Theory · C+E Licence - Articulated Truck · Module 5 of 13

Trailer and vehicle combination braking

You learn to distinguish trailer braking systems, their limits and the functions of air connections and safety devices. You understand how combination braking relates to ABS, jackknifing and long descents, so you can answer the specific C+E questions without confusing one function with another.

30 min read25 sectionsReviewed Nov 3, 2026
An articulated truck with a green cab, orange semitrailer and red and yellow pneumatic connections descends in the right lane of a road through dry hills.
Braking and control of the articulated combination

1Braking requires control of the whole combination

A green tractor unit with an orange semitrailer travels aligned in its right-hand lane with its brake lights illuminated on a rural road.
The key idea

When braking, you must control the towing vehicle and trailer together.

Remember

  • Slow down without losing your path.
  • Check how the trailer brakes too.
  • Adapt your driving to the load and road conditions.
  • A faulty connection can weaken braking.

Exam trap: Wrong: braking hard is enough. Right: you must brake while keeping the whole combination under control.

Read the full explanation
  • When you brake a lorry with a trailer or a tractor unit with a semi-trailer, you must slow down two vehicles joined by an articulated coupling. Your aim is to stop them while keeping them on course: braking that causes the towed vehicle to swing across compromises control even if the wheels are braking very hard.
  • You must understand the braking system as a chain of components: you give the command through a control, a transmission system carries it to the brakes, and these produce the force that slows the rotation of the wheels. A faulty connection can affect the result as much as a fault in the brake itself. [RGV, Annex VIII, section 1.1](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anviii).
  • The combination's response depends on its systems working together: the tractor unit and the towed vehicle must provide the intended braking force without losing stability. You must assess the braking of both units; the slowing effect you feel from the cab can hide the fact that the trailer is pushing because its brakes are faulty.
  • You must adapt your driving to the combination you are actually driving, its load and the road conditions. Having driven another lorry with a different response does not prove that this one can stop in the same distance. Check how the towed vehicle behaves as well as what you feel from the cab.

2Service, secondary and parking braking

An articulated lorry with a green cab and orange semitrailer is parked facing uphill beside the right-hand kerb, with a wheel chock behind a semitrailer wheel and the driver outside the cab on the pavement.
The key idea

You must distinguish service, secondary and parking braking.

Braking functionWhen you use it
ServiceTo control movement and stop
SecondaryTo stop if service braking fails
ParkingTo stay still, even on a slope without a driver

Remember

  • Adjust service braking force to what you need.
  • Secondary braking must also let you adjust braking force.
  • Apply the parking brake before leaving your seat.
  • Secure the trailer before separating it.
  • Use the manual to identify the controls.

Exam trap: Wrong: every braking function needs a completely separate circuit. Right: some functions can share components.

Read the full explanation
  • You must be able to use the service brake to control the vehicle's movement and stop it safely, whether laden or unladen and whether travelling uphill or downhill. You must be able to vary its braking force: you normally use the amount needed for the situation rather than applying its full capacity at once. [RGV, Annex VIII, section 1.2.1](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anviii).
  • Secondary braking allows you to stop the vehicle within a reasonable distance if the service braking fails, and you must also be able to vary its braking force. You must not simply associate it with a particular lever, because the way this function is provided depends on the vehicle's installation. [RGV, Annex VIII, section 1.2.2](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anviii).
  • The parking brake must keep the vehicle stationary on a slope even without a driver, with its active components held in place by mechanical action. Keeping the pedal pressed does not replace this function when you leave the driving position. Before uncoupling the trailer from the towing vehicle, check that the trailer is secured independently. [RGV, Annex VIII, section 1.2.3](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anviii).
  • In a pneumatic installation, several functions may share components and energy reserves. The circuits and their protective devices depend on the design. Consult the manual for the controls and warnings for each function, especially when you couple a towed vehicle with a different installation.

3The limit for an unbraked trailer

A green goods truck tows a small empty orange single-axle trailer, with the coupling visible, along the right-hand lane of a rural road.
The key idea

For non-agricultural goods combinations, you must respect the unbraked trailer limit.

750 kgAbsolute unbraked limit
75 kgAddition when calculating the limit

Remember

  • Never exceed 750 kg unbraked in non-agricultural goods combinations.
  • Check the limit: half the towing vehicle’s unladen mass increased by 75 kg.
  • Respect the towing vehicle’s and coupling’s technical limits too.
  • Your documents may allow less mass.
  • Do not disable brakes fitted to a light trailer.
  • Do not apply agricultural exceptions to ordinary goods trailers.

Exam trap: Wrong: a heavy lorry allows more than 750 kg unbraked. Right: for non-agricultural goods combinations, this ceiling and all other limits still apply.

Read the full explanation
  • In a non-agricultural goods vehicle combination, you cannot justify using an unbraked trailer over 750 kg on the grounds that the lorry is very heavy. This is the absolute limit for unbraked towable mass in Annex IX; you must also comply with the technical towing capacity and coupling capacity. [RGV, Annex IX, sections 4.1.1 and 4.1.2.1](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anix).
  • You must also check the relationship with the towing vehicle's unladen mass: Annex IX sets the limit at half its unladen mass increased by 75 kg, without exceeding 750 kg. For your heavy lorry, the 750 kg ceiling is decisive, but the documentation may impose a lower capacity. [RGV, Annex IX, section 4.1.2.1](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anix).
  • Category O1 trailers may have no service brake; if they have one, its installation must meet the requirements for O2. A light trailer's brakes must not be faulty, and you must not disable any brakes fitted to it. [UN Regulation No. 13, section 5.2.2.1](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).
  • The towed vehicles covered by C+E exceed 750 kg and need a service brake. The limits and exceptions depend on the vehicle's technical category: the conditions for agricultural trailers belong to a different classification and do not allow an ordinary goods trailer to travel without brakes. [RGV, Annex VIII, section 2](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anviii).

4How overrun brakes work

A truck towing a small centre-axle trailer travels to the right with its brake lights illuminated and the coupling’s overrun mechanism compressed.
The key idea

Overrun braking works when your trailer pushes towards the coupling as you slow down.

3,500 kgLimit with overrun braking alone
1.5MMA multiplier: off-road towing vehicle
Towing vehicle: overrun braking aloneMaximum towable mass
GeneralTowing vehicle’s MMA, never above 3,500 kg
Off-road1.5 times the towing vehicle’s MMA, never above 3,500 kg

Remember

  • As you slow down, the trailer moves closer to the towing vehicle.
  • This push compresses the coupling mechanism and applies the brakes.
  • Braking releases when the push stops and the towing vehicle pulls forward.
  • Do not choose overrun braking alone for a heavy semi-trailer.
  • For O2, overrun braking is allowed on centre-axle trailers.

Exam trap: Wrong: overrun braking needs the trailer to separate. Right: it works as the trailer moves towards the towing vehicle when you slow down.

Read the full explanation
  • An overrun brake uses the trailer's movement towards the towing vehicle when the latter slows down. The pushing force compresses the coupling device and the actuation is transmitted to the trailer's brakes. You must associate it with this relative movement, rather than with a pneumatic command sent by the pedal. [RGV, Annex VIII, section 1.6](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anviii).
  • When the pushing force ceases and the towing vehicle pulls the combination again, the mechanism returns towards its rest position and the overrun braking is released. Its operation depends on the relative movement between the towing vehicle and the trailer during deceleration; the coupling remains connected during this normal operation.
  • With overrun braking alone, the towable mass must not exceed the towing vehicle's MMA (maximum authorised mass) or 3,500 kg. The exception for an off-road towing vehicle increases the ratio to 1.5 times its MMA, while retaining the 3,500 kg ceiling; do not apply it to any lorry simply because of its appearance. [RGV, Annex IX, section 4.1.2.2](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anix).
  • Under the type-approval requirements of UN Regulation No. 13, overrun braking for O2 is permitted for centre-axle trailers. You must not choose it as a sufficient system for a tractor unit's heavy semi-trailer; the braking capability required belongs to a different category. [UN Regulation No. 13, sections 5.2.2.2 and 5.2.2.3](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).

5Practical limits of overrun braking

A green rigid truck with an orange trailer and a visible overrun coupling travels downhill to the right in its lane on a hillside road.
The key idea

You must check the overrun mechanism and avoid overworking its brakes.

Trailer deviceWhen it acts
Overrun brakeWhen the trailer moves towards the towing vehicle while driving
Breakaway device, if fittedWhen the coupling separates

Remember

  • Check that the mechanism moves and transmits force correctly.
  • Fix sticking parts and poor adjustment before driving.
  • Follow the manufacturer’s instructions when reversing.
  • Do not improvise locks that disable the brake.
  • Start long descents slowly and use the towing vehicle’s braking effect.

Exam trap: Wrong: a simple system withstands any heat. Right: on long descents, continued pushing can overwork the trailer brakes.

Read the full explanation
  • If you tow a trailer with overrun braking, check that the mechanism can move and transmit force correctly. A coupling head that jams or an incorrectly adjusted transmission mechanism can cause the trailer to brake late or unevenly, or leave its brakes applied. You must correct these defects before driving.
  • When you reverse, the trailer can also compress the device. Use the reversing operation provided by the manufacturer and follow its instructions; do not improvise locking devices to disable the brake. A solution that makes a manoeuvre easier but leaves the trailer without braking while travelling compromises safety.
  • On a sustained descent, the pushing force on the coupling can continue and increase the work done by the trailer's brakes. You must enter the descent slowly, make proper use of the towing vehicle's engine braking and monitor the combination's behaviour. Do not confuse the system's mechanical simplicity with unlimited resistance to heat.
  • You must distinguish normal overrun actuation from any breakaway device fitted to the trailer. The first responds to the vehicles moving closer together while driving; the second must apply braking if the coupling separates. The fact that both use mechanical components does not make them the same function.

6Continuous and semi-continuous braking

An articulated lorry travels to the right with the driver on the left side of the cab, the passenger seat empty, and the tractor and semitrailer brakes connected and highlighted in orange.
The key idea

You distinguish continuous and semi-continuous braking by their energy sources.

1.5MMA multiplier: N2/N3, continuous braking
SystemEnergy sources
ContinuousA shared source
Semi-continuousTwo independent sources

Remember

  • Both systems let you adjust braking through a single control.
  • Both coordinate the towing vehicle’s and trailer’s braking.
  • Type-approval rules require continuous or semi-continuous service braking for O3 and O4 trailers.
  • With N2 or N3 towing vehicles and continuous braking, respect the stated ratio.
  • Respect technical limits and combination limits too.

Exam trap: Wrong: continuous braking means keeping the pedal pressed. Right: it means a system with a single control and a shared energy source.

Read the full explanation
  • With continuous braking, you use a single control progressively from the driving seat, and the combination's braking energy comes from a common source. The installation coordinates braking on its vehicles, simultaneously or with the appropriate time lag, whatever their relative positions. [RGV, Annex VIII, section 1.3](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anviii).
  • With semi-continuous braking, you use a single control progressively from the driving seat, but the energy comes from two independent sources. The installation coordinates braking on the vehicles, simultaneously or with the appropriate time lag, whatever their relative positions. [RGV, Annex VIII, section 1.4](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anviii).
  • O3 and O4 trailers must have continuous or semi-continuous service braking under the type-approval requirements. Very powerful brakes on the lorry are not enough: the system must also act on the towed vehicle and coordinate both parts of the combination. [UN Regulation No. 13, section 5.2.2.3](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).
  • To tow a trailer with continuous braking using an N2 or N3 towing vehicle, Annex IX sets a maximum ratio of 1.5 times the towing vehicle's MMA. You must also comply with the technical limits and the combination's limits; this ratio does not authorise any mass or replace the documentation. [RGV, Annex IX, sections 4.1.1 and 4.1.2.3](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anix).

7Compressed air transmits energy

A parked articulated truck shows the compressor, air reservoirs and pipes connected to the brake actuators, with the driver on the far side in the left of the cab.
The key idea

You need enough compressed air and a working system to brake safely.

Remember

  • The compressor produces air; reservoirs store it.
  • Valves let this air operate the brakes.
  • Before moving off, check the pressure specified by the manufacturer.
  • Check warnings and trailer connections.
  • If a leak compromises braking, secure the vehicle and arrange repairs.
  • Plan your braking early, even when the pedal needs little effort.

Exam trap: Wrong: every combination needs the same pressure. Right: check the operating pressure for your system.

Read the full explanation
  • In a typical heavy vehicle combination, the compressor produces compressed air, which is stored in reservoirs. When you request braking, the valves allow this energy to be used in the wheel actuators. You must distinguish between producing and storing air and commanding braking: these are related but different tasks. [DGT, Mechanics Manual, pneumatic system](https://sede.dgt.gob.es/export/sites/dgt/.galleries/permisos-de-conducir/certificacion-aptitud-profesores-formacion-vial/2020/Manual-VIII-Mecanica-2020.pdf).
  • Before moving off, you must have the operating pressure specified by the manufacturer and check the system warnings. Do not memorise a universal pressure in bars for all combinations: the ranges and thresholds depend on the system and its instruments.
  • Compressed air makes it easier to apply large braking forces without requiring equivalent muscular effort on the pedal. This does not guarantee grip or prevent discs and drums from heating up. You must still anticipate braking, even if you find that the pedal requires little effort to reduce speed.
  • Air leaks reduce the available reserve. Do not try to compensate for a leak by driving with the engine revving, or assume that the pressure in the towing vehicle alone confirms the condition of the trailer. Check the connections and, if the fault compromises braking, immobilise the combination and arrange repairs.

8Red supplies and yellow controls

A parked articulated truck shows the red pneumatic connection connected to the semitrailer’s air reservoir and the yellow connection connected to the brake control valve.
The key idea

In the usual pneumatic connection, you must distinguish red supply from yellow control.

Usual pneumatic linePurpose
Red: supplySupplies air to the trailer and charges its reservoirs
Yellow: control or serviceCarries the braking demand

Remember

  • Identify the connections before using them.
  • Red charges the trailer’s air reservoirs.
  • Yellow carries the service braking demand.
  • The trailer uses its stored air to brake.

Exam trap: Wrong: yellow supplies the reservoirs. Right: red supplies air and yellow carries the service braking command.

Read the full explanation
  • With the usual two-line pneumatic connection, you must identify the red line as the supply line and the yellow line as the control or service line. The manufacturer codes the coupling heads to prevent them from being interchanged. These are brake connections, not traffic sign codes. [MAN, trailer connections](https://www.man.eu/content/dam/man/countries/doc/spain/campagnas/Catlogo-Accesorios-Orginales-MAN-2023.pdf/_jcr_content/renditions/original./Catlogo-Accesorios-Orginales-MAN-2023.pdf).
  • The red line (the supply line, also called the emergency line) charges the trailer reservoirs. It keeps the air reserve needed by the pneumatic system available; it continues supplying air while you drive, regardless of whether you are requesting service braking. [UN Regulation No. 13, paragraphs 5.1.3 and 5.2.2.12](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).
  • The yellow line transmits the pneumatic service braking demand. The trailer system uses its valves and stored air to produce the requested braking force. You must not imagine that all the air for each actuator has to travel from the cab through the yellow line every time you brake.
  • The electrical braking connection and its role in ABS and EBS are explained in “EBS and the ISO 7638 connection” in this module.

9Spring brake chambers and semi-trailer parking brakes

A driver pulls the red parking brake knob of a semitrailer still coupled to its tractor unit, with a wheel secured by a chock in a parking area.
The key idea

With spring brake chambers, the spring applies your brake and air releases it.

Semi-trailer control: usual panel with red and black knobsAction
Pull redApplies the spring parking brake
Push redCan release it if enough pressure is available
Black release knobUses stored air to release automatic service braking on the uncoupled trailer

Remember

  • Apply the semi-trailer’s own brake before uncoupling.
  • Identify the symbols and follow the equipment’s instructions.
  • The black knob alone does not release an applied spring parking brake.
  • Before using it, secure the trailer and prepare to control the manoeuvre.
  • Secure the trailer again after manoeuvring.

Exam trap: Wrong: air applies the spring parking brake. Right: the spring applies it; air keeps it released.

Read the full explanation
  • In the tractor unit and many heavy semi-trailers, the parking brake uses spring brake chambers: the spring applies the brake and compressed air keeps it released. When you apply the parking brake, air is exhausted so that the spring can act. The service brake chamber, by contrast, applies the brake when it receives pressure. [United Nations Regulation No. 13, Annex 8](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).
  • You must be able to keep the semi-trailer parked even when it is detached from the tractor unit, using a control accessible from ground level. You must apply its own brake before uncoupling it. [United Nations Regulation No. 13, paragraph 5.2.2.10](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).
  • On the usual panel with two controls, the red knob controls the semi-trailer parking brake: pulling it applies the spring brake; pushing it allows you to release the brake if there is sufficient pressure. Identify the symbols and the equipment instructions, as designs with a single control also exist. [Haldex, TrCM valve](https://www.haldex.com/globalassets/europe/61.-documents/air-brake/006700115_es.pdf). [ZF, PRV valve](https://www.zf.com/products/es/cv/products_88002.html).
  • The black release knob allows you to release the automatic service braking of the uncoupled trailer for manoeuvring, using air from its reservoirs. It does not, by itself, release an applied spring parking brake. Before operating it, you must secure the trailer against movement and have a means of controlling the manoeuvre; afterwards, secure it against movement again. [Haldex, TrCM valve](https://www.haldex.com/globalassets/europe/61.-documents/air-brake/006700115_es.pdf); [United Nations Regulation No. 13, paragraph 5.2.2.11](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).

10Load-dependent brake control

An articulated lorry carries blocks secured with straps in the right-hand lane of a rural road, with the semitrailer’s air suspension and braking components visible.
The key idea

The load controller adjusts your braking force to the load you carry.

Axle loadController action
Light loadLimits force to reduce wheel-lock risk
Heavier loadAllows greater braking force

Remember

  • The load-dependent brake controller is called ALB.
  • With EBS, load adjustment can be electronic.
  • Do not always expect a separate mechanical valve.
  • Do not change its settings to try to increase braking.

Exam trap: Wrong: increasing the setting always improves braking. Right: incorrect adjustment can unbalance the combination.

Read the full explanation
  • The load-dependent brake control, known as ALB, adjusts the pressure sent to the brakes according to the load carried by the axles. With a light load, it limits braking force to reduce the risk of wheel lock; with a heavier load, it allows greater force. You may find systems that detect the load through suspension movement or suspension air pressure. [United Nations Regulation No. 13, Annex 10, paragraph 7](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).
  • In a system with EBS, braking can be adapted to the load electronically. You must not assume that there is a separate mechanical ALB valve, or alter its settings to increase braking: incorrect adjustment can unbalance the combination. [United Nations Regulation No. 13, Annex 10, paragraph 7](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).

11EBS and the ISO 7638 connection

A driver checks the electrical braking connector between the tractor unit and semitrailer of an articulated truck parked beside the kerb on its right.
The key idea

You must connect and check the trailer’s electronic brake power supply.

SystemPurpose
EBSManages pressure to coordinate braking
ABSPrevents wheel lock

Remember

  • EBS controls braking electronically; air provides the energy.
  • Connect ISO 7638 and check its warnings.
  • If equipped for EBS, the connection also carries data.
  • If electronics fail, pneumatic backup braking may remain with reduced functions.
  • Read the warning and follow the manufacturer’s instructions.

Exam trap: Wrong: connecting the lights guarantees EBS. Right: you must also check the electrical braking connection.

Read the full explanation
  • EBS is the electronic control of the braking system: it manages the application and release of pressure in the actuators to coordinate a rapid response from the combination. You must distinguish it from ABS, whose specific function is to prevent wheel lock. In an electropneumatic system, the electronics control braking and the air supplies the energy to operate the brakes. [DGT, Manual VIII, topic 10, new technologies](https://sede.dgt.gob.es/export/sites/dgt/.galleries/permisos-de-conducir/certificacion-aptitud-profesores-formacion-vial/2020/Manual-VIII-Mecanica-2020.pdf).
  • The ISO 7638 connector supplies power to the trailer’s electronic braking equipment; with a connection designed for EBS, it also allows data communication between the tractor unit and the towed vehicle. You must connect it and check its warnings: the lighting plug does not confirm that this connection is operational. [United Nations Regulation No. 13, paragraphs 5.1.3 and 5.2.2.17](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).
  • If the power supply or electronic communication fails, pneumatic backup braking may remain available, depending on the system, with reduced functions. You must interpret the specific warning and follow the manufacturer’s instructions; do not assume that having pressure guarantees all electronic functions. [United Nations Regulation No. 13, paragraph 5.2.2.15](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).

12Connections that maintain their function

A worker checks the pneumatic and electrical connections between the tractor unit and semitrailer of an articulated truck secured with a plain yellow wheel chock, with the hoses hanging with slack.
The key idea

You must check compatible connections and hoses that allow turns without damage.

Remember

  • Check mechanical, electrical and pneumatic compatibility.
  • Leave enough hose movement for the combination to turn.
  • Prevent rubbing, pulling, pinching and contact with hot parts.
  • With the vehicle secured, check locks, seals, pipes and unusual leaks.
  • Check braking as instructed, slowly and in a safe area.
  • Keep the trailer secured during connection and disconnection.

Exam trap: Wrong: disconnecting pipes is a normal parking method. Right: use the securing devices and follow the specific sequence.

Read the full explanation
  • You must check the compatibility of the mechanical, electrical and pneumatic connections between the towing and towed vehicles. The Reglamento General de Vehículos (General Vehicle Regulations) requires this compatibility: simply being able to bring two coupling heads together physically or secure them with a makeshift arrangement is not enough. [RGV, art. 13](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a13).
  • Inspect the hoses with the combination ready for the road: they must allow articulation without stretching to the point of coming loose, or hanging where they can chafe, become pinched or touch hot parts. A connection that is correct in a straight line can fail when you turn if you have routed it incorrectly.
  • With the vehicle secured, check that the coupling heads are locked, that the seals and pipes are in good condition and that there are no abnormal leaks. Then check the indicators and braking response using the check specified by the manufacturer, in a safe area and at low speed.
  • The complete connection and disconnection sequence is covered in “Safe coupling and uncoupling”. Here, you must remember its consequence for braking: supplying air to or releasing a system can change the state of the brakes. Keep the towed vehicle secured and follow the specific sequence; do not use pipe disconnection as a routine parking method.

13Automatic braking on separation

An orange semitrailer brakes after separating from a green tractor unit, with disconnected pneumatic hoses, in the right-hand lane of a rural road.
The key idea

Automatic braking must stop your trailer if it separates from the towing vehicle.

Trailer systemAction on separation
Mechanical breakaway deviceThe cable pulls the brake mechanism
PneumaticLoss of supply associated with separation activates automatic braking

Remember

  • Do not confuse this device with ABS.
  • Attach the breakaway cable as instructed by the manufacturer.
  • Allow movement for turns without preventing the cable from working.
  • The cable cannot fix a faulty main coupling lock.
  • Keep safety devices working and repair faults.

Exam trap: Wrong: losing air supply always leaves the trailer free to move. Right: when separation occurs, the intended automatic device acts.

Read the full explanation
  • The trailer’s automatic braking must operate if the parts of the combination separate, including if the coupling breaks, without reducing the braking effectiveness of the rest. You must not confuse it with ABS or autonomous braking to avoid a collision: it responds to separation. [RGV, Annex VIII, section 1.5](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anviii).
  • On a trailer with a mechanical breakaway device, the correctly secured cable pulls the intended mechanism when the coupling separates. You must install it following the instructions, with enough movement for articulation and without an improvised attachment that prevents it from operating. Its presence does not remedy a defective main locking mechanism.
  • In a pneumatic system, a loss of supply associated with separation activates the automatic device provided. You must not conclude that losing air always leaves the trailer completely unbraked: safety functions use the trailer’s reserve or spring energy, depending on the design.
  • You must keep the automatic protection operational, with its devices and connections in good condition. If you detect a fault, you must repair it before driving: emergency operation requires the intended mechanism to be able to apply the brakes. [UN Regulation No. 13, section 5.2.2.9](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).

14Secondary chain and breakaway cable

An articulated truck with a green cab and orange semitrailer is stopped beside the kerb, with the pneumatic brake connections visible between them.
The key idea

You must distinguish the chain that restrains from the cable that applies braking.

1,500 kgMaximum MMA: secondary coupling condition
ItemPurpose
Secondary couplingKeeps the drawbar off the ground and retains some steering if the main coupling fails
Breakaway cable on a braked systemApplies the brake mechanism when the coupling separates

Remember

  • Up to 1,500 kg MMA, fit secondary coupling if breakaway braking is absent.
  • Keep the attachment and route the manufacturer specifies.
  • For heavy trailers, do not replace automatic braking with any ordinary chain.
  • O3 and O4 trailers need automatic braking.

Exam trap: Wrong: the secondary chain applies the brakes. Right: the chain holds the drawbar; the breakaway cable operates the brake mechanism.

Read the full explanation
  • If a trailer with an MMA (maximum authorised mass) not exceeding 1,500 kg has no system that ensures braking if the coupling breaks, it must have a secondary coupling. Its purpose is to prevent the drawbar from touching the ground and retain some residual steering control if the main coupling fails. [RGV, art. 13](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a13).
  • The secondary chain retains the drawbar; the breakaway cable pulls the mechanism that applies the brakes. You must maintain the attachment and range of movement specified by the manufacturer so that each device performs its function. Fitting is covered in «Safe coupling and uncoupling», under «Breakaway cable and secondary coupling».
  • You must expect automatic braking protection on the heavy trailer in your combination, rather than addressing separation safety by fitting any chain. The table in Annex VIII requires this function for O3 and O4. Detailed installation and inspection of the safety components are covered in «Safety devices for the vehicle combination». [RGV, Annex VIII, section 2](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anviii).

15ABS on the towed vehicle too

A driver checks the electrical connection of the braking system on a semitrailer coupled to a tractor unit, with the combination parked beside the kerb on its right side.
The key idea

You must check the trailer’s ABS even when your tractor unit has ABS.

750 kgMaximum O1 mass
3,500 kgMaximum O2 mass
10,000 kgMaximum O3 mass
Technical trailer categoryCategory maximum mass
O1Up to 750 kg
O2Over 750 kg and up to 3,500 kg
O3Over 3,500 kg and up to 10,000 kg
O4Over 10,000 kg

Remember

  • ABS prevents wheel lock during braking.
  • It does not increase road grip.
  • Type-approval rules require ABS for O3 and O4; O4 needs category A ABS.
  • Check trailer connections and warnings.
  • For a particular vehicle, check type approval, age and documents.
  • Do not disable fitted ABS.

Exam trap: Wrong: the tractor unit’s ABS protects a semi-trailer without working ABS. Right: you must check the towed vehicle’s own system.

Read the full explanation
  • The technical trailer categories are defined by their maximum mass: O1 up to 750 kg; O2 over 750 kg and up to 3,500 kg; O3 over 3,500 kg and up to 10,000 kg; O4 over 10,000 kg. You must include the boundary value in the lower category: exactly 10,000 kg falls within O3. [DGT, Heavy Vehicle Manual, categories](https://sede.dgt.gob.es/.galleries/permisos-de-conducir/certificacion-aptitud-profesores-formacion-vial/2019/Manual-III-Reglamentacion-de-Vehiculos-Pesados-2019.pdf).
  • ABS automatically regulates wheel slip during braking to prevent the wheels from locking. You must understand that it regulates the braking effort of the brakes it controls; it does not add grip to the road surface or remove the need to choose a speed that allows you to stop the combination. [DGT, safety systems, ABS](https://www.dgt.es/export/sites/web-DGT/.galleries/downloads/conoce_la_dgt/que-hacemos/conocimiento-e-investigacion/Efectividad-Sistemas-de-Seguridad-Vehiculos.pdf).
  • The type-approval requirements of UN Regulation No. 13 specify ABS for O3 and O4; O4 requires the ABS corresponding to category A in its Annex 13. Do not confuse this technical ABS category with a driving licence category. [UN Regulation No. 13, section 5.2.2.13](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).
  • The tractor unit’s ABS does not make the brakes of a semi-trailer anti-lock if the semi-trailer lacks that system or it is faulty. You must check the towed vehicle, its connections and its warnings. The tractor unit’s control system does not allow you to assume that all wheels of the combination have the same protection.
  • The equipment required on a particular trailer depends on its category and the requirements applicable to its type approval and entry into service. You must consult its documentation to identify the installed equipment and keep it operational. The type-approval requirements cited describe the conditions for vehicle approval. [UN Regulation No. 13, section 12, transitional type-approval provisions](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).

16Emergency braking with ABS

An articulated truck with its tractor and semitrailer aligned brakes in its lane before a fallen branch, with clear space ahead and the driver on the left side of the cab.
The key idea

In an emergency with working ABS, you press firmly and maintain the necessary pressure.

Remember

  • Do not pump the pedal to imitate ABS.
  • Do not release the brake because of normal ABS vibration.
  • Look towards a safe path for the whole combination.
  • Avoid sudden steering movements.

Exam trap: Wrong: ABS always shortens braking distance. Right: it prevents wheel lock and helps control, but distance depends on conditions.

Read the full explanation
  • In an emergency with ABS operational, press the brake firmly and maintain the necessary pressure, without pumping the pedal or releasing it because of normal vibration. You must allow space for the path of both units. [DGT, using the brakes, emergency braking](https://revista.dgt.es/es/educacion-formacion/conducir-mejor/2023/0315-Frenadas.shtml).
  • Emergency braking requires you to use the available capacity in the face of immediate danger. You must avoid a sudden steering input which, combined with braking, destabilises the towed vehicle and closes the angle between it and the tractor unit.
  • ABS allows you to retain steering ability within the available grip. The length and articulation of the combination limit the evasive path: the semi-trailer needs space to follow it.
  • ABS does not guarantee a shorter distance on every surface; its function of preventing wheel lock helps you retain control. [DGT, effectiveness of safety systems](https://www.dgt.es/export/sites/web-DGT/.galleries/downloads/conoce_la_dgt/que-hacemos/conocimiento-e-investigacion/Efectividad-Sistemas-de-Seguridad-Vehiculos.pdf).

17ABS warnings and brake faults

An articulated lorry is stopped in a lay-by while a person wearing high-visibility clothing checks the semitrailer’s pneumatic connections with a pressure gauge.
The key idea

You must identify each warning and stop if a fault compromises safety.

FaultWhat you must distinguish
ABS faultAnti-lock control may stop working without losing all service braking
Insufficient pressureDo not treat it as just an electronic fault

Remember

  • Recognise the trailer’s own warnings.
  • A lamp may light during self-checks without indicating a lasting fault.
  • If it stays on afterwards, check its meaning and the system.
  • With weak braking, strong pulling or dangerous leaks, stop somewhere safe.
  • Repair the cause before driving again.
  • Do not judge trailer braking by its brake lights alone.

Exam trap: Wrong: if the towing vehicle brakes well, the whole combination is fine. Right: check the trailer’s braking too.

Read the full explanation
  • The trailer’s ABS warning has its own self-diagnostic sequence. If it stays on outside that sequence, you must check its meaning and inspect the installation. [UN Regulation No. 13, Annex 13, sections 4.1 and 4.2](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).
  • An ABS fault may leave service braking available, but without anti-lock regulation. An insufficient-pressure warning indicates a different risk: you must identify the specific message using the vehicle manual.
  • If you experience weak braking, severe pulling to one side, leaks or warnings that compromise safety, you must stop safely and repair the cause. General interpretation of warning lights is covered in «Maintenance and inspection of the vehicle combination».
  • The brake lights signal braking, but do not measure its effectiveness. You must assess the system indicators and the result of the combination’s functional check; a correctly functioning electrical lighting circuit can coexist with a pneumatic or mechanical fault.

18Braking distance and stopping distance

A green articulated truck maintains a wide gap behind an orange car with its brake lights illuminated as both travel to the right in their lane.
The key idea

When judging distances, you must also consider how the trailer’s brakes respond.

Combination distanceWhich distance you count
BrakingFrom when the combination begins braking until it stops
StoppingThe distance travelled during your reaction plus the braking distance

Remember

  • Count the distance you travel while reacting to danger too.
  • Leave enough space for both vehicles to stop if the vehicle ahead brakes sharply.
  • Take account of how the trailer’s brakes respond.
  • Adapt this margin to your speed, grip and both vehicles’ braking condition.
  • Consult “Speed and distances for vehicle combinations”, under “Reaction, braking and stopping the combination”.

Exam trap: Wrong: you judge distances by the tractor unit alone. Right: also allow for how the trailer brakes respond.

Read the full explanation
  • Braking distance is the distance the combination travels from when braking begins until it stops. To calculate the total stopping distance, you must add the distance travelled during your reaction time: the towed vehicle continues moving while you recognise the danger and operate the control.
  • You must leave enough space to stop the whole combination if the vehicle ahead brakes sharply, taking account of speed, grip and the braking condition of both units. The response of the towed vehicle’s brakes forms part of that margin. Distances and the factors affecting them are covered in «Speed and distances for vehicle combinations», under «Reaction, braking and stopping the combination». [RGC, art. 54.1](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54).

19Mass, load and grip

An articulated lorry with evenly distributed and secured cargo travels in the rain on a wet road, leaving a wide gap behind a car.
The key idea

You must adapt braking to weight, load distribution and grip.

Remember

  • With more mass, the brakes must deal with more energy.
  • Respect the load your brakes are designed for.
  • Distribute and secure your goods properly.
  • An empty trailer can lose grip if braking force is too high.
  • Consult “Load-dependent brake control” to understand how braking force adjusts.

Exam trap: Wrong: an empty trailer always brakes more stably. Right: too much braking force can make it lose grip.

Read the full explanation
  • The mass of the towed vehicle increases the energy its brakes must dissipate for the same reduction in speed. You must respect the load for which they are designed; the general relationship between mass, grip and distance is explained in «Speed and distances for vehicle combinations», in the section «Reaction, braking and stopping the combination».
  • The distribution of the load across the trailer axles affects its braking: an axle carrying little weight reaches the limit of grip sooner. You must distribute and secure the goods in accordance with «Safe, well-distributed loads», in the sections «Distribute mass between the axles» and «Check the load during the transport operation».
  • When the trailer is empty, adjusting the braking force prevents its wheels from being subjected to the force intended for a full load; how this works is explained in «Load-dependent brake control».

20A well-prepared normal braking manoeuvre

An articulated lorry with a green cab and orange semitrailer travels in the right-hand lane with its brake lights illuminated before a bend on a rural road.
The key idea

Watch how your trailer responds during normal braking.

Remember

  • Plan ahead to slow down.
  • Apply the service brake progressively.
  • Watch how the whole combination responds.
  • Trailer pushing or pulling sideways can indicate a fault.
  • If you notice these signs, check the system before continuing.
  • Consult “Driving techniques for heavy vehicle combinations” for braking before bends.

Exam trap: Wrong: ignore the trailer pushing or pulling sideways when braking. Right: check the system before continuing the transport operation.

Read the full explanation
  • When you apply the brakes normally, you must monitor how the towed vehicle responds: persistent pushing against the towing vehicle or a deviation from its course may indicate that its brakes act late or unevenly. This response requires you to check the system before continuing the transport operation.
  • Anticipation, progressive control inputs and slowing down before turning are covered in «Driving techniques for heavy vehicle combinations», in the sections «Smooth control inputs and appropriate speed» and «Bends: slow down before entering».

21What jackknifing is

An articulated truck with a green tractor and orange semitrailer jackknifes on a wet road, with skid marks and the entire vehicle within the lane below the centre line.
The key idea

Jackknifing happens when you lose control and the combination folds at its joint.

Part losing stabilityWhat can happen
Tractor unit’s rear axleThe tractor turns and the semi-trailer’s push helps fold the combination
Semi-trailerIts rear skids sideways

Remember

  • Distinguish jackknifing from normal turning at the joint.
  • Harsh braking or excessive speed increases the risk.
  • Slippery ground and poor load distribution also matter.
  • A trailer that brakes too little can push the towing vehicle.
  • If its wheels lock, it can stop following the intended path.

Exam trap: Wrong: ABS prevents every jackknife. Right: it reduces wheel-lock risk but cannot prevent every loss of stability.

Read the full explanation
  • Jackknifing is a sharp closing of the angle between the towing and towed vehicles due to loss of alignment and control. In an articulated vehicle, the two fold around the fifth wheel.
  • If the rear axle of the tractor unit skids, the push from the semi-trailer can close the angle. If the towed vehicle skids, its rear end can move sideways. [DGT, risks of heavy vehicles](https://revista.dgt.es/revista/hemeroteca/099%20TySV.pdf).
  • Harsh braking, poor grip, inappropriate speed and poor load distribution increase the risk of jackknifing. A trailer with insufficient braking pushes the towing vehicle; locked wheels lose lateral directional control.
  • ABS reduces the risk associated with wheel locking, but does not prevent all jackknifing. You must maintain a speed and course compatible with the grip and space available for the whole combination.

22How to prevent jackknifing

An articulated lorry with a green tractor unit and an orange semitrailer travels in alignment in the right-hand lane before a bend on a two-way road.
The key idea

You prevent jackknifing with space, suitable speed and coordinated braking throughout the combination.

Remember

  • Slow before bends and areas with poor grip.
  • Avoid combining hard braking with a sharp turn.
  • Repair faults that unbalance the combination’s braking.
  • If the vehicles start losing alignment, avoid sudden steering and abrupt braking changes.
  • Follow your practical training and the vehicle’s instructions.

Exam trap: Wrong: accelerating or pulling the trailer brake always corrects jackknifing. Right: your action depends on which wheels lose grip and the available aids.

Read the full explanation
  • You must anticipate the need to slow down before bends and slippery areas, allowing enough margin to brake progressively. Observation and use of the controls are covered in «Driving techniques for heavy vehicle combinations».
  • Braking on the towing and towed vehicles must be coordinated. An incorrect connection or a seized brake unbalances the combination and requires repair; increasing the braking on the tractor unit does not correct the fault.
  • If the vehicles lose alignment, avoid sudden steering movements and abrupt changes in engine or retarder braking. The action you take depends on which wheels lose grip and the assistance systems available: you must follow your practical training and the vehicle instructions.
  • Accelerating or applying the trailer brake separately can worsen the skid. There is no universal recovery manoeuvre; you must keep the assistance systems operational and avoid improvised inputs that lock the wheels of the towed vehicle.

23Long descents: prepare your speed

An articulated truck with an orange cab and green semitrailer travels in its right-hand lane before a long descent on a mountain road.
The key idea

On long descents, you must also monitor your trailer’s braking effort and alignment.

Remember

  • Consider the trailer’s weight when judging how hard the brakes work.
  • Even when you feel braking in the cab, trailer brakes may be working hard.
  • Check that your trailer stays aligned during the descent.
  • Consult “Overheating and loss of effectiveness” to understand heating in its brakes.
  • Consult “Driving techniques for heavy vehicle combinations” to choose speed, gear and braking effect.

Exam trap: Wrong: feeling braking in the cab proves the trailer brakes are doing little work. Right: they may also be working hard.

Read the full explanation
  • On a long descent, you must take the mass of the towed vehicle into account when assessing the work the brakes do: the engine or retarder braking you feel in the cab can coexist with heavy braking effort at the trailer wheels. Their heating is explained in «Overheating and loss of effectiveness».
  • The choice of speed, gear ratio and engine or retarder braking is covered in «Driving techniques for heavy vehicle combinations», in the section «Descents: prepare to control your speed»; during the descent you must monitor the alignment of the towed vehicle.

24Retarders and service brakes

An articulated lorry with an orange cab and green semitrailer descends in its right-hand lane, with the transmission retarder visible between the tractor unit’s axles.
The key idea

Adjust your towing vehicle’s braking effect to grip and check the trailer’s ABS.

Combination systemWhere it acts
Engine brake and transmission retarderOn the towing vehicle’s driven wheels
Trailer ABSPrevents the trailer’s wheels from locking

Remember

  • Transmission braking acts on the towing vehicle’s driven wheels.
  • On slippery ground, apply retarding force progressively.
  • Too much retarding force can lose grip while the trailer pushes.
  • Interpret the trailer’s ABS warning according to its own system.
  • Consult “Driving techniques for heavy vehicle combinations” for general retarder use.

Exam trap: Wrong: the towing vehicle’s braking effect replaces trailer ABS. Right: check the towed wheels’ own protection.

Read the full explanation
  • Engine braking and the transmission retarder act on the drive wheels of the towing vehicle. On slippery surfaces, excessive demand can cause these wheels to lose grip while the towed vehicle pushes: you must adjust it according to the equipment and available grip. [DGT, Mechanics Manual, auxiliary braking systems](https://sede.dgt.gob.es/export/sites/dgt/.galleries/permisos-de-conducir/certificacion-aptitud-profesores-formacion-vial/2020/Manual-VIII-Mecanica-2020.pdf).
  • The trailer ABS warning relates to its own anti-lock braking system: engine or retarder braking on the towing vehicle does not replace this protection for the towed wheels. You must interpret the warning according to «ABS warnings and brake faults»; general use of retarders is covered in «Driving techniques for heavy vehicle combinations», in the section «Retarders: progressive use and limitations». [UN Regulation No. 13, annex 13, section 4.2](https://www.boe.es/buscar/doc.php?id=DOUE-L-2026-80539).

25Overheating and loss of effectiveness

An articulated truck is stopped in a lay-by on a mountain road, with orange heat lines above its overheated wheel brakes.
The key idea

If your brakes overheat, they can lose effectiveness and you must act safely.

Remember

  • A brake that stays applied can overheat without you pressing the pedal.
  • Compressed air does not prevent this loss of effectiveness.
  • With unusual smells, heat warnings or weaker braking, find a safe stop.
  • Allow cooling and inspect as instructed; never pour water on or handle overheated parts.
  • If braking fails seriously, keep the engine running and use effective braking.
  • If an escape lane exists and you can reach it, enter it straight.

Exam trap: Wrong: switching off the engine solves serious brake failure. Right: keep it running, retain steering control and enter an accessible escape lane straight.

Read the full explanation
  • Heat built up in friction brakes can reduce their effectiveness: this is brake fade. It can affect the trailer brakes even when they are air-operated. [DGT, Mechanics manual, brake fade](https://sede.dgt.gob.es/export/sites/dgt/.galleries/permisos-de-conducir/certificacion-aptitud-profesores-formacion-vial/2020/Manual-VIII-Mecanica-2020.pdf).
  • If you notice an unusual smell, an overheating warning or reduced response from the trailer brakes, you must find a safe place to stop, inspect them and let them cool according to the manufacturer’s instructions. Their reduced contribution forces the towing vehicle to do more work and can unbalance braking across the combination.
  • A brake that remains applied can overheat even when you do not press the pedal. Avoid handling hot components or pouring water onto discs and drums. Inspection is covered in «Maintenance and inspection of the vehicle combination».
  • If you suffer a serious loss of braking, use effective engine braking and retarders and an accessible escape lane. You must keep the engine running and enter with the vehicle aligned, maintaining steering control. [DGT, braking techniques for heavy vehicles](https://sede.dgt.gob.es/export/sites/dgt/.galleries/permisos-de-conducir/certificacion-aptitud-profesores-formacion-vial/2024/Manual-II-Cuestiones-de-Seguridad-Vial-2024.pdf).

Check that the towed vehicle can brake

Check connections, reserves and response together before driving.

  1. Keep the combination immobilised and check that its systems are compatible.
  2. Identify the red supply line, yellow control line and electrical braking connection where fitted.
  3. Check couplings, seals and hose routing, ensuring there are no leaks and no risk of hoses being pulled taut as the combination articulates.
  4. Wait until the prescribed pressure conditions are met and check the warnings on the towing vehicle and trailer.
  5. Carry out the braking check specified by the manufacturer in a safe place; correct any fault before driving.

Brake for a hazard with ABS working

Use the available braking capacity and maintain a controlled course.

  1. Look towards a safe path and assess the space available for the whole combination.
  2. Apply the brake firmly when you need to make an emergency stop.
  3. Maintain the necessary pressure and let ABS modulate the braking; do not pump the pedal.
  4. Steer in a controlled manner, without a sudden steering input that compromises the stability of the towed vehicle.
  5. Once stopped, secure the combination and assess the situation before continuing.

Control a long descent

Prepare your engine braking and retarders and keep braking capacity in reserve.

  1. Slow down before starting the descent, taking account of mass, grip and road layout.
  2. Select a gear or descent mode suitable for the vehicle.
  3. Apply the available engine braking and retarders progressively, following the manufacturer’s instructions.
  4. Use the service brake when necessary and monitor your speed to keep it under control.
  5. If braking becomes less effective or abnormal overheating occurs, find a safe place to stop; if you lack braking, use whatever effective means are available and an accessible escape lane.

Finished this module?

Mark it as read and you will see your progress on the theory list.

Next module