationP/Before%2520Empolis%2520Box%2520update/pLiterature/XL-FW10009UM_es-US.pdf).
  • Stow the crank handle and secure it in its holder. A loose handle or a partially extended leg can strike an obstacle during a turn or a change in gradient.
  • If your trailer has a drawbar jockey wheel, raise it, stow it and lock its mounting as specified for the model. Check that vibration cannot cause it to drop or come loose.

16Final walk-round of the combination

A person wearing a reflective vest checks the rear lights of a stationary articulated truck, with the wheel chocks stored in a side rack.
The key idea

Before moving off, walk around your combination and check lights, connections and chocks.

Remember

  • Look for trapped cables, forgotten tools and obstacles to turning.
  • Check every lighting function on your towed vehicle.
  • Use help or safe checking equipment.
  • Remove chocks when you can keep the combination safe without them.
  • Stow your chocks; never leave them on the road or drive over them.

Exam trap: Wrong: leave chocks beside the wheels when moving off. Right: remove them from the road and stow them.

Read the full explanation
  • Once coupling is complete, walk round the combination from safe positions to check for trapped cables, tools left behind and obstructions to articulation.
  • Check the towed vehicle's lighting by operating the relevant functions: position lights, indicators, hazard warning lights, brake lights and all other lights fitted. Use assistance or the available checking equipment without leaving the vehicle unattended while it is moving.
  • Remove the wheel chocks when the combination is ready to move off and you can keep it secure without them; stow them in their proper place. You must remove any chocks used from the road when you resume driving. [RGC, art. 92.3.d](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a92).

17Pressure and testing before moving off

An articulated truck with a green cab and orange semitrailer performs a brake test in a clear yard, with the driver on the left side of the cab.
The key idea

Wait for the correct air pressure and test your brakes before moving off.

Remember

  • Check your manual for the required air pressure conditions.
  • Check warnings and look for leaks using the specified methods.
  • Never put your hands into mechanisms to search for leaks.
  • Release the red parking brake when the combination is ready and pressure correct.
  • Test brakes very slowly, with chocks removed and supports retracted.
  • Stop safely and check unusual knocks, warnings or movement.

Exam trap: Wrong: memorise a pressure that suits every lorry. Right: follow your equipment manufacturer’s requirements.

Read the full explanation
  • Wait until the air system reaches the operating conditions specified by the manufacturer and check the pressure and braking warnings. Do not memorise a single pressure value for every lorry.
  • Check for leaks using the specified methods, paying attention to leaks at the connections you have just made. Do not search for a leak by putting your hands into mechanisms that may operate.
  • Carry out a functional brake test at very low speed in a safe area, once you have retracted the supports and removed the wheel chocks in accordance with the procedure. Check that the combination responds normally and stop if you feel jerking or notice any abnormalities. Release the towed vehicle's own parking brake using the red control once the combination is ready and the pressure is correct, following the towed vehicle's manual.
  • Move off gently and observe the behaviour of the towed vehicle and the connections. If you notice an abnormal knock at the coupling, a warning or an unexpected movement, stop safely and check.

18Prepare to uncouple

A worker checks the landing legs of a semitrailer still coupled to its tractor unit, with wheel chocks in place on firm, level pavement.
The key idea

Before uncoupling, prepare your location, supports and connections.

Remember

  • Choose firm ground where it can stand alone and be coupled again.
  • Leave your vehicles aligned, without unnecessary strain.
  • Do not operate the black brake release button.
  • Lower supports and adjust height without causing drops or overloading the legs.
  • Plan where to stow connections before opening the lock.

Exam trap: Wrong: operate the black button during separation. Right: leave it unoperated; it releases automatic braking.

Read the full explanation
  • Choose the uncoupling location with the towed vehicle's position when left on its own and subsequent recoupling in mind. Avoid placing supports on edges, unstable covers or surfaces that may give way.
  • Keep the combination aligned and avoid unnecessary strain on the coupling. Do not operate the black brake-release button during separation: this control allows you to release the automatic braking to manoeuvre the uncoupled towed vehicle.
  • Lower the semi-trailer's landing legs or the drawbar support and check that they are firmly seated. Adjust the height so that separation can take place without dropping, dragging or overloading the legs.
  • Plan where to stow each connector and hose when you disconnect them. Set aside holders that protect the connector heads from water and dirt and allow you to remove them without stretching the lines or resting them on moving parts.

19Disconnect before pulling the towing vehicle away

A worker stows the connections of an articulated lorry with the red and yellow hoses stored and the semitrailer resting on its landing legs and secured with wheel chocks.
The key idea

Disconnect and stow your service connections following your equipment’s procedure.

Remember

  • Follow your equipment’s specific procedure.
  • With conventional separate air connections, disconnect red before yellow.
  • Release electrical catches and hold connectors by their bodies.
  • Protect connectors and stow them clear of the ground and wheels.
  • Check extra connections too.
  • Secure your towed vehicle before detaching safety connections at the specified stage.

Exam trap: Wrong: leave connectors on the ground or wheel arch. Right: stow them in the holders provided.

Read the full explanation
  • Disconnect the services according to the equipment procedure. With conventional separate air coupling heads, disconnect the red supply line first and then the yellow control line. [ROJO Trailer, manual, section 4: coupling](https://www.rojotrailer.com/wp-content/uploads/2022/05/Manual-banera-espanol-AluHARD-500-rev3.pdf).
  • Disconnect the electrical and electronic braking plugs by releasing their retaining devices and holding the plug bodies. Fit caps and guards where applicable.
  • Stow the ends in their designated holders, without leaving them on the ground or on the wheel arch. Also check any additional equipment connections.
  • On systems with a breakaway cable or secondary coupling, release them at the stage specified for uncoupling, after securing the towed vehicle. Stow them so that they do not drag.

20Open the locking mechanism and separate under control

A driver operates the fifth-wheel release handle from beside a stationary articulated lorry, with the semitrailer resting on its landing legs, its wheels chocked and its hoses disconnected.
The key idea

Open your coupling only with the towed vehicle secured, then pull away slowly.

Remember

  • Immobilise, support and disconnect your towed vehicle before opening the lock.
  • Operate the handle from the specified safe position.
  • If it will not open, secure both vehicles and investigate.
  • Never strike it, force it or disable the safety lock.
  • Move forward slowly and check supports when the procedure requires.
  • With a towing eye, check the coupling is free before pulling away.

Exam trap: Wrong: open before securing the supports. Right: open with the towed vehicle immobilised, supported and disconnected as instructed.

Read the full explanation
  • Once you complete the preparations in the previous sections, release the safety lock and open the fifth-wheel locking mechanism. Operate the lever from the safe position specified by the manufacturer, clear of the path of moving parts. [SAF-HOLLAND, FW35 manual, §§ 3 and 6-8](https://safholland.com/mx/es/servicio/centro-de-descargas/document/resource/environment/project1_p/documents/documentationP/Before%2520Empolis%2520Box%2520update/pLiterature/XL-FW10009UM_es-US.pdf).
  • If the locking mechanism does not open, investigate the cause with both vehicles secured. There may be tension in the coupling or a fault in the mechanism; do not hit it, force it or keep the safety lock disabled as a solution. [SAF-HOLLAND, FW35 manual, §§ 3 and 6-8](https://safholland.com/mx/es/servicio/centro-de-descargas/document/resource/environment/project1_p/documents/documentationP/Before%2520Empolis%2520Box%2520update/pLiterature/XL-FW10009UM_es-US.pdf).
  • Move forwards slowly and, where the procedure requires it, stop with the chassis still in a protective position to check that the supports carry the semi-trailer correctly. Watch for the feet sinking or shifting. [SAF-HOLLAND, FW35 manual, §§ 3 and 6-8](https://safholland.com/mx/es/servicio/centro-de-descargas/document/resource/environment/project1_p/documents/documentationP/Before%2520Empolis%2520Box%2520update/pLiterature/XL-FW10009UM_es-US.pdf).
  • With a towing-eye coupling, release the pin according to its manual and confirm that the coupling is free before moving the lorry away.

21Check the uncoupled towed vehicle

A driver checks the landing legs of an uncoupled, wheel-chocked semitrailer in a paved yard, beside the separate tractor unit with its hoses stowed.
The key idea

Finally, check your towed vehicle’s stability and prepare your towing vehicle to travel alone.

Remember

  • Check your towed vehicle’s tilt and how its supports rest on the ground.
  • Look for sinking feet or movement of the towed vehicle.
  • Protect connectors and stow the drawbar, cables and chains without creating obstacles.
  • Keep controls needed for coupling again accessible.
  • Check that your towing vehicle’s lines do not hang down.
  • Set your coupling as the manual requires for driving without a towed vehicle.

Exam trap: Wrong: leave your towed vehicle unattended with a sinking foot. Right: correct its position first.

Read the full explanation
  • After separating the vehicles, check the angle of the towed vehicle and how its supports rest on the ground. A sinking foot, a tilting leg or any movement indicates that you need to correct its parking position before leaving it unattended.
  • Check that the connectors are protected and that the drawbar, breakaway cable and chains are stowed without creating obstacles. Keep the controls you need for recoupling accessible.
  • Before driving off with the towing vehicle alone, check its stowed lines and accessories. Make sure that no coiled line hangs down and that the coupling is in the specified position for driving without a towed vehicle.

22Exam manoeuvre M

Elevated oblique view of a detached tractor unit beside and outside the longitudinal line of an orange semitrailer immobilised with wheel chocks and resting on its two landing legs.
The key idea

In manoeuvre M, prepare your towed vehicle and reverse from the required distance.

10 mMinimum distance in front
OnceLeave cab during reversing approach

Remember

  • Leave your towed vehicle immobilised and your semi-trailer on its supports.
  • Position your towing vehicle alongside, out of alignment.
  • Then position it in front, at least 10 metres away.
  • Complete the coupling and safety connections.
  • Retract supports and stow any chocks used.
  • During the reversing approach, you may get out once to check the coupling.

Exam trap: Wrong: get out several times during the exam’s reversing approach. Right: you may get out once to check the coupling and manually guide the drawbar if it is not automatic.

Read the full explanation
  • In exam manoeuvre M, leave the towed vehicle immobilised and the semi-trailer resting on its supports; position the towing vehicle alongside, out of line. Then position it in front at a distance of at least 10 metres to couple in reverse. [RGCond (General Driver Regulations), Annex VI, manoeuvre M](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#anvi).
  • Complete the coupling and safety connections, retract the supports and stow any wheel chocks you use. Annex VI allows you to leave the cab once during the reversing approach to check the coupling and manually guide the drawbar if the coupling is not automatic. These conditions describe the exam manoeuvre. [RGCond, Annex VI, manoeuvre M](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#anvi).

Coupling a semi-trailer with a fifth wheel

Reference sequence for conventional equipment; follow the manufacturer's detailed instructions.

  1. Choose firm ground, clear the surrounding area and immobilise the semi-trailer using its red parking brake control and any necessary wheel chocks.
  2. Inspect the kingpin and fifth wheel; prepare the locking mechanism and check height and alignment.
  3. Reverse slowly until coupling is complete and immobilise the tractor unit before leaving the cab.
  4. Check seating, kingpin retention, the locking mechanism and safety lock; carry out the prescribed gentle test.
  5. Connect the electrics and services; with separate air lines, connect yellow first, then red. Check that the black brake release valve is in the driving position specified in its manual.
  6. Fully raise the landing legs and stow the winding handle; check the routing and securing of the lines.
  7. Check lights, pressure and warnings; carry out the final walk-round, and remove and stow the wheel chocks when appropriate.
  8. With the correct pressure and the combination ready, release the red parking brake control as instructed in the manual; test the brakes at very low speed in a safe place and move off smoothly.

Coupling a trailer with a drawbar and towing eye

Secure the locking mechanism before retracting the trailer support.

  1. Immobilise both vehicles and check compatibility, components and the working area.
  2. Align the drawbar and adjust its height using the equipment provided.
  3. Couple the towing eye to the coupling pin as specified for the device.
  4. Check the locking mechanism, retention, safety lock and indicators, and carry out the prescribed mechanical check.
  5. Connect the services and attach the breakaway cable or secondary coupling fitted to the trailer.
  6. Retract and lock the drawbar support and check that nothing drags on the ground.
  7. Check lights, brakes and connections; stow the wheel chocks when appropriate and test the combination in a safe place.

Uncoupling without losing support or immobilisation

The towed vehicle must be supported and remain stationary before you release the coupling.

  1. Choose load-bearing ground, align the combination and secure the towing and towed vehicles separately.
  2. Apply the towed vehicle's own parking brake using the red button and use any necessary wheel chocks; leave the black brake release control untouched.
  3. Lower the landing legs or drawbar support and check that they can support the vehicle during separation.
  4. Disconnect and stow the services as specified for the equipment; with conventional air lines, disconnect red before yellow.
  5. Disconnect the breakaway cable or secondary coupling where applicable and confirm that no lines remain connected.
  6. Release the safety lock and open the mechanical locking mechanism following the manual.
  7. Separate slowly; check the support as you pull away, following the procedure.
  8. Confirm stability, brake application, protected connectors and stowed accessories on both vehicles.

Finished this module?

Mark it as read and you will see your progress on the theory list.

Next module