Theory · A2 Licence - Motorcycle · Module 7 of 18

Motorcycle mechanics and maintenance

You learn to recognise your motorcycle’s systems, check their condition and detect faults before riding. You distinguish technical requirements from the manufacturer’s recommendations and answer exam questions on tyres, brakes, the engine and transmission.

40 min read24 sectionsReviewed Nov 2, 2026
A person uses a pressure gauge to check the front tire of a motorcycle parked beside a road in a Mediterranean landscape.
Motorcycle checks and maintenance before riding

1Pre-ride checks and responding to a breakdown

A helmeted motorcyclist uses a pressure gauge to check the front tyre of a motorcycle parked in a roadside parking space.
The key idea

Check your motorcycle before riding and stop if you find a serious fault.

Remember

  • Check wheels, brakes, steering, suspension and controls with your motorcycle stable.
  • Check lights, horn, mirrors, fluid levels, transmission, leaks and fastenings.
  • Remove anti-theft devices and check the stands.
  • Practise the checks you may need during your test.
  • Follow the manufacturer's maintenance plan and have the ITV roadworthiness test.
  • Have unusual noises or vibrations checked.

Exam trap: Wrong: keep riding with an essential component faulty. Right: if brakes, steering or another essential component is affected, do not start or continue until repaired.

Read the full explanation
  • Before setting off, check tyres, pressures and wheels; brake feel and effectiveness; steering, suspension and controls; lights, indicators, reflectors, horn and mirrors. Check fluid levels, fuel or battery charge, transmission, leaks and fastenings. Remove anti-theft devices and check the stands. If the vehicle has windscreen wipers, washers or seat belts, include their condition and operation. Carry out checks with the motorcycle stable and follow the manual.
  • Before the A2 test manoeuvres, you must be able to carry out the checks selected at random: tyres, brakes, steering, emergency stop switch if fitted, chain, oil level, headlights, reflectors, indicators and horn. Practise locating each item and checking it safely. [RGCond, Annex V.B.3, letter b](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#anv).
  • A basic check helps you detect faults, but does not replace regular maintenance or the ITV (vehicle roadworthiness test). Follow the manufacturer’s intervals and procedures. [DGT, instructors’ guide, maintenance](https://www.dgt.es/export/sites/web-DGT/.galleries/downloads/nuestros_servicios/para-colaboradores-y-empresas/GUIA-MONITORES-MOTOCICLETA-NIPO.pdf).
  • If a serious fault warning appears, stop safely and check its cause. If it affects the brakes, steering or another essential component, do not start or continue riding until it is resolved; request assistance when necessary.
  • If you notice unusual noises or vibrations, arrange a diagnosis: they can signal a fault, and accelerating to try to compensate can make it worse.

2Conventional controls and familiarisation

A helmeted rider sitting on a manual motorcycle stopped beside the right-hand kerb looks at the handlebar controls with both hands on the grips.
The key idea

Learn your model's controls before you ride.

Control on a conventional geared motorcycleUsual function
Right handThrottle and front brake
Left handClutch; usually horn and dipped/main beam switch
Right pedalRear brake

Remember

  • Locate the controls before riding a different motorcycle.
  • Turn the throttle smoothly.
  • Sudden movements can make you lose stability or grip.
  • Automatic or adapted motorcycles may have different controls.

Exam trap: Wrong: every motorcycle has the same controls. Right: check your model's layout.

Read the full explanation
  • On a conventional geared motorcycle, you use your right hand for the twist-grip throttle and front brake lever; you use your left hand for the clutch lever and usually the horn and dipped/main beam switch. Locate each switch on your model.
  • Pressing down the pedal beside the right footrest normally operates the rear brake.
  • Operate the throttle smoothly and progressively. Opening and closing it abruptly can destabilise the motorcycle or cause the driven wheel to slip, especially when grip is poor.
  • Check your model’s controls before riding: motorcycles can be automatic, have no manual clutch, have combined braking or have adaptations. Check the specific layout before using a different motorcycle.

3Engine and operating cycle

A green motorcycle parked beside a road shows a cutaway engine with the spark plug, combustion gases above the piston, and the connecting rod linked to the crankshaft.
The key idea

Learn how your engine turns the piston's movement into rotation.

four strokesFour-stroke cycle
two revolutionsFour-stroke crankshaft turns
two strokesTwo-stroke cycle
one revolutionTwo-stroke crankshaft turns
Petrol enginePiston strokes per cycleCrankshaft revolutions per cycle
Four-strokeFourTwo
Two-strokeTwoOne

Remember

  • The piston moves inside the cylinder.
  • The connecting rod links the piston to the crankshaft.
  • In petrol engines, the spark plug ignites the mixture.
  • Four-stroke order: intake, compression, combustion-expansion, exhaust.
  • During expansion, gases push the piston and produce useful work.
  • Watch engine speed and avoid revving a cold engine.

Exam trap: Wrong: every two-stroke needs oil mixed into petrol. Right: it may have a separate oil tank; check your system.

Read the full explanation
  • The cylinder houses the piston and the cylinder head closes its upper end. The connecting rod links the piston to the crankshaft; together they convert reciprocating motion into rotation.
  • In a four-stroke petrol engine, the cycle runs in this order: intake, compression, combustion-expansion and exhaust. It consists of four piston strokes and two crankshaft revolutions. During expansion, gas pressure pushes the piston and produces useful work.
  • In a petrol engine, the air and petrol mixture is ignited by the spark from the spark plug.
  • In a two-stroke engine, the cycle is completed in two piston strokes and one crankshaft revolution. You must distinguish the cycle from the lubrication system: it may require a premix of petrol and specific oil, or have a separate oil tank with its own metering system.
  • The tachometer or rev counter shows engine speed in revolutions per minute, rpm. Keep within the engine speed permitted by the manufacturer and avoid revving a cold engine.

4Fuel supply, fuel and air filter

A mechanic inspects the removed air filter beside its open housing on a stationary motorcycle supported by a stand, with the cover resting on a stool.
The key idea

Use the correct fuel and look after your engine's air supply.

Fuel systemFunction
CarburettorPrepares the air and petrol mixture
Fuel injectionMeters fuel through injectors

Remember

  • Check permitted fuel in the manual and on the tank.
  • Use unleaded petrol if your petrol engine has a catalytic converter.
  • Clean or replace the filter as the manual explains.
  • Do not ride without a filter: dust can enter the engine.
  • Do not start with a leak or persistent strong fuel smell; arrange inspection.

Exam trap: Wrong: a dirty filter always increases fuel use. Right: it can with a carburettor without electronic correction; injection may correct the mixture.

Read the full explanation
  • Use the fuel, octane rating and composition approved by the manufacturer. On a petrol motorcycle with a catalytic converter, use unleaded petrol: lead can damage the converter. Check the compatibility of the fuel shown on the pump against the manual and the markings on the tank.
  • The carburettor prepares the air and petrol mixture through passages and ducts; fuel injection meters fuel through injectors controlled by its management system. You must keep components clean and have jerking, difficult starting or abnormal consumption checked, without automatically attributing them to a single fault.
  • The air filter traps particles before they enter the engine. You must clean or replace it according to its material and the manual: a paper element does not necessarily allow the washing and oiling that a foam element may require; riding without a filter exposes the engine to dust.
  • In a carburetted petrol engine without electronic mixture correction, a blocked filter restricts airflow, can enrich the mixture, reduce performance and increase consumption. You must not apply the same explanation of consumption to all electronic injection systems, which may correct fuel metering.
  • Check hoses, connections and possible fuel leaks without bringing flames near them. If you notice a persistent strong smell or a leak, you must avoid starting the engine and arrange an inspection.

5Lubrication and choosing oil

A person kneeling beside a green motorcycle on a maintenance stand consults an illustrated manual while holding a bottle of oil outside a garage.
The key idea

Choose the oil your manufacturer requires to protect your engine.

Engine systemWhat you must do
Four-strokeUse oil in its circuit, separate from fuel
Premix two-strokeAdd specific oil in the manufacturer's stated proportion
Two-stroke with separate lubricationKeep oil in its tank and check the system

Remember

  • Oil reduces friction, wear and the risk of parts seizing.
  • Choose the viscosity and all specifications required by the manufacturer.
  • Do not assume car engine oil suits your motorcycle.
  • W describes how the oil behaves at low temperatures.
  • The other grade describes viscosity when hot.

Exam trap: Wrong: add oil to every engine's petrol. Right: four-stroke oil stays separate; follow your two-stroke's lubrication system.

Read the full explanation
  • The oil film reduces friction, wear and the risk of seizure between moving parts. It also helps remove heat, clean and protect.
  • In a four-stroke engine, oil stays in a circuit separate from the fuel. You must use the prescribed viscosity and specifications, especially when the same oil lubricates the engine, gearbox and wet clutch: car engine oil is not automatically suitable for that motorcycle.
  • Oil can be mineral, synthetic or semi-synthetic. You must choose it according to the viscosity and all the specifications required by the manufacturer.
  • In a multigrade oil designation, the part with W describes its behaviour at low temperatures and the other part its viscosity grade when hot. Check which grade the engine permits for its operating conditions.
  • In a premix two-stroke engine, you must add specific two-stroke oil in the proportion specified by the manufacturer. If it has separate lubrication, keep oil in its tank and check the system.

6Oil level, oil changes and waste

A crouching person examines the oil sight glass of a motorcycle held upright on its centre stand on the level ground of a workshop.
The key idea

Check oil as your manual explains and give used oil to an authorised collector.

What you noticePossible explanation
Bluish smokeOil may be burning; arrange diagnosis
Brief white vapour when starting coldMay be condensation

Remember

  • Measure on level ground, with your motorcycle stable and in the specified position.
  • Check the required temperature, waiting time and dipstick procedure.
  • Keep the level between the marks: avoid too little or too much.
  • Change oil and filter when the manual requires.
  • Have persistent smoke, fluid loss or overheating investigated.
  • Do not pour away used oil or mix it with other fluids.

Exam trap: Wrong: always measure cold or with your motorcycle leaning. Right: follow your model's procedure.

Read the full explanation
  • Measure the level with the motorcycle stable, on level ground and in the prescribed position, normally upright. Identify the sight glass or dipstick; the checking temperature, waiting time after switching off and whether the dipstick is screwed in for measurement depend on the model: a reading with the motorcycle leaning can mislead you.
  • Keep the level between the marks and add small quantities of a compatible product if necessary. Both too little and too much oil can cause problems. Regular changes restore the lubricant’s properties.
  • Change the oil and filter according to the time or mileage intervals and operating conditions in the manual. There is no universal figure for all motorcycles; check for leaks and abnormal consumption even if the next service is not yet due.
  • If bluish smoke appears, you must consider that oil may be burning and arrange a diagnosis. Brief white vapour on a cold start can be condensation; persistent smoke, fluid loss or overheating require investigation of the cause, without diagnosing a component solely from the colour.
  • Collect used oil without pouring it onto the ground, into drains or into water, and hand it over through an authorised waste management scheme. Do not mix it with other fluids or put it in a cooking oil collection container. [RD 679/2006, arts. 5 and 6](https://www.boe.es/buscar/act.php?id=BOE-A-2006-9832#a5).

7Air and liquid cooling

A helmeted motorcyclist waits beside her motorcycle parked in a lay-by while the engine gives off heat and the radiator cap remains closed.
The key idea

Look after your cooling system and check coolant with the engine cold.

Engine coolingHow it removes heat
AirThrough surfaces and fins
LiquidCarries heat to the radiator

Remember

  • Clean cooling fins with the engine stopped and cold.
  • Check coolant when cold and keep it between the marks.
  • Use specified coolant; matching colours do not mean products can mix.
  • Do not open a hot pressurised cooling circuit: you could be burnt.
  • If temperature rises too high, stop safely and follow the manual.
  • After starting, ride gently when the manual allows.

Exam trap: Wrong: open a hot radiator to check it. Right: never open the pressurised cooling circuit when hot.

Read the full explanation
  • Cooling maintains operating temperature and prevents damage from excessive heat. An air-cooled engine releases heat through its surfaces and fins; a liquid-cooled engine carries it to a radiator. Follow the maintenance specified for your motorcycle’s system.
  • On a naturally air-cooled engine, you must keep the fins clean and their air passages clear. Clean them with the engine stopped and cold, without damaging them.
  • In liquid cooling, the pump circulates coolant, hoses carry it, the radiator releases heat to the air and the thermostat regulates flow according to temperature. The fan helps when airflow is insufficient.
  • Check the expansion tank level when cold, between the marks and following the manual. Use the specified coolant, which also protects against corrosion and freezing; do not routinely replace it with water or mix fluids merely because they are the same colour.
  • Do not open the pressurised cooling circuit cap when hot: liquid or steam can burn you. If the temperature becomes excessive, you must stop safely and follow the manual. The cause of overheating requires diagnosis.
  • After starting, begin riding gently when the manual allows and increase demands progressively, avoiding heavy loads on a cold engine.

8Clutch and gearbox

A helmeted motorcyclist rides to the right on a green manual motorcycle, with the left hand on the clutch lever and the left boot beside the gear selector.
The key idea

Coordinate your clutch and gears to transfer movement smoothly.

Unsuitable gearWhat you may notice
Too low when changing downEngine speed may rise too high
Too highJerking or poor response

Remember

  • With conventional controls, squeeze the left lever to disconnect engine and transmission.
  • Release it smoothly while coordinating the throttle.
  • Check your motorcycle's gear pattern.
  • Arrange inspection if the clutch slips or makes gear changes difficult.
  • Never descend in neutral or with the clutch held disengaged.
  • An automated clutch does not always mean automatic gear selection.

Exam trap: Wrong: a low gear increases engine power. Right: it multiplies torque, the available turning force.

Read the full explanation
  • The clutch allows you to connect or disconnect the engine and transmission progressively. With a conventional manual clutch, squeezing the left lever disengages the clutch and releasing it engages it; you must coordinate it with the throttle to set off without jerking or stalling the engine.
  • The gearbox selects ratios between engine speed and wheel rotation. A low gear multiplies the available torque more, in exchange for a lower wheel speed at the same engine speed. The available power comes from the engine.
  • In a conventional layout, you operate the gear selector with your left foot; from neutral, you normally press down for first gear. You must check your motorcycle’s shift pattern: gears are usually selected sequentially, and neutral is not equivalent to holding the clutch lever in.
  • Check the free play and condition of the clutch cable if fitted, or the hydraulic circuit if it uses that control system. A clutch that slips, drags or makes gear changes difficult requires inspection; compensating by continually slipping the clutch increases heat and wear.
  • Too low a gear can cause excessive engine speed when changing down; too high a gear can cause jerking or poor response. On descents, engine braking helps reduce the work of the brakes, but you must not descend in neutral or with the clutch held disengaged.
  • Automating clutch operation does not necessarily mean gear selection is automatic. On scooters, you may find a continuously variable transmission and centrifugal clutch: you must identify the system fitted to your vehicle.

9Final drive and chain

A crouching man uses a gloved hand to check the chain slack of a stationary motorcycle resting on its side stand outside a garage.
The key idea

Check and lubricate your chain with the engine stopped, following the manual.

Remember

  • The final drive carries movement to the driven wheel, usually at the rear.
  • Check chain slack, wear and lubrication.
  • Measure at several positions, using the specified load and motorcycle position.
  • Use suitable products and keep them off brakes and tyres.
  • Always stop the engine before cleaning or lubricating the chain.
  • Use a workshop for damage or maintenance you cannot safely carry out.

Exam trap: Wrong: tighten the chain until all slack disappears. Right: keep the slack specified for your model.

Read the full explanation
  • The final drive transmits motion to the driven wheel, normally the rear wheel. You may find a chain, belt or shaft drive; each system requires its own checks and maintenance products. Its condition determines whether engine power reaches the wheel smoothly and safely.
  • Regularly check the chain’s slack, wear, condition and lubrication according to the manual. It needs some free play: adjust it if excessive or insufficient, without tightening it until all slack disappears.
  • Check the chain slack and exact procedure for your model: the measuring point, motorcycle position and load specified for the check matter. Measure at several chain positions and follow the manual’s criteria if readings differ. A figure from another model can lead to incorrect adjustment.
  • Clean and lubricate with products and at intervals suitable for that type of chain; do not use petrol as a universal cleaner or just water without lubrication. Keep the product away from tyres and brakes. Do this with the engine stopped, never with the engine driving the chain.
  • Check for variations in tension, seized links, damage and wear to the chain and sprockets: adjustment or lubrication cannot repair every defect, and replacement may be necessary. If you lack the knowledge or tools, use a workshop.

10Belt, continuously variable transmission and shaft drive

A person crouching beside a parked green motorcycle consults a manual with drawings of the motorcycle and its toothed belt drive, visible beside the rear wheel.
The key idea

Identify your transmission and follow its specific maintenance instructions.

Transmission systemWhat you must check
Final-drive beltCondition, damage and tension as the manufacturer specifies
Scooter variatorScheduled replacement of belt, rollers and other parts
Shaft driveLeaks, play, noises, lubricant and protective gaiters

Remember

  • Check procedures, intervals and tightening torques before adjusting parts.
  • Do not put chain grease on a belt.
  • Have noises or poor response checked.
  • Check the result of any work before riding.

Exam trap: Wrong: maintain every transmission like a chain. Right: each system needs its own checks and products.

Read the full explanation
  • A toothed final-drive belt transmits rotation to the wheel with different needs from a chain. You must check its condition, damage, tension and maintenance according to the manufacturer; do not apply chain grease to the belt or assume every belt operates with the same slack.
  • In a scooter transmission, the variator belt runs between pulleys that change the ratio. You must follow the specified replacement schedule for the belt, rollers and other components. Arrange an inspection if there are noises or loss of response.
  • Shaft drive transmits rotation through an articulated shaft and usually a final-drive gear unit. Check leaks, free play, noises and the final-drive lubricant according to the manual. The gaiters protect the joints: a split allows dirt to enter and requires inspection.
  • Before buying products or adjusting parts, identify in the manual the operations, intervals and tightening torques for your model’s transmission; check the result of any work before riding.

11Brakes and load transfer

A motorcyclist wearing a helmet and protective gear brakes a motorcycle in a straight line with the right hand on the brake lever and the right foot on the brake pedal, within the right-hand lane of a Mediterranean road.
The key idea

Use both brakes smoothly and adapt your braking force to the available grip.

two devicesMotorcycle braking
VehicleRequired brakes
Motorcycle, including with sidecarTwo devices: one acts on at least the rear wheel; another on the front. This rule does not require braking the sidecar wheel.
Three-wheeled vehicle with symmetrical wheelsTwo independent service systems that together brake all wheels; or service braking on all wheels plus secondary braking. Always a parking brake, which may also provide secondary braking.

Remember

  • Use both brakes together and increase force smoothly.
  • In straight-line braking with good grip, the front brake usually works harder.
  • The rear brake also slows you down and helps control.
  • Do not continue if your brakes lose significant effectiveness.
  • Accelerating forwards on level ground increases the load on the rear wheel.
  • Use the throttle smoothly: excessive acceleration can lift the front wheel.

Exam trap: Wrong: always split braking force equally. Right: adapt force to grip, load, the system and the manual.

Read the full explanation
  • You must have two braking devices: one acting on at least the rear wheel and another on the front wheel; if a sidecar is fitted, this provision does not require braking its wheel. Retain the approved configuration. [RGV, art. 12.8.4](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a12).
  • If you ride a three-wheeled vehicle with symmetrically arranged wheels, it needs two independent service braking systems which, used simultaneously, brake all wheels, or one service braking system acting on all wheels and a secondary braking system; in both cases it needs a parking brake, which may also serve as the secondary brake. [RGV, art. 12.8.5](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a12).
  • You can recognise a disc brake by the disc near the wheel centre; it is common at the front and also used at the rear, while other motorcycles have a drum on one wheel.
  • When braking in a straight line, load transfers forwards: in normal conditions with good grip, the front wheel and brake usually take most of the braking effort. The rear brake also reduces speed and helps control.
  • Use both brakes together, smoothly and progressively, adapting force to grip, load, the system and the manual. The appropriate distribution varies with these conditions.
  • Check brake response: an unusually soft or spongy feel, or excessive free play, requires inspection. Do not continue riding with a significant loss of effectiveness.
  • Your posture during braking affects how you brace your body against inertia; see the “Motorcycle riding techniques” module, “Brake with both brakes”.
  • When accelerating forwards on a level road, load transfers to the rear wheel and decreases at the front. The distribution of forces supported by the wheels changes. Transfer depends on acceleration and configuration: excessive acceleration can lift the front wheel, but this does not always happen. Apply the throttle progressively.

12Disc brakes, drum brakes and hydraulic maintenance

A mechanic inspects the front disc brake and hydraulic hose of a green motorcycle resting on a stand in a workshop beside a road.
The key idea

Check brake wear and find the cause of any brake fluid loss.

BrakeParts that rub
DiscPads press against the disc's faces
DrumShoes rub against the drum's inner surface

Remember

  • Fluid transfers pressure in hydraulic brakes.
  • Check its level between the marks, in the specified position.
  • If the level falls, have wear and possible leaks checked.
  • Use only specified fluid and replace it as the manufacturer requires.
  • Conventional brake fluid absorbs moisture and can become less resistant to heat.
  • Keep oil and grease away from braking surfaces.

Exam trap: Wrong: topping up repairs fluid loss. Right: find the cause; there may be wear or a leak.

Read the full explanation
  • In a disc brake, the pads housed in the calliper press against the faces of the disc rotating with the wheel. In a drum brake, the shoes rub against its inner surface. This lets you identify the friction components whose wear needs checking in each system.
  • Friction converts the energy of motion into heat. The exposed disc helps dissipate it, although it can overheat; effectiveness also depends on tyres, grip and the condition of the whole assembly.
  • In a hydraulic circuit, fluid transmits pressure from the control to the calliper or cylinder. You must check the reservoirs, normally associated with each circuit, in the specified position and between their marks. Identify the reservoir by its markings and the manual.
  • A falling level can accompany pad wear or indicate a leak. You must establish the cause and use only the specified fluid; topping up without inspection does not repair the circuit and can hide a dangerous defect.
  • Have pad, shoe and disc wear checked, along with brake hoses, connections and possible leaks. Arrange a diagnosis of the whole system when you detect abnormalities.
  • Conventional brake fluid can absorb moisture, lowering its boiling resistance and encouraging vapour formation when heated. You must replace it according to the manufacturer, without applying a universal interval; keep grease, oil and incompatible cleaners away from friction surfaces.

13ABS, rain and wet brakes

A motorcyclist wearing a helmet and protective clothing rides to the right in their lane on a wet road in the rain, with clear space ahead.
The key idea

Know your braking aids and adapt your braking when it rains.

SystemWhat it does
ABSRegulates pressure to prevent locking on the wheels it controls
Combined braking or CBSShares braking between wheels when you use a particular control; does not guarantee against locking

Remember

  • Check which wheels your motorcycle's ABS controls.
  • Keep safe margins even with ABS.
  • On wet roads, adapt braking to the reduced grip.
  • Dry wet brakes by braking gently at low speed, only when safe.
  • Follow the manual and check that braking effectiveness returns.
  • If effectiveness does not return, stop and request assistance.

Exam trap: Wrong: ABS prevents every fall and always shortens stopping distance. Right: it guarantees neither grip nor shorter stops on every surface.

Read the full explanation
  • ABS regulates braking pressure to prevent the wheels it acts on from locking; it helps maintain stability and steering ability during hard braking. Know which wheels your motorcycle’s system controls. [DGT, reckless motorcycle riding](https://www.dgt.es/export/sites/web-DGT/.galleries/downloads/nuestros_servicios/permisos-de-conducir/recupera-puntos/MANUAL-CONDUCTAS-IMPRUDENTES-EN-MOTOCICLETA-DGT-INTRAS.pdf).
  • ABS does not guarantee grip, freedom from falls or a shorter stopping distance on every surface. You must maintain adequate margins and retain its approved configuration.
  • On wet roads, you must adapt your braking to the reduced grip; see the “Motorcycle riding techniques” module, “Gradients and slippery surfaces”.
  • After a puddle, rain or washing, wet brakes can lose effectiveness. Slow down cautiously and, at low speed and when safe, apply them gently to help dry them according to the manual. Check that they recover; if effectiveness does not return, stop and request assistance.
  • Combined braking or CBS distributes braking between the wheels when you use a particular control; you must know your model’s specific response. It is not equivalent to ABS: combining brakes does not guarantee prevention of wheel locking, and having ABS does not necessarily mean one control activates both brakes.

14Steering, bearings and wheels

A helmeted motorcyclist inspects a damaged front wheel rim on their motorcycle stopped beside the right-hand kerb, with a pothole behind it.
The key idea

Check steering and wheels without dangerous tests while riding.

BearingsLocation
SteeringIn the headstock and on the steering stem
WheelIn the wheel itself

Remember

  • Check handlebars turn smoothly, without stiff spots or abnormal play.
  • Check cables and hoses do not restrict steering.
  • Have qualified staff adjust steering.
  • Have vibrations or pulling to one side investigated.
  • Check rims, valves, fastenings and spokes if fitted.
  • After an impact, check for damage before continuing.

Exam trap: Wrong: let go of the handlebars to test steering. Right: investigate problems through safe inspection.

Read the full explanation
  • Check that the handlebars turn smoothly, without stiff spots or abnormal play, and that cables and hoses do not restrict them. A small movement steers the front wheel. Have steering adjustments carried out by qualified personnel.
  • The steering bearings operate in the headstock and on the steering stem, beside the yoke assembly that holds the forks. Distinguish their play from play in the wheel bearings themselves.
  • Check steering operation and play according to the manufacturer’s procedure; if you do not know how to support or lift the motorcycle safely, have a workshop carry out this check.
  • Vibrations, pulling to one side or difficulty turning can come from tyres, wheel balance, a damaged rim, alignment or steering. You must investigate the cause as a whole, without letting go of the handlebars while riding to test whether the motorcycle tracks straight.
  • Visually check rims, valves and fastenings, and spokes if fitted. After hitting a pothole or kerb, check for damage before continuing: a tyre retaining air does not prove that the rim or bearings are intact.

15Suspension and load adjustments

A motorcyclist uses a spanner to adjust the rear shock preload of a motorcycle parked beside the road, with luggage secured and a passenger waiting with her helmet.
The key idea

Check your suspension and adjust it for the load as your manual explains.

Suspension partFunction
SpringsSupport loads
DampersControl bouncing movements

Remember

  • Check front and rear suspension.
  • Have leaks, bouncing, noises or unusual sag checked.
  • Keep fork oil off the brake and tyre.
  • With passengers or luggage, check suspension settings and tyre pressures.
  • Adjusting suspension does not allow you to exceed the permitted load.
  • Preload changes the spring's working position, not automatically its stiffness.

Exam trap: Wrong: stiffer suspension always improves control. Right: excessive adjustment can worsen its response; follow the manual.

Read the full explanation
  • Suspension absorbs irregularities and helps keep the wheels in contact with the road. Springs support loads and dampers control their oscillations; you must distinguish these functions from steering movement and reducing speed with brakes.
  • Telescopic forks normally form part of the front suspension; at the rear, you may find a swingarm and one or more shock absorbers. You must check both ends: faulty rear suspension impairs contact, stability and control even if the front works correctly.
  • Leaks from forks or shock absorbers, persistent bouncing, abnormal sag, noises or uneven wear require inspection. Fork oil must not reach the brake or tyre; you must also attend to dust seals, oil seals and prescribed maintenance.
  • With a passenger or luggage, you may need to adjust preload and other permitted settings, as well as tyre pressures. You must follow the manual: indiscriminately increasing stiffness or damping can worsen the response, and an adjustment does not authorise you to exceed the permitted load.
  • Preload adapts the spring’s working position to the load and does not automatically change its stiffness. You must check that the motorcycle retains appropriate suspension travel and geometry; correct adjustment helps control and comfort, but does not guarantee grip on every surface.

16Tyre pressure and temperature

A kneeling motorcyclist measures the front tire pressure of a motorcycle parked beside the kerb using a pressure gauge.
The key idea

Measure tyre pressure when cold and use the value specified for your load.

SituationWhat you must do
Cold tyreMeasure and compare with the specified pressure
Tyre heated by ridingDo not deflate it to match the cold value
Passenger and permitted luggageUse the manufacturer's pressures for that load

Remember

  • Use a pressure gauge: looking at the tyre is not enough.
  • Check the pressure specified for your motorcycle and intended load.
  • Check pressure even when you only make short journeys.
  • Do not release air from hot tyres to match cold pressure values.
  • Check both tyres, although the rear usually wears more.
  • Have repeated pressure loss investigated: check the valve, tyre and rim.

Exam trap: Wrong: lower pressure for grip or overinflate to save fuel. Right: use the manufacturer's specified pressure.

Read the full explanation
  • Tyres provide contact with the ground. Their condition, pressure and tread affect grip, stability, manoeuvrability and braking distance. Heavily worn tread drains water less effectively and increases the risk of losing control in rain; pay particular attention to tyre condition before riding in wet conditions.
  • Maintain the pressure specified for your motorcycle and intended load, checking it according to the manual. Incorrect pressure can cause abnormal wear and instability; it matters even on short journeys. Do not overinflate to save fuel or arbitrarily lower pressure to increase the contact patch.
  • Measure with a pressure gauge and cold tyres, before riding warms them up. Heating raises pressure: do not release air from a hot tyre to match the specified cold value; visual inspection does not replace measurement.
  • Before a long journey with a passenger and the maximum permitted luggage, apply the pressures the manufacturer specifies for that load; extra weight may require different values from those for riding alone.
  • The steered wheel is usually the front wheel and the driven wheel the rear. The rear tyre usually wears more because it transmits driving force. This is not inevitable: compound, pressure, load, route, acceleration, braking and use all affect wear. Check both wheels.
  • Establish a measurement routine and record values if it helps you detect losses: repeated pressure loss requires inspection of the valve, tyre and rim, even if inflation restores the pressure. Arrange a check if you suspect a leak.

17Tyre tread, damage and replacement

A helmeted person crouches beside a green motorcycle parked next to the kerb and checks the front tyre tread.
The key idea

Check tread and damage without applying other vehicle categories' minimum depths to your motorcycle.

1.6 mmMinimum: M1, N1, O1, O2
Vehicle categoryTread depth rule in cited annex
Category L motorcycleNo numerical minimum; follow wear indicators and manufacturer criteria
M1, N1, O1 and O2Minimum 1.6 mm

Remember

  • Use approved tyres or accepted equivalents.
  • Follow wear indicators and replacement instructions.
  • Check the whole tread for exposed cords, cracks and bulges.
  • With new tyres, increase demands gradually as their instructions explain.
  • Do not warm tyres by weaving or change pressure without reason.
  • Use puncture kits only for compatible tyres and damage; respect their limits.

Exam trap: Wrong: your motorcycle must meet the 1.6 mm minimum for other categories. Right: the cited annex sets no such minimum for category L.

Read the full explanation
  • Your category L motorcycle’s tyres must have the approved dimensions and characteristics or accepted equivalents. Annex VII.2 does not set a numerical minimum tread depth for this category; the 1.6 mm applies to M1, N1, O1 and O2. Check wear using the criterion applicable to your tyre. [RGV, Annex VII.1 and 2](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anvii).
  • On your motorcycle, you must follow the wear indicators and the manufacturer’s replacement criteria, checking the entire tread. Tyres must retain their markings and be free from exposed cords, cracks, bulges, splits or separation of plies or tread. [RGV, Annex VII.4](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anvii).
  • Central wear can relate to straight-line use or excessive pressure, and shoulder wear to other conditions, but you must avoid a single diagnosis based on wear pattern. Pressure, compound, load, geometry, acceleration and braking all have an effect; checking both wheels is necessary.
  • Tread helps drain water, but loss of contact over standing water also depends on other conditions; see the “Motorcycle risks and prevention” module, “Standing water and aquaplaning”.
  • With new tyres, you must increase demands progressively according to the instructions for use, without sudden acceleration, hard braking or abrupt lean angles. Do not warm them by weaving or arbitrarily changing pressure: there is no universal distance that guarantees maximum grip.
  • Avoid contact between rubber and fuel, oils or solvents. After a puncture, use a kit only if compatible with the tyre and damage, and respect its limits; a sealant cannot repair every cut or automatically turn a temporary solution into a permanent one.

18Tyre markings and fitting

A mechanic mounts a tyre onto a motorcycle rim using a tyre-changing machine, beside a raised motorcycle in a workshop.
The key idea

Understand your tyre's markings and check that its fitting is compatible.

120 mmExample width
70 %Height compared with width
17 inchesExample rim diameter
four digitsManufacturing week and year
Tyre markingMeaning
120/70 R 17Width: 120 mm; height: 70 % of width; radial; rim: 17 inches
TubelessDesigned for use without an inner tube
Tube typeDesigned for use with an inner tube

Remember

  • Find recommended pressure in the manual, not the tyre size marking.
  • The load index gives capacity, not your motorcycle's actual weight.
  • The speed symbol does not give your permitted riding speed.
  • The manufacturing date does not set a universal expiry date.
  • Follow the marked rotation direction and specified front or rear position.
  • Check permission before swapping wheels or mixing tyre constructions.

Exam trap: Wrong: the date shows when the tyre was fitted. Right: its four digits show the week and year of manufacture.

Read the full explanation
  • In a marking such as 120/70 R 17, you must interpret a nominal width of 120 mm, a height-to-width ratio of 70 %, radial construction and a rim diameter of 17 inches. Identify the recommended pressure separately in the manual. [UNECE Regulation 75, paras. 2.16 and 3.1.3](https://www.boe.es/buscar/doc.php?id=DOUE-L-2011-80563).
  • The load index expresses a capacity through a table, and the speed symbol a performance category; they are not the motorcycle’s actual weight or its permitted speed. You must choose characteristics compatible with type approval, as well as suitable dimensions.
  • The date is identified by four digits: the first two indicate the week and the last two the year of manufacture. The date shows when the tyre was made; fitting and wear are assessed separately. Check its condition and the manufacturer’s replacement guidance, without assigning a universal expiry date. [UNECE Regulation 75, para. 3.1.8](https://www.boe.es/buscar/doc.php?id=DOUE-L-2011-80563).
  • The markings tubeless and tube type identify construction for use without or with an inner tube; you must respect compatibility between the rim, tyre, valve and, where applicable, inner tube. Check the specifications before fitting the assembly.
  • Respect the marked direction of rotation and front or rear position where the manufacturer distinguishes them. The two wheels may have different sizes; you must not interchange them because they look similar, or mix constructions or combinations without checking that they are permitted.

19Ignition and battery types

A person checks the fastening and terminals of the sealed battery beneath the raised seat of a green motorcycle parked in a paved area beside the road.
The key idea

Care for your battery and spark plug according to their type and the manual.

Battery typeMaintenance
Sealed or maintenance-freeDo not open it to refill
Maintenance permittedCheck fluid and add water only as the manufacturer instructs

Remember

  • Check your battery, mounting and terminals even with a kick-start.
  • Only top up water if the design and manufacturer allow it.
  • Do not open sealed batteries to refill them.
  • Do not add acid as routine maintenance.
  • Check and replace the spark plug as the manual requires.
  • The electric starter uses the battery to begin turning the engine.

Exam trap: Wrong: every ignition spark needs a separate battery. Right: self-contained magneto ignition can work without one.

Read the full explanation
  • In a self-contained magneto ignition system, the engine-driven magneto generates the electrical energy for the spark. This system can work without a separate battery for ignition. The motorcycle may have a battery for other equipment.
  • If a battery is fitted, check its condition, mounting, terminals and maintenance according to its type and the manual, even if you have a kick-start as well as electric starting. Follow the procedures specific to that battery.
  • Only check electrolyte and top up with water when the design and manufacturer allow it. Do not open a sealed or maintenance-free battery to refill it, periodically add sulphuric acid or replace the electrolyte as routine maintenance.
  • You must check the spark plug type, condition and replacement interval according to the manual; a deteriorated plug can cause misfiring. The electric starter motor uses the battery to begin turning the engine.

20Electrical charging, fuses and storage care

A mechanic holds a fuse beside the open fuse box of a parked motorcycle, with another fuse of the same color in a tray.
The key idea

Protect your electrical system with suitable fuses and chargers.

Electrical partFunction
AlternatorGenerates electricity when the combustion engine turns
Regulator-rectifierAdapts electricity for equipment and charging
BatteryStores energy

Remember

  • Avoid short circuits with tools when checking terminals.
  • Use a compatible charger for lithium batteries.
  • Stop charging and arrange inspection for swelling, abnormal heat or leaks.
  • Replace fuses with the specified rating and find why they blow.
  • Follow the storage care plan when you leave your motorcycle unused.
  • Repeated brief starts do not guarantee the battery recovers its charge.

Exam trap: Wrong: bridge a fuse or fit a higher-rated one. Right: use the specified rating to protect the wiring.

Read the full explanation
  • On a combustion-engine motorcycle, the alternator generates electricity when the engine turns and the regulator-rectifier adapts its output to supply equipment and charge the battery. The battery stores the energy later used by the starter and other equipment.
  • Check that the terminals are secure and clean, and avoid short circuits with tools. If the procedure requires disconnection of a conventional negative-earth battery, you normally remove the negative terminal first and reconnect it last; always confirm the manual and the vehicle’s electronic requirements.
  • For lithium batteries, use a charger compatible with their technology and protection systems. Check temperature and storage instructions and inspect the casing for damage or swelling. If there is deformation, abnormal heating or leakage, stop charging and arrange specialist inspection.
  • Fuses protect circuits against overcurrent. You must replace them with the specified rating and establish why they blow; bridging them or fitting a higher-rated fuse can leave wiring unprotected and cause damage.
  • If the motorcycle remains unused, you must follow the battery storage care plan and use a compatible maintenance charger when recommended. Repeated very brief starts do not guarantee replacement of the energy consumed and can leave the battery flat when you need to set off.

21Fault warning lights and initial checks

A helmeted motorcyclist is stopped beside the right-hand kerb and operates the engine stop switch while looking at the illuminated oil warning light on the motorcycle dashboard.
The key idea

Read each warning using your manual and act on possible faults.

Persistent warningWhat you must know
Oil pressure with engine runningLubrication may fail even with the correct oil level
Battery charging with engine runningGeneration or charging may be faulty
ABS after its expected checkABS may be unavailable; conventional braking may still work
Engine managementRead the symbol and symptoms; colour alone does not identify the fault

Remember

  • Know which warning lights come on during their initial check.
  • If oil pressure stays lit with the engine running, stop safely and switch off.
  • With excessive temperature, stop safely and follow the manual.
  • Have persistent charging warnings checked with the engine running.
  • If ABS stays lit after its check, take extra care and arrange inspection.
  • For engine warnings, follow the instructions for that specific situation.

Exam trap: Wrong: a correct oil level lets you ignore an oil pressure warning. Right: correct level does not rule out low pressure.

Read the full explanation
  • When you switch on the ignition, warning lights may come on to check their operation and go out after starting or self-diagnosis. You must know the meaning of each symbol and your model’s instructions.
  • The oil pressure warning indicates a lubrication problem when it stays on with the engine running. You must stop safely and switch off the engine according to the manual; it does not necessarily measure the level, and a correct level does not rule out insufficient pressure.
  • If an excessive temperature warning appears, stop safely and follow the cooling procedure explained in “Air and liquid cooling”. The symbol may be accompanied by a gauge or message: consult the manual to interpret the warning and decide whether you need assistance.
  • A battery charging light that stays on with the engine running can reveal a generation or charging fault, even if the motorcycle still starts. You must have it checked. Check the charging system before deciding which component to replace.
  • An ABS warning that remains after the expected process may indicate that the function is unavailable. You must follow the manual, take extra care and arrange inspection. Conventional braking may still work, depending on the fault.
  • An engine management warning requires you to interpret whether it is steady, flashing or accompanied by running problems. You must follow the specific instruction, especially with loss of power, noise, smoke or abnormal temperature; colour alone does not authorise you to continue or identify the faulty component.

22Lighting, mirrors and external checks

A helmeted rider operates the brake of a motorcycle stopped beside the kerb while another person checks that the rear brake light illuminates.
The key idea

Check lights, mirrors and external parts before riding.

Equipment or situationCheck or requirement
Convex mirrorWider view, but images look smaller and further away
Windscreen you must look through to see aheadWipers and washers required; check they work
Vehicle with seat beltCheck webbing, anchorages, buckle, retraction and locking; repair faults before using that seat
Two-wheeled motorcycleNo requirement to carry a spare wheel or spare bulbs

Remember

  • Check external lights: a dashboard indicator does not guarantee they work.
  • With conventional brakes, check the brake light using each control separately.
  • Adjust mirrors from your riding position and check blind spots directly.
  • Check fastenings and parts that could interfere with steering or controls.
  • Carry a high-visibility reflective vest on your two-wheeled motorcycle.
  • Wear it when dismounting onto an interurban road's carriageway or hard shoulder.

Exam trap: Wrong: any noise from the horn is enough. Right: check for a sustained, steady sound of sufficient volume.

Read the full explanation
  • Before riding, you must check that lights and indicators work and that the devices are clean and secure. Check the brake light by operating each control separately on a conventional system.
  • Check lamps, connections and control response without dazzling anyone or carrying out dangerous tests. A working dashboard indicator does not always guarantee that the external lamp illuminates; observe the actual response or ask another person to help.
  • From your normal riding position, you must adjust the mirrors to see behind and to the sides, checking their mounting and vibration. A convex mirror widens the field of view but makes images smaller and apparently further away; supplement your observation with a direct blind-spot check.
  • Check the seat, fairing, footrests, stands and accessories so that they do not loosen or interfere with steering and controls. Check for cracks, missing screws, loose parts and any rubbing as you turn the steering from lock to lock.
  • On your two-wheeled motorcycle, you must carry a high-visibility reflective vest that meets personal protective equipment requirements and put it on when you dismount and enter the carriageway or arcén (hard shoulder) of an interurban road; you are not required to carry a spare wheel or spare bulbs. See also the “Motorcycle lights and signals” module. [RGV, Annex XII.3](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#anxii) and [RGC, art. 118.4](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a118).
  • If the windscreen requires you to look through it to see the road ahead, the vehicle must have windscreen wipers and washers. Check the reservoir, pipes and fluid outlet; a missing or misdirected jet can indicate lack of fluid, blockage or a fault. Check that the blades wipe without leaving streaks, juddering or scratching: split, hardened or detached rubber and loose arms need repair. [RGV, art. 11.4](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a11).
  • If the vehicle has a seat belt, check the webbing, anchorages, buckle and retractor. The webbing must be free from cuts, fraying or burns; check that the buckle holds and releases correctly and that the retractor takes up the webbing. Verify locking according to the manual: if it fails, the anchorages have play or there is damage, arrange repair before using that seat. [RGCond, Annex V.B.1.14.ª](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#anv).
  • Check that the horn responds to its control with a sustained, steady sound of sufficient volume; a weak, intermittent or absent sound requires inspection of the device and its power supply. For rules on use, see the “Preventive and efficient motorcycle riding” module. [RGV, art. 11.7](https://www.boe.es/buscar/act.php?id=BOE-A-1999-1826#a11).

23Exhaust, catalytic converter and refuelling

A motorcyclist refuels a green motorcycle with its lights off and holds the key removed from the ignition at an outdoor petrol station.
The key idea

Maintain your exhaust and switch off the engine and electrical equipment before refuelling.

Exhaust partFunction
SilencerReduces noise
Catalytic converterReduces certain pollutants

Remember

  • Never ride with an unsilenced exhaust or an unsuitable, incomplete or damaged silencer.
  • Check the exhaust without touching it when hot.
  • Do not keep the engine running in places without adequate ventilation.
  • Before refuelling, switch off engine, lights, electrical systems and transmitters like mobile phones.
  • Avoid spills and overfilling; close the cap securely.
  • If you choose the wrong fuel, keep the engine off and ask for help.

Exam trap: Wrong: self-service lets you refuel with engine or lights on. Right: switch them off, along with the other specified systems and devices.

Read the full explanation
  • The silencer reduces noise and the catalytic converter reduces certain exhaust pollutants. You must not ride with an unsilenced exhaust or an incomplete, unsuitable or deteriorated silencer. [RGC, art. 7.2](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a7).
  • Check exhaust mountings, leaks, corrosion and damage without touching it when hot. Exhaust gases can cause poisoning in enclosed places: do not keep the engine running for checks in a space without adequate ventilation.
  • To refuel, you must stop the engine and switch off lights, electrical systems such as the radio and transmitting devices such as your mobile phone, including at self-service pumps; see the “Motorcycle lights and signals” module, “Stopping in a tunnel and refuelling”. [RGC, art. 115.3 and 4](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a115).
  • Avoid spills and overfilling, close the cap securely and follow the station’s instructions. If fuel spills onto the motorcycle, deal with it before starting; pay particular attention to protecting hot surfaces and contact areas. If you have selected the wrong fuel, keep the engine off and ask for help.

24Electric motorcycles and preparing for a journey

A motorcyclist checks the front tyre pressure of an electric motorcycle parked beside the kerb using a pressure gauge, with a travel bag secured behind the seat.
The key idea

Prepare for each journey and check your motorcycle after a fall or prolonged storage.

Motorcycle motorWhat you must remember
ElectricBattery supplies the motor through electronics; check charge and range
PetrolHas a piston cycle and engine oil maintenance

Remember

  • On electric motorcycles, check charge and expected range.
  • Also check brakes, tyres and any transmission fitted.
  • Energy recovery does not replace friction brakes.
  • Leave high-voltage wiring and components alone.
  • With passengers or luggage, make specified adjustments even when weight is balanced.
  • After washing, falls or storage, check controls, brakes, steering, wheels, lights and leaks.

Exam trap: Wrong: starting after a fall proves you can continue. Right: check your motorcycle; request assistance for damage, doubt or inability to check safely.

Read the full explanation
  • On an electric motorcycle, the traction battery supplies the motor through power electronics. You must check charge and expected range, as well as brakes, tyres and any transmission fitted; it has neither the piston cycle nor the engine oil maintenance of a petrol engine.
  • Energy recovery during deceleration can produce a braking effect, but it depends on the system, settings and state of charge. You must know its response without assuming it replaces friction brakes; you must also leave high-voltage wiring and components alone.
  • Before a long journey, you must check outstanding maintenance, fluid levels, transmission and pressures for the actual load. A passenger and luggage change load distribution, steering and braking; make the adjustments specified by the manufacturer even if the load is balanced.
  • After washing, prolonged storage or a fall, you must check controls, brakes, steering, wheels, lights and leaks before riding again. Being uninjured or being able to start the motorcycle does not prove that it is safe; if there is damage, doubt or no way to check it safely, request assistance.

Check the motorcycle before setting off

Check the components that affect control, grip and operation.

  1. With the motorcycle stable, inspect tyres, wheels, damage and leaks; measure cold pressures for the load.
  2. Check fluid levels and transmission using the manual’s procedures, with the engine stopped where required.
  3. Operate the throttle, clutch, brakes and steering; check return action, feel and freedom from obstructions.
  4. Check lights, indicators, the brake light with each control and mirror adjustment.
  5. Start according to the manual and observe the warning lights; do not set off if there is a serious fault.

Measure and correct the oil level

The position and reading conditions depend on the model.

  1. Consult the manual to identify the sight glass or dipstick, position, temperature and waiting time.
  2. Stabilise the motorcycle on level ground; stop the engine and wait as instructed by the procedure.
  3. Read the level without confusing a reading taken while leaning with an actual shortage of oil.
  4. If you need to top up, use the specified product and add it gradually without exceeding the maximum.
  5. Close securely, check for leaks and dispose of any waste through the appropriate scheme.

Check the chain safely

Check slack, lubrication and wear without starting the engine.

  1. Stop the engine, remove the key and stabilise the motorcycle as instructed in the manual.
  2. Measure slack in the prescribed span and position, checking different areas by moving it manually and safely.
  3. Inspect links, seals, front sprocket and rear sprocket; detect seized links and abnormal variations in tension.
  4. Clean and lubricate with compatible products, without contaminating brakes or tyres or bringing your fingers near trapping points.
  5. If adjustment or replacement is needed, follow the procedure and its tightening torques or use a workshop; verify the result before riding.

Respond to a fault warning light

Interpret the warning without worsening a mechanical fault.

  1. Identify the symbol and whether it is part of the expected self-diagnosis or remains on when it should not.
  2. If it warns of oil pressure, overheating or a fault that compromises safety, stop in a safe place and follow the manual.
  3. Stop the engine when required; do not open hot circuits or handle dangerous components.
  4. Check only what you can inspect safely and request assistance if the cause persists or you do not know its extent.

Check what you know

Real questions from the bank on this topic. Pick an answer to see the explanation.

1Must a privately used motorcycle that is neither classified as historic nor used by a driving school undergo periodic inspection according to its age?
2Which lights must be switched on if you are riding a motorcycle on a road within a built-up area during daylight hours?
3The motorcycle driver is travelling during the day with the dipped headlights on. Is this behaviour correct?
4A motorcycle has an operational ABS system acting on both wheels. What is its main function during braking?

Finished this module?

Mark it as read and you will see your progress on the theory list.

Next module