Theory · A2 Licence - Motorcycle · Module 8 of 18

Motorcycle lights and signals

You learn to choose your motorcycle lights during the day, at night, in tunnels and in poor visibility without dazzling others. You distinguish compulsory and optional lights, manoeuvre and emergency signals, and the plates you need to recognise to answer A2 exam questions.

32 min read25 sectionsReviewed Nov 3, 2026
A helmeted rider travels on a green motorcycle in the right-hand lane of a road at dusk, with the headlight and rear light illuminated.
See and be seen on a motorcycle

1Seeing, being seen and giving warnings

A helmeted motorcyclist rides in the right-hand lane toward a tunnel during daylight, with the headlight on illuminating the road.
The key idea

Use each light to see, be seen or warn others.

Remember

  • Use the required lights from sunset to sunrise, in tunnels and underpasses.
  • Use them when fog, heavy rain, snow, smoke or dust greatly reduces visibility.
  • Having fog lights does not mean you can always use them.

Exam trap: Wrong: You can replace any compulsory light with another. Right: Each compulsory device has its own purpose.

Read the full explanation
  • Your lights serve three purposes: illuminating the carriageway so you can see, showing your presence so others can see you, and signalling a manoeuvre or a hazard. On your motorcycle, dipped beam and main beam illuminate the road ahead; position lights, brake lights and indicators convey different information. You cannot replace a compulsory device with another that serves a different purpose. [RGV, art. 16](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a16).
  • Fitting a device and switching it on are separate obligations. You can have optional fog lamps, but you can only use them in the circumstances specified by the regulations. Similarly, your motorcycle must have main beam, although you must ride with dipped beam when circumstances require it. [RGV, art. 17](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a17). [RGC, art. 101](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a101).
  • You must use the appropriate lights from sunset to sunrise and at any time in tunnels, underpasses and stretches covered by the tunnel sign. [RGC, art. 98](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a98).
  • When fog, heavy rain, snow, smoke or dust significantly reduce visibility, you must also use the appropriate lights during the day. [RGC, art. 106](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a106).

2Equipment on a motorcycle without a sidecar

A green motorcycle without a sidecar is parked beside the right-hand kerb, with its headlamp, four amber indicators, red rear lamp, license plate light and rectangular rear reflector visible.
The key idea

Keep the lights and reflectors required for your motorcycle without a sidecar.

1 November 1999Indicators mandatory from this date
Device on motorcycles without sidecarsEquipment
Dipped and main beamOne or two white lights for each function
Position lightsOne or two at the front and one or two at the rear
Brake lightsOne or two
IndicatorsTwo front and two rear; check exceptions for older motorcycles
Fog and hazard warning lightsGenerally optional; keep equipment required for your model

Remember

  • You need dipped beam, main beam, brake lights and rear number plate lighting.
  • You need front and rear position lights and a non-triangular rear reflector.
  • You need two front and two rear amber indicators.
  • For motorcycles made before 1 November 1999, check the applicable rules and type approval.

Exam trap: Wrong: You can remove any optional light. Right: Keep it if your model’s type approval requires it.

Read the full explanation
  • Your motorcycle must have dipped beam, main beam, brake lights, rear number plate lighting, front position lights, rear position lights and a non-triangular rear reflector. [RGV, art. 16](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a16).
  • Your motorcycle has one or two white dipped-beam lamps and one or two white main-beam lamps. The motorcycle table lists one or two front position lights, one or two rear position lights, and one or two brake lights. Having two front lamp units does not necessarily mean that both always perform the same function. [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).
  • Your direction indicators consist of two front and two rear amber lights. Annex X makes them compulsory for motorcycles from 1 November 1999; if a question concerns an older motorcycle, you must consider the rules and type approval applicable to it, without automatically extending that exception to a modern motorcycle. [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).
  • You can have fog lamps and hazard warning lights in accordance with the RGV. Keep the equipment required by your motorcycle's type approval: the fact that Annex X classifies a device as optional does not allow you to remove it if your model must have it. [RGV, art. 17](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a17). [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).

3Position lights: presence and width

A helmeted motorcyclist rides at night in the right-hand lane of a road with the red rear position light on and the dipped headlight illuminating the road.
The key idea

Position lights show your presence and width; you need other lights when riding.

Position lights on your motorcycleColour
FrontWhite or amber
RearRed

Remember

  • Use the position lights at night, in tunnels, underpasses and greatly reduced visibility.
  • Add the lighting you need for riding.
  • Do not confuse amber front position lights with indicators.
  • Keep your lights in their approved positions.

Exam trap: Wrong: Ride at night with only the position lights. Right: Add the appropriate driving lights.

Read the full explanation
  • With position lights, you make your vehicle's presence and width visible. In the motorcycle table, your front position lights can be white or amber; your rear position lights are red. Do not confuse a type-approved amber front position light with an indicator: its purpose and operation are different. [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).
  • You must keep your position lights on when riding at night, passing through tunnels or underpasses, or in conditions that significantly reduce visibility. You cannot ride in these circumstances using only position lights: you also need the driving lights appropriate to the situation. [RGC, art. 99](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a99). [RGC, art. 101](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a101).
  • The connections required by the regulations ensure that your front position lights come on with dipped beam, main beam or front fog lamps, and that your rear position lights come on with the prescribed lighting. Warning flashes follow specific rules and are not equivalent to the continuous lighting you use while riding. [RGV, art. 15](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a15).
  • If you have a single lamp for a function in the cases specified in the table, it is positioned on the vehicle's longitudinal centre plane; if you have two, they are positioned symmetrically about it. You must keep the type-approved arrangement: adding or moving lights for appearance can alter the information others receive when they see you. [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).

4Dipped beam during the day too

A helmeted rider travels on a green motorcycle with its dipped-beam headlight on in the right-hand lane of a road on a sunny day.
The key idea

Keep dipped beam on during the day whenever you ride your motorcycle on a road.

Remember

  • Use dipped beam on every road, including urban roads, motorways and dual carriageways.
  • Keep it on even in sunshine and good visibility.

Exam trap: Wrong: Daytime dipped beam is only needed outside towns. Right: Use it on every road when riding your motorcycle.

Read the full explanation
  • You must keep your short-range headlights, or dipped beam, on during the day when riding a motorcycle on any road subject to traffic legislation. The rule in article 104 covers urban roads, other roads, autopistas (motorways) and autovías (dual carriageways with motorway characteristics), even in sunshine and good visibility. [RGC, art. 104](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a104).

5Daytime running lights and automatic systems

A helmeted motorcyclist is about to enter a tunnel in the right-hand lane with the dipped headlight on while it is sunny outside.
The key idea

Check your automatic lights before entering a dark area.

Remember

  • Daytime running lights make your motorcycle visible during the day.
  • They cannot light your way through a dark area.
  • The sensor may take time to react.
  • Use the switch if the required lights are missing.

Exam trap: Wrong: Always rely on the sensor. Right: Check your lights and switch them on when needed.

Read the full explanation
  • Your daytime running lights make your motorcycle visible during the day. Their type approval provides for one or two front devices. They are not intended to replace the road illumination you need when entering a dark area. [UN Regulation 53, para. 6.13](https://www.boe.es/buscar/doc.php?id=DOUE-L-2020-80040).
  • Check which lights your motorcycle's automatic system has switched on before entering a dark area: the sensor can take time to react. You must operate the switch if the required lights are not on. [RGC, art. 98](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a98).

6Dipped beam at night and in built-up areas

A helmeted motorcyclist rides to the right with the dipped headlight on along a street at night lit by street lamps, beside houses with tiled roofs.
The key idea

Use dipped beam at night in towns and whenever you could dazzle others.

40 km/hThreshold not exceeded
Night-time situationLights to use
Well-lit roadPosition lights and dipped beam
Poorly lit road in townDipped beam
Outside town, poor lighting and risk of dazzleDipped beam

Remember

  • At night, use position lights and dipped beam on well-lit roads.
  • In towns, use dipped beam even on poorly lit roads.
  • Outside towns, use dipped beam if you could dazzle others.
  • At 40 km/h or below, use dipped beam if not using permitted main beam.

Exam trap: Wrong: Above 40 km/h you always need main beam. Right: On a well-lit road, use dipped beam.

Read the full explanation
  • You must use position lights and dipped beam at night on adequately lit urban and interurban roads. [RGC, art. 101](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a101).
  • Within built-up areas, you must also use dipped beam when the road is inadequately lit. [RGC, art. 101](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a101).
  • Outside built-up areas, on an inadequately lit road, you must use dipped beam when you could dazzle other road users. You also use it if you are travelling at no more than 40 km/h and are not using main beam. At exactly 40 km/h, you do not exceed the threshold that makes main beam compulsory. [RGC, art. 101](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a101).
  • On a well-lit road, travelling at more than 40 km/h is not enough to make main beam compulsory. You must meet the conditions in article 100. [RGC, art. 100](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a100). [RGC, art. 101](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a101).

7When you must use main beam

A motorcyclist rides in the right-hand lane of an unlit rural road at night, with high beams illuminating the empty road ahead.
The key idea

Use main beam when required; change to dipped beam if you could dazzle others.

40 km/hMain beam required above this
10 mCannot read a number plate
50 mCannot distinguish a dark vehicle
SituationMain beam use
Night, outside towns, poor lighting and above 40 km/hRequired unless dipped beam is necessary, especially to avoid dazzle
Poorly lit tunnel, underpass or stretch signed as a tunnel, at any timeRequired above 40 km/h, except where dipped beam is required
Up to 40 km/hPermitted where allowed, without dazzling others

Remember

  • At night, use main beam above 40 km/h outside towns on poorly lit roads.
  • Use dipped beam if you could dazzle others or another rule requires it.
  • Keep position lights on with main beam; you may add dipped beam.
  • Do not keep main beam on when stopped or parked.
  • With normal vision, failing either visibility check means the road is poorly lit.

Exam trap: Wrong: Main beam is always banned below 40 km/h. Right: You may use it where permitted, without dazzling others.

Read the full explanation
  • You must switch on main beam at night when you travel at more than 40 km/h outside built-up areas on a road with insufficient lighting, unless you must use dipped beam, especially to avoid dazzling others. You must also use it at more than 40 km/h at any time in tunnels, underpasses and sections signed as tunnels with insufficient lighting, with the same exceptions; see «Tunnels and special lanes». [RGC, art. 100](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a100). [RGV, art. 16](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a16).
  • You may use main beam at a speed no higher than 40 km/h in circumstances that allow its use and without dazzling others. The threshold of more than 40 determines the obligation described; it does not prohibit using main beam below that speed. [RGC, art. 100](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a100). [RGC, art. 101](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a101).
  • You may use main beam on its own or together with dipped beam, keeping the position lights on. [RGC, art. 100](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a100). [RGV, art. 15](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a15).
  • You must not keep main beam on when your motorcycle is stopped or parked. You must also not alternate between main and dipped beam for any purpose other than permitted warnings. Avoid confusing continuous road illumination with a brief, lawful flash to warn of danger. [RGC, art. 100](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a100).
  • A road has insufficient lighting if, with normal vision and at any point on the carriageway, you cannot read a number plate at 10 metres or distinguish a dark vehicle at 50 metres. Either circumstance is sufficient; these are not statutory distances you wait to reach before switching off main beam. [RGC, art. 100](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a100).

8Avoiding dazzling others and dealing with dazzle

A motorcyclist rides with a dipped headlight directed toward the asphalt while meeting a car traveling in the opposite lane on a two-way road.
The key idea

Change to dipped beam as soon as you could dazzle someone.

Remember

  • Protect people travelling on other routes too.
  • Dip your headlights even if the other driver keeps main beam on.
  • You can dazzle the driver ahead through their mirrors.
  • Separated traffic directions do not always prevent dazzle.
  • If dazzled, slow down; stop if necessary.
  • After passing, restore main beam only if you cannot dazzle anyone.

Exam trap: Wrong: Wait until a fixed distance before dipping. Right: Dip as soon as you could dazzle someone.

Read the full explanation
  • You must change from main beam to dipped beam as soon as you recognise the possibility of dazzling someone. You protect users of your road and those of another transport route too. There is no single distance that allows you to keep main beam on until a fixed number of metres in every case. [RGC, art. 102](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a102).
  • When you pass an oncoming vehicle, you must switch to dipped beam even if its driver keeps main beam on. You may switch back to main beam after you pass it, provided you cannot dazzle another road user. [RGC, art. 102](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a102).
  • You must take the same precaution when following another vehicle, because you can dazzle its driver through the mirrors. The absence of oncoming traffic is not enough to permit main beam. On an autovía (dual carriageway with motorway characteristics), you must not assume it is safe to use main beam simply because the opposing traffic flows are physically separated. [RGC, art. 102](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a102).
  • If you are dazzled, you must reduce your speed as much as necessary, even coming to a complete stop, to avoid running into vehicles or pedestrians travelling in your direction. [RGC, art. 102](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a102).

9Tunnels and special lanes

A helmeted motorcyclist enters an illuminated tunnel during daylight in the right-hand lane, with the dipped headlight on.
The key idea

Choose lights for the tunnel’s lighting and use dipped beam in special lanes.

SituationLights to choose
Well-lit tunnelPosition lights and dipped beam
Poorly lit tunnelApply the conditions for dipped and main beam
Reversible, temporary additional or opposite-direction laneDipped beam during the day too

Remember

  • In well-lit tunnels, use the position lights and dipped beam.
  • In poorly lit tunnels, apply the dipped-beam and main-beam rules.
  • An urban tunnel does not allow main beam as normal town lighting.
  • During the day, use dipped beam in reversible, temporary additional and opposite-direction lanes.

Exam trap: Wrong: Every tunnel requires main beam. Right: Follow the conditions; well-lit tunnels require position lights and dipped beam.

Read the full explanation
  • In a sufficiently lit tunnel, you must keep the position lights and dipped beam on. In a tunnel with insufficient lighting, apply the conditions for dipped and main beam explained in «Dipped beam at night and in built-up areas» and «When you must use main beam». A tunnel within a built-up area does not make main beam the normal lighting permitted in town. [RGC, art. 100](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a100). [RGC, art. 101](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a101).
  • You must use dipped beam during the day in reversible lanes, temporary additional lanes and lanes opened in the opposite direction to normal traffic. This requirement also applies to the vehicles covered by articles 41 and 42. For you, it adds to the general requirement for motorcycles to use dipped beam during the day. [RGC, art. 104](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a104).
  • You study the conditions for entering and using these lanes in «Using the road on your motorcycle», in the sections «Reversible lanes», «Lanes running against the normal traffic direction» and «Temporary additional lanes».

10Front fog lamps

A helmeted motorcyclist rides in the correct lane on a foggy road with the dipped headlight and two white front fog lights switched on.
The key idea

Use front fog lights only in poor visibility or on the authorised road section.

6.50 mMaximum width for special case
SituationWhen you may use front fog lights
Poor weather or surroundingsWhen visibility is significantly reduced
Without poor weatherCarriageway no wider than 6.50 m, signed as closely spaced bends

Remember

  • You may fit approved white or selective-yellow front fog lights.
  • Use them when fog, heavy rain, snow, smoke or dust greatly reduces visibility.
  • You do not need thick fog to use front fog lights.
  • Keep daytime dipped beam on your motorcycle, and required dipped beam in special lanes.
  • Switch fog lights off when the conditions allowing them end.

Exam trap: Wrong: Any bend allows front fog lights. Right: Without poor weather, you need a carriageway of 6.50 m or less and signs showing closely spaced bends.

Read the full explanation
  • You may equip your motorcycle without a sidecar with one or two front fog lamps, white or selective yellow. Fitting them is optional under the RGV, but they must comply with type approval. You cannot add just any yellow auxiliary lamp and automatically treat it as a lawful fog lamp. [RGV, art. 17](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a17). [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).
  • You may use them when weather or environmental conditions significantly reduce visibility: fog, heavy rain, snowfall, smoke, dust or similar circumstances. You do not need thick fog to switch on a front fog lamp, unlike the particularly adverse conditions required for a rear fog lamp. [RGC, art. 106](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a106).
  • Article 106 permits you to use front fog lamps on their own or with dipped beam, or even main beam, while complying with the requirements for position lights and all other obligations. When riding your motorcycle during the day, keep dipped beam on to meet its specific requirement; fog lamps do not remove the requirement to use dipped beam in a special lane either. [RGC, art. 106](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a106). [RGC, art. 104](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a104).
  • You may also use them on a narrow road with many bends if the carriageway is 6.50 metres wide or less and the section is signed as a series of bends close together. You must meet both conditions: carriageway width and signing. A narrow lane within a wider carriageway does not by itself meet these conditions. [RGC, art. 106](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a106).
  • You may only keep them on while one of the authorised circumstances applies. [RGC, art. 106](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a106).

11Rear fog lamps

A motorcyclist rides in the right lane of a road in dense fog, with the tail light and a red rear fog light switched on.
The key idea

If fitted, use rear fog lights only in especially poor visibility.

SituationRear fog lights, if fitted
Thick fog, very heavy rain, heavy snow, dense smoke or dustYou must switch them on
Heavy rain alone or light fogYou must not switch them on

Remember

  • You may fit red rear fog lights on your motorcycle.
  • Use them in thick fog, very heavy rain, heavy snow, dense smoke or dust.
  • Switch them off when these conditions end.
  • To switch them on, use dipped beam, main beam or front fog lights.
  • They replace neither position nor brake lights, and do not permit dazzling main beam.

Exam trap: Wrong: Any rain requires rear fog lights. Right: If fitted, use them only in particularly adverse conditions.

Read the full explanation
  • You may have one or two red rear fog lamps; fitting them to a motorcycle is optional. If your motorcycle does not have them, you must not confuse this equipment choice with a faulty position light or brake light, which are compulsory equipment. [RGV, art. 16](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a16). [RGV, art. 17](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a17). [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).
  • If you have a rear fog lamp, you must use it only in particularly adverse conditions: thick fog, very heavy rain, heavy snowfall or dense clouds of smoke or dust. Heavy rain that permits front fog lamps does not by itself require a rear fog lamp: pay attention to the intensity described. [RGC, art. 106](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a106).
  • You may only keep it on when visibility is particularly poor. Its purpose is to make your presence stand out in very poor visibility; using it unnecessarily can inconvenience anyone following you and make your braking signals harder to distinguish. [RGC, art. 106](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a106).
  • You may only switch on a rear fog lamp when main beam, dipped beam or front fog lamps are on. It does not replace the rear position light or brake light. In thick fog, using dipped beam and the appropriate fog lamps does not allow you to keep main beam on if you can dazzle others. [RGV, art. 15](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a15). [RGC, art. 102](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a102). [RGC, art. 106](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a106).

12Braking and warning that you are slowing down

A helmeted motorcyclist travels in the right lane behind a car, with the motorcycle’s red brake light illuminated.
The key idea

Warn others when braking and before slowing down considerably.

Remember

  • Recognise the red rear brake light: it is brighter than the position light.
  • Check the light with the front brake, then with the rear brake.
  • Whenever possible, warn others before stopping or slowing down considerably.
  • Use repeated brake-light signals or the prescribed arm signal.
  • Warn others even when traffic forces you to slow down or stop.

Exam trap: Wrong: Both brakes must be pressed together to light the brake light. Right: Check that it responds to each control separately.

Read the full explanation
  • Your brake light is red, faces rearwards and is brighter than the rear position lights. Under the general table, your motorcycle without a sidecar has one or two brake lights. When they light up, they signal that you are braking, and you must be able to distinguish them from the rear lights that remain on while you ride. [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx). [UN Regulation 53, paras. 2 and 6.4](https://www.boe.es/buscar/doc.php?id=DOUE-L-2020-80040).
  • On a conventional motorcycle with separate front and rear brake controls, you must check the response of the brake light separately when you apply each brake. You do not need to press both controls simultaneously for it to work. Type approval requires the brake lights to come on when you apply the service brake. [UN Regulation 53, paras. 6.4.6](https://www.boe.es/buscar/doc.php?id=DOUE-L-2020-80040).
  • If you intend to stop or reduce your speed considerably, you must give a warning, whenever possible, by repeatedly using the brake lights or by giving the regulation arm signal described in «Regulation arm signals». You must also do this when traffic forces you to slow down or stop; it is not limited to a stop you choose voluntarily. [RGC, art. 109](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a109).

13Direction indicators

A motorcycle travels behind another in the right lane of a road with its left indicator illuminated before starting to overtake.
The key idea

Signal sideways movements early and cancel your indicator when finished.

Remember

  • Use the indicator on the side you are moving towards.
  • Signal when overtaking another motorcycle if you move sideways.
  • Keep signalling during the manoeuvre.
  • Signal your sideways movement when moving over to park.
  • Check that you can move safely.

Exam trap: Wrong: Your indicator gives you priority. Right: It shows your intention; check that the manoeuvre is safe.

Read the full explanation
  • You must give sufficient advance warning of a lateral movement using the indicator on the side towards which you move. You must also signal when overtaking another motorcycle if you change your path laterally. The small size of the vehicle you overtake does not remove the need to give a warning. [RGC, art. 108](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a108). [RGC, art. 109](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a109).
  • You must keep the indicator on throughout the manoeuvre and switch it off once you have adopted your new path. Check that your motorcycle’s indicator has cancelled: leaving it on can signal a different turn from the one you intend to make and confuse other road users. [RGC, art. 109](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a109).
  • You must use the appropriate indicator if you move towards that side to stop or park. The braking warning and the indicator communicate different aspects of your actions: you may need both so that the person behind understands what you intend to do. [RGC, art. 109](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a109).
  • Your indicator signals your intention, and you must check that you can move safely. Observation, positioning and the rules for turning and changing lanes are covered in the “Motorcycle manoeuvres” module. [RGC, art. 108](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a108). [RGC, art. 109](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a109).

14Regulation arm signals

A motorcyclist seen from behind rides in the right lane and extends the left arm horizontally, palm down, to signal a leftward movement.
The key idea

Use prescribed arm signals when light signals are unavailable and others can see you.

Your arm signalWhat you announce
Left arm horizontal, palm downMovement to the left
Left arm bent upwards, palm openMovement to the right
Short, quick up-and-down arm movementsStopping or slowing considerably, whenever you can warn others

Remember

  • Normally, warn others using your lights.
  • Your arm signal must follow the rules and be visible to others.
  • It overrides conflicting light signals only when it meets these conditions.
  • To reverse without a reversing light, extend your arm horizontally, palm facing backwards.

Exam trap: Wrong: Any arm gesture overrides lights. Right: Only a prescribed signal that others can see takes precedence.

Read the full explanation
  • As a general rule, you must use your lights to signal; if these are unavailable, you can use your arm. An arm signal is only valid if others can see it and you make it in accordance with the regulations. If it contradicts another visual signal, the arm signal takes precedence provided it meets these conditions. [RGC, art. 108](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a108).
  • If you extend your arm horizontally with your palm facing down, you signal a movement towards the side your hand points to. If you bend it upwards with your palm open, you signal a movement towards the opposite side. With your left arm, holding it horizontally indicates left and bending it upwards indicates right. [RGC, art. 109](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a109).
  • To warn that you are coming to a stop or slowing down considerably, you can move your arm up and down in short, quick movements, where possible. You must not confuse this movement with holding your arm horizontally to signal a lateral movement. [RGC, art. 109](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a109).
  • To signal reversing by hand, you extend your arm horizontally with your palm facing backwards when you have no reversing light. The signal communicates your intention; to carry out the manoeuvre, you must comply with the conditions governing it. [RGC, art. 109](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a109).

15Motorcycle hazard warning lights

A motorcycle is stopped on the right shoulder with both rear indicators lit as hazard warning lights while its helmeted rider waits off the roadway.
The key idea

Use hazard warning lights to warn of danger if your motorcycle has them.

SituationWhat to do if your motorcycle has hazard warning lights
Below required minimum speed and risk of being hit from behindSwitch them on
Stationary on a motorway, dual carriageway or in significantly reduced visibilitySwitch them on; keep the position lights on when required

Remember

  • Hazard warning lights flash all your indicators together.
  • After an accident or breakdown, warn of the obstruction; use hazards if fitted.
  • Keep the other required lighting on too.

Exam trap: Wrong: Riding slowly always requires hazards. Right: For insufficient speed, you must be below the required minimum and risk being hit from behind.

Read the full explanation
  • Your hazard warning lights operate all your direction indicators simultaneously to warn of danger; operating them together identifies an exceptional situation rather than a movement towards either side. [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).
  • You must use them if your vehicle cannot reach the required minimum speed and there is a risk of a rear-end collision. Both conditions must apply: the rule does not make all slow driving an automatic reason to switch on your hazard warning lights. [RGC, art. 49.3](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a49).
  • If you become immobilised on an autopista (motorway) or autovía (dual carriageway with motorway characteristics), or where circumstances substantially reduce visibility, you must signal with your hazard warning lights if fitted, and with your position lights where applicable. Although there is no general requirement to fit hazard warning lights, you must still use them in these situations if your motorcycle has them. [RGC, art. 109](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a109).
  • After an accident or breakdown, you must warn others of the obstruction and switch on your hazard warning lights if fitted, as well as any other required lights; advance warning using a V-16 beacon is explained in “Reflective vest and V-16 beacon”. [RGC, art. 130.4](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a130).

16Motorcycle immobilised at night

A motorcycle is stationary at night on the right shoulder of a road, with its white front position light and red rear position light illuminated.
The key idea

Keep position lights on when stationary at night or in poor visibility, except when exempt.

SituationWhat you must do
Stopped or parked at night on a poorly lit through-road’s carriageway or hard shoulderKeep position lights on; alternatives require parking in line and authorised equipment
Parked on an urban road that is not a through-roadYou may switch position lights off if lighting makes your motorcycle visible far enough away

Remember

  • On the carriageway or hard shoulder, keep position lights and required marker lamps on.
  • This applies whatever the reason for stopping.
  • Do not improvise parking lights on your motorcycle without a sidecar.
  • If obstructing the road, warn others and arrange removal as soon as possible.

Exam trap: Wrong: You can switch position lights off when parked on any street. Right: The exception requires an urban road that is not a through-road and enough lighting to distinguish your motorcycle.

Read the full explanation
  • If you become immobilised between sunset and sunrise, or in reduced visibility, on the carriageway or arcén (hard shoulder) of a road, you must keep your position lights on and, where applicable, your end-outline marker lamps. This applies whatever the cause: it is not limited to voluntary parking and does not require a breakdown. [RGC, art. 105](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a105).
  • On an insufficiently lit stretch of road through a town, if you stop or park at night on the carriageway or hard shoulder, you must keep your position lights on. The alternative of using parking lights or the two position lights on the side facing the carriageway applies to parallel parking and requires the authorised equipment; it does not allow you to improvise lights on a motorcycle without a sidecar. [RGC, art. 105](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a105). [RGV, art. 17](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a17).
  • On an urban road other than a stretch of road through a town, you can leave a motorcycle parked with its position lights off when the lighting allows it to be seen from a sufficient distance. This exception applies to parking and to this type of urban road. [RGC, art. 105](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a105).
  • If your motorcycle obstructs the road, you must mark it as a hazard and arrange for its removal as soon as possible; the full procedure is explained in “Motorcycle manoeuvres”, in the section “Immobilisation due to a breakdown or emergency”. [RGC, art. 130.1](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a130).

17Stopping in a tunnel and refuelling

A helmeted person refuels a green motorcycle parked beside a fuel pump with its lights switched off.
The key idea

Always switch off your engine when stopped in a tunnel or enclosed place.

two minutesKeep position lights on above
SituationWhat to switch off or keep on
Stopped in a tunnel or enclosed placeAlways switch the engine off, even if you stay at the controls
Waiting more than two minutes in a tunnel or enclosed placeKeep the engine off and position lights on
RefuellingSwitch off engine, lights and required electrical systems

Remember

  • In tunnels or enclosed places, switch the engine off whenever you stop.
  • Do this even if you stay at the controls.
  • If you wait more than two minutes, also keep position lights on.
  • When refuelling, switch off the engine, lights and electrical systems required by law.

Exam trap: Wrong: Switch the engine off only after two minutes stopped in a tunnel. Right: Always switch it off when you stop; if you wait more than two minutes, also keep position lights on.

Read the full explanation
  • If you stop inside a tunnel or enclosed place, you must always switch off the engine, even if you remain at the controls. If the wait lasts more than two minutes, you must also keep the position lights on until you can continue. [RGC, art. 115.1 and 2](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a115).
  • If an emergency leaves you immobilised in a tunnel or underpass, you must follow the procedure described in “Using the road on your motorcycle”, in the section “Stopping inside a tunnel”. [RGC, art. 97.3](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a97).
  • To refuel, you must switch off the engine, the lights and the electrical systems specified in the regulations; see “Motorcycle mechanics and maintenance”, in the section “Exhaust, catalytic converter and refuelling”. [RGC, art. 115.3-4](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a115).

18Reflective vest and V-16 beacon

A motorcyclist wearing a helmet and reflective vest stands beside their motorcycle stopped on the shoulder of a rural road, with an illuminated amber beacon secured to the rear luggage rack.
The key idea

Carry the required vest; if carrying a beacon, choose a connected, certified model.

Equipment on your motorcycleWhat to remember
Reflective vestYou must carry it and wear it in the required circumstances
V-16Carrying it is optional; if carried, it must be connected and certified
Warning trianglesNot valid regulatory warning devices

Remember

  • You must carry a reflective vest and wear it in the required circumstances.
  • You need not carry V-16 on your motorcycle.
  • If you carry one, you must use it to warn of your stationary motorcycle.
  • Check the model’s certification and that its connection service remains valid.
  • Place it as high as possible, securely attached and clearly visible.
  • It replaces neither hazards nor position lights; activation does not request medical assistance.

Exam trap: Wrong: Any beacon counts as a V-16. Right: It must be connected and certified; check that its connection service is still valid.

Read the full explanation
  • You must carry a reflective vest and wear it in the situations specified in the regulations; see “Motorcycle protective equipment”, in the section “Reflective vest: carrying and wearing it”. [RGV, Annex XII.3](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anxii). [RGC, art. 118.4](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a118).
  • You are not required to carry a V-16 beacon on your motorcycle: Annex XII.1 of the RGV requires it for other categories, while XII.3 requires you to carry a reflective vest. If you carry one, you must use it to give advance warning that you are immobilised, and only a connected, certified V-16 is valid; warning triangles are not valid as a regulatory warning device. [RGV, Annex XII.1 and 3](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anxii). [RGV, Annex XI, V-16](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#v-16). [RGC, art. 130.4](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a130).
  • You must place it at the highest possible point on your immobilised motorcycle, ensuring maximum visibility and secure attachment. [RGV, Annex XI, V-16](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#v-16).
  • The beacon has its own function: the V-16 emits amber light and communicates your location to the national traffic information point. It does not replace the hazard warning lights or position lights that you must keep on, and activating it does not amount to requesting medical assistance. [RGV, Annex XI, V-16](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#v-16). [RGC, art. 130](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a130).
  • You can check whether a model is valid in the DGT’s official list. When choosing and using a device, you must check that it is the certified model and that its connectivity service is active. The full procedure after an accident or breakdown is covered in the “Accidents, breakdowns and assistance” module. [RGV, Annex XI, V-16](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#v-16). [DGT, certified devices](https://www.dgt.es/muevete-con-seguridad/tecnologia-e-innovacion-en-carretera/Dispositivos-de-presenalizacion-V16/index.html).

19Reflectors and side visibility

An orange car follows a motorcycle in the right lane and its headlights illuminate the rectangular red rear reflector, separate from the rear lamp, while an amber reflector is visible on the fork.
The key idea

Recognise reflectors: they reflect incoming light rather than producing their own.

Device to recogniseHow you recognise it
Rear reflector on your motorcycle without a sidecarRed, non-triangular; reflects light
Motorcycle side reflectorAmber, non-triangular; reflects light
Side position lightEmits light; check your motorcycle’s own equipment table

Remember

  • Your motorcycle without a sidecar needs a red, non-triangular rear reflector.
  • Do not replace it with a reflective number plate or position light.
  • Associate triangular rear reflectors with the relevant categories of towed vehicles.
  • Do not add side lights required for other vehicle types.

Exam trap: Wrong: A reflector produces light. Right: It reflects incoming light and does not replace a position light.

Read the full explanation
  • You must equip your motorcycle without a sidecar with a red, non-triangular rear reflector. It reflects light from another source back towards that source, for example the headlights of an approaching vehicle. It emits no light of its own and does not replace the position lights, even though it appears illuminated when light falls on it. [RGV, art. 16](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a16). [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).
  • You can recognise side reflectors by their non-triangular shape and amber colour in the RGV motorcycle table; they reflect incoming light to make your motorcycle visible from the side. [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).
  • You must associate triangular rear reflectors with towed vehicles in the relevant categories, rather than with your motorcycle’s compulsory reflector. Shape, as well as colour, helps you distinguish devices. A reflective number plate does not count as a substitute for the rear reflector either. [RGV, art. 16](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a16). [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).
  • A side position light emits light to show a vehicle’s presence from the side; a side reflector reflects the light it receives. To identify your motorcycle’s equipment, you must use its own table; you must not add the side lights required for certain long vehicles in other categories. [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).

20End-outline marker lamps, parking lights and reversing lights

A green motorcycle without a sidecar is parked beside the kerb on its right, with its rear light, indicators and reflector visible.
The key idea

Distinguish other vehicles’ lights from those authorised for your motorcycle without a sidecar.

2.10 mMarker lamps above this width
DeviceStatus on your motorcycle without a sidecar
End-outline marker lamps and side position lightsNot listed in its equipment table
Parking lightsNot listed among its general optional devices
Reversing lightNot listed among its authorised devices

Remember

  • Recognise marker lamps: white at the front, red behind, placed as high as possible.
  • The general rule requires them above this width in the specified lighting conditions.
  • You do not need other vehicles’ interior or work lights.

Exam trap: Wrong: You can fit other vehicles’ lights for appearance. Right: Respect the devices authorised for your motorcycle without a sidecar.

Read the full explanation
  • End-outline marker lamps indicate the overall width: white at the front and red at the rear, fitted as high as possible. The general rule requires end-outline marker lamps when driving in the prescribed lighting conditions if the width exceeds 2.10 metres; this figure does not describe a motorcycle’s standard equipment. [RGC, art. 99](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a99). [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).
  • The table for motorcycles without a sidecar does not include end-outline marker lamps or side position lights. [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).
  • A parking light identifies a parked vehicle and can serve as an alternative in the case provided for by the regulations on a stretch of road through a town. It is not the normal light you must use when riding, nor is it listed among the general optional devices for a motorcycle without a sidecar. [RGC, art. 105](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a105). [RGV, art. 17](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a17).
  • A motorcycle without a sidecar has no reversing light in its list of authorised devices. You do not need to fit the interior lights or work lights used on other vehicles either. [RGV, art. 16](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a16). [RGV, art. 17](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a17).

21If your motorcycle has a sidecar

A helmeted rider drives a motorcycle with a sidecar in the right-hand lane during daylight, with the dipped headlight and the white front position lights on both the motorcycle and sidecar switched on.
The key idea

With a sidecar, follow the same lighting rules and show the combination’s width.

Remember

  • Keep dipped beam on during the day with a sidecar too.
  • Choose night-time lights under the same rules.
  • Your sidecar also needs front position, rear position and brake lights.
  • Only add devices authorised for this configuration.

Exam trap: Wrong: A sidecar removes the daytime dipped-beam requirement. Right: Keep dipped beam on and provide the required sidecar lights.

Read the full explanation
  • If you ride a motorcycle with a sidecar, you must keep dipped beam on during the day and choose your night-time lighting according to the same rules of use. [RGC, arts. 100, 101 and 104](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a104).
  • The combination also has front position lights, rear position lights and brake lights on the sidecar, to show its width and warn when you brake. You may fit the additional devices authorised by article 17.3 for this configuration. [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx). [RGV, art. 17.3](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a17).

22Flashing your headlights and sounding your horn

A helmeted motorcyclist rides in the right-hand lane and sounds the horn while approaching a blind bend on a rural road.
The key idea

Use headlight flashes and your horn only for permitted warnings.

WarningWhat you communicate
Brief headlight flashesPresence or danger, for permitted purposes
IndicatorThe path you intend to take

Remember

  • Keep flashes very brief and avoid dazzle, even in towns.
  • Permitted flashes do not allow continuous main beam in towns.
  • Do not use your horn unnecessarily or excessively.
  • For exceptional urgent service under serious conditions, use required sound warnings and fitted hazards.

Exam trap: Wrong: You can flash headlights for any reason. Right: Only use them for purposes permitted for audible warnings, without dazzling others.

Read the full explanation
  • You may give a warning with very brief flashes of dipped beam, main beam or both alternately, for the same purposes as permitted for audible warnings. You may do so even in built-up areas, avoiding dazzling others. Permission to flash your headlights does not allow you to use main beam continuously within built-up areas. [RGC, art. 109](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a109).
  • You may use your horn only for authorised warnings, with a sound that is not shrill and without unnecessary or excessive use; see «Preventive and efficient motorcycle riding». [RGC, art. 110](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a110).
  • Flashing your headlights warns others of your presence or danger, while your indicator shows the path you intend to take; use the device that matches your message. [RGC, arts. 108 and 109](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a109).
  • If you exceptionally use your motorcycle for an urgent service under the serious circumstances set out in article 70, you must give a warning using your hazard warning lights, if fitted, and the prescribed audible warning; the conditions and how you must act are explained in «Priority of passage», section «Emergency in a private vehicle». [RGC, art. 70](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a70).

23Number plate and rear illumination

A motorcycle travels in the right lane with a single blank white rear number plate illuminated by a white light and a bag secured above without obscuring the plate or lights.
The key idea

Keep your rear number plate visible, lit and in a format permitted for your motorcycle.

220 × 160 mmOrdinary motorcycle plate
132 × 96 mmShort trial and enduro format
Motorcycle typeNumber plate format
Ordinary220 × 160 mm
Two-wheeled trial or enduroMay use the short 132 × 96 mm format

Remember

  • Fit a single rear number plate, vertical or nearly vertical.
  • Your ordinary plate has a white background and black characters.
  • Use white lighting to illuminate it when required.
  • Do not let luggage or decorations hide your plate, lights or indicators.
  • A reflective plate still needs its lighting.
  • Within the European Union, your plate’s European flag and Spanish identification are sufficient.

Exam trap: Wrong: You can choose a short plate for any motorcycle’s appearance. Right: It is reserved for two-wheeled trial and enduro motorcycles.

Read the full explanation
  • You must display a single number plate at the rear of your motorcycle, vertically or almost vertically. A standard motorcycle plate has a white background and black characters. You must not confuse it with a moped’s yellow plate or fit a front plate as though you were driving a car. [RGV, Annex XVIII](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anxviii).
  • The standard motorcycle plate measures 220 by 160 millimetres. The small format of 132 by 96 millimetres is reserved for two-wheeled trial and enduro motorcycles; you cannot freely choose it for any motorcycle for aesthetic reasons. [RGV, Annex XVIII, Table 1](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anxviii).
  • You must have a white rear number plate light. In the circumstances set out in articles 99 or 106, you must keep that plate and any markings that require illumination lit. The reflective nature of the backing does not replace the lighting device. [RGC, art. 103](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a103). [RGV, Annex X](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anx).
  • You must not place luggage, supplementary plates or decorations where they hide the number plate or make it difficult to read, or cover lights and indicators. You must check this once your luggage is secured: a light that works but is hidden does not convey its warning correctly. [RGV, art. 49](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a49). [RGC, art. 14](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a14).
  • The Spanish nationality sign displays the letter E inside an ellipse. If your number plate incorporates the European flag and Spain’s identifying letter, you do not need to add a separate sign when travelling in other European Union countries. [RGV, Annex XI, V-7](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#v-7) and [Annex XVIII](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anxviii).

24L plate, ITV (vehicle roadworthiness test) and other badges

A helmeted motorcyclist rides in the right lane of a rural road with a green and white L plate visible at the rear of the motorcycle.
The key idea

Use your L plate and other markings according to your licence and applicable conditions.

one yearL for first qualifying year
100 × 130 mmL plate width and height
MarkingWhat you must remember
L, V-13First qualifying year of your first licence; another licence held effectively for a year may exempt you
ITV, V-19After a successful periodic inspection, except exempt historic vehicles; shows the next inspection due
Environmental sticker, V-25Display may be mandatory if the competent authority expressly requires it
Projecting load, V-20Red and white stripes; shows a rear projection

Remember

  • Display your L visibly at the rear; it need not be on the left.
  • Recognise the white L on a green background.
  • Your qualifying time is suspended during licence invalidity, impoundment or loss of driving rights.
  • Any time left still counts when the cause ends.
  • Without a windscreen, display ITV and environmental stickers somewhere clearly visible.

Exam trap: Wrong: Obtaining A2 always restarts a full year with L plates. Right: Count your first licence and effective time; complete any remaining L-plate period.

Read the full explanation
  • You must display the new-driver sign during the first qualifying year of your first driving licence. You are exempt from displaying this sign if you have held another national or foreign licence of any category, civilian or military, for at least one year of effective possession. [RGV, Annex XI, V-13.2](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#v-13).
  • The calculation of that year is suspended while your licence is invalid or impounded, or while you are deprived of the right to drive. When the reason for suspension ends, the remaining time continues to count. For example, if you have held your first licence for six months and obtain A2, six qualifying months remain. [RGV, Annex XI, V-13](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#v-13).
  • On your motorcycle, you must display the L plate in a visible position at the rear; you do not have to place it specifically on the left. The motorcycle format measures 100 millimetres wide by 130 high and displays a white letter L on a green background. [RGV, Annex XI, V-13](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#v-13).
  • You must display the periodic roadworthiness inspection sticker after a successful inspection, except for the exemption for historic vehicles. It indicates when the next inspection is due; if your motorcycle has no windscreen, you must place it somewhere clearly visible. Inspection intervals are covered in «Motorcycle licences and documentation». [RD 920/2017, art. 12](https://www.boe.es/buscar/act.php?id=BOE-A-2017-12841#a1-4) and [RGV, Annex XI, V-19](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#v-19).
  • The V-25 environmental badge identifies your vehicle’s recorded environmental classification. You may be required to display it when the competent authority expressly stipulates this; on a vehicle without a windscreen, you place it somewhere clearly visible. Its classification and low-emission zones are covered in «Preventive and efficient motorcycle riding». [RGV, Annex XI, V-25](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#v2).
  • You can recognise the projecting-load panel by its red and white stripes; it indicates a rearward projection. The cases where it applies and the load limits for your motorcycle are covered in «Passengers and loads on motorcycles». [RGV, Annex XI, V-20](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#v-20).

25Maintenance, faults and authorised equipment

A motorcyclist cleans the illuminated headlamp of a motorcycle parked beside the right-hand kerb of a road.
The key idea

Check your lights and slow down if a fault reduces what you can see.

200 eurosGenerally, riding without required lighting

Remember

  • Keep lights clean, secure, correctly aimed and working.
  • Check that luggage does not hide lights or your number plate.
  • Follow the manufacturer’s headlight adjustment instructions when carrying a passenger or luggage.
  • If an unrepairable fault reduces lighting during your journey, slow down.
  • Stop within the lit area; request assistance if you cannot ride safely.
  • You need not carry spare bulbs; replacements must respect the approved system.

Exam trap: Wrong: No spare-bulb requirement means riding normally with faulty lights is allowed. Right: Maintain mandatory lighting and find a safe solution; do not add unauthorised lights.

Read the full explanation
  • You must keep your lighting and signalling devices clean, securely fitted and working. As a practical check, inspect your position lights, dipped beam, main beam, indicators, brake light and number plate light before setting off. You must check whether an item of luggage obscures a lamp or an impact has altered the headlamp alignment. [RGV, art. 15](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a15).
  • You must maintain the correct headlamp adjustment when carrying a passenger or luggage and follow the manufacturer’s procedure. If the beam is too high, you can dazzle others; if it is too low, it reduces the area you can see effectively. [RGC, art. 102](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a102). [RGV, art. 15](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a15).
  • If a fault that you cannot repair during your journey forces you to ride with less intense lighting, you must reduce your speed so that you can stop within the illuminated area. You must not interpret this rule as permission to continue riding normally without compulsory lights; find a safe solution and request assistance when you cannot ride safely. [RGC, art. 107](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a107).
  • You are not required to carry a set of spare bulbs on your motorcycle. This does not allow you to ride with faulty compulsory lighting. If you replace a light source or fit accessories, you must comply with the type-approved system, without adding unauthorised lights or luminous and reflective paints. [RGV, annex XII](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anxii). [RGV, art. 15](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a15).
  • If you ride without the required lighting, you commit a serious offence, generally punishable by a fine of 200 euros. You must not assume that this amount applies to every technical defect or every instance of incorrect use: the classification depends on the specific circumstances. [Traffic Act, art. 76.e](https://www.boe.es/buscar/act.php?id=BOE-A-2015-11722#a76) and [art. 80](https://www.boe.es/buscar/act.php?id=BOE-A-2015-11722#a80).

Choosing your lights during a journey

Check the motorcycle-specific requirement and the conditions on the stretch of road.

  1. During the day, you must use dipped beam when riding your motorcycle on any road.
  2. Before a tunnel or in reduced visibility, check your position lights and the driving lights required; do not rely solely on the sensor.
  3. At night, in built-up areas or where lighting is sufficient, use position lights and dipped beam.
  4. At night outside built-up areas, or at any time in insufficiently lit tunnels and underpasses, use main beam at more than 40 km/h unless dipped beam is required, especially to avoid dazzling others.
  5. Switch on the fog lights appropriate to the conditions and switch them off when the circumstances permitting their use no longer apply.

Signalling a lateral movement

Your signal communicates your intention throughout the movement.

  1. Observe your surroundings and check whether you can carry out the manoeuvre safely.
  2. Switch on the indicator on the side towards which you intend to move in good time.
  3. Keep signalling throughout the movement, respecting the applicable priority rules.
  4. Cancel the indicator once you are following your new course; check that it is no longer flashing.

Warning of an immobilised motorcycle

Distinguish the vehicle lights from the advance warning beacon.

  1. You must put on the compulsory reflective vest when you get off and enter the carriageway or arcén (hard shoulder) of an interurban road.
  2. Warn others that your motorcycle is immobilised and switch on its hazard warning lights, if fitted, in the circumstances required by the regulations.
  3. At night or in reduced visibility, keep the position lights on; switch off main beam if you are stopped or parked.
  4. If you carry a V-16, you must position and activate it: use a certified connected model, securely attached as high as possible where it is visible.
  5. Move the motorcycle away when feasible and continue protecting the scene and requesting help as described in «Accidents, breakdowns and assistance».

Finished this module?

Mark it as read and you will see your progress on the theory list.

Next module