Theory · A2 Licence - Motorcycle · Module 15 of 18

Motorcycle riding techniques

You learn to coordinate your posture, where you look and your use of the controls to balance, brake and negotiate bends safely. You practise the reasoning required in the A2 exam on overtaking, carrying a passenger, riding in a group, and closed-course and on-road manoeuvres.

38 min read25 sectionsReviewed Nov 3, 2026
A rider wearing a helmet and protective gear rides a green motorcycle within their lane on a curved road in a Mediterranean landscape.
Posture and vision for motorcycle control

1Prepare for control before setting off

A rider seated on a stationary motorcycle checks her reach to the controls with both feet on the ground while an instructor watches in a training area.
The key idea

Prepare your motorcycle and adapt your riding before setting off.

Remember

  • Check brakes, tyres, steering, lights and mirrors.
  • Check you can reach the controls without losing your riding position.
  • Adjust only what the manufacturer allows.
  • Check the handlebars and controls move freely.
  • Adapt your posture to the motorcycle’s design.
  • Learn new techniques with instruction in a suitable enclosed area.

Exam trap: Wrong: your car experience is enough. Right: learn motorcycle balance and controls.

Read the full explanation
  • You must adapt your riding to the combination of rider, motorcycle and surroundings. An A2 motorcycle can accelerate quickly and requires careful throttle control even though its power is restricted; knowing the route or having driving experience in a car does not replace learning how to balance and use its controls.
  • Before setting off, check that you can reach and operate the controls without losing your riding posture. Check the brakes, tyres, steering, lights and mirrors; with incorrect tyre pressure or a faulty control, a technique you have learnt may not produce the expected response. Detailed maintenance is covered in «Motorcycle mechanics and maintenance».
  • Adjust only the components designed to be adjustable, following the manufacturer's instructions: lever reach, mirror position and the adjustments provided for the load. Afterwards, check that the handlebars can turn freely and that the controls can move through their full travel; do not confuse making an adjustment with modifying the motorcycle yourself.
  • Choose a position that allows you to observe, breathe and move without unnecessary fatigue. A faired sports motorcycle, a touring motorcycle and a scooter have different ergonomics; you must not adopt the same forward lean on all of them or treat a sporty posture as permission to ride faster.
  • Practise new techniques under instruction and in a suitable enclosed area. The aim is to make smooth movements automatic so that you have attention available for traffic: you do not need to demonstrate the maximum lean angle or seek to trigger the electronic aids during a normal journey.

2Flexible posture and support

A motorcyclist rides to the right with head raised, arms bent, knees beside the fuel tank and feet on the footpegs, with both wheels inside the lane and clear of the edge line.
The key idea

Keep your body stable and your arms flexible.

Remember

  • Sit centrally, with your head up and shoulders relaxed.
  • Hold the grips without becoming stiff.
  • Position your wrist to close the throttle and reach the brake.
  • Keep your knees near the tank where the design allows.
  • Support your feet without pressing the gear lever or brake accidentally.
  • Keep a clear view and easy access to the controls.

Exam trap: Wrong: support all your weight on your hands. Right: also use your legs and body when braking.

Read the full explanation
  • You must sit centrally with stable support, without hanging on the handlebars. Keep your head up, shoulders relaxed and arms slightly bent; locking your elbows transmits jolts to the controls and makes corrections harder. Adapt your back position to the motorcycle's design without straining your neck or wrists.
  • Hold the grips firmly enough to maintain control, without gripping rigidly. Position your throttle wrist so that you can close the throttle and reach the brake without excessive twisting. Do not support yourself in a way that allows a jolt to open the throttle unintentionally.
  • Where the design allows, bring your knees close to the fuel tank to stabilise your body. When braking, you can resist some of the inertia with your legs and torso, avoiding putting all your weight on your hands.
  • Rest your feet on the footrests and avoid pointing your toes outwards or dragging them. You must be able to reach the gear lever and rear brake without losing stability, but without applying unintended pressure to them. On a scooter, use the foot supports and control layout provided.
  • Maintain a posture that allows you to turn your head and check the mirrors. Tucking in can reduce your exposure to the airflow, but you must not sacrifice your view or access to the controls. Your posture and handlebar height can affect aerodynamics even on small-capacity motorcycles; no fixed saving is guaranteed. [DGT, riding posture](https://www.dgt.es/export/sites/web-DGT/.galleries/downloads/nuestros_servicios/para-colaboradores-y-empresas/GUIA-MONITORES-MOTOCICLETA-NIPO.pdf)

3Identify each control

A rider wearing a helmet and protective gear checks the handlebar controls of a green manual motorcycle, stopped beside the right-hand kerb with both feet on the ground.
The key idea

Learn your model’s controls before riding.

On a conventional manual motorcycleControl you operate
Right handThrottle and front brake
Left handClutch
Left footGear lever
Right footUsually, rear brake

Remember

  • Check your motorcycle’s control layout.
  • Open and close the throttle gradually.
  • Learn where the clutch starts moving the motorcycle.
  • Release the clutch gradually.
  • Avoid holding the clutch in unnecessarily.
  • Learn the switches without looking down for long.

Exam trap: Wrong: look for a clutch pedal on a conventional manual motorcycle. Right: use the left lever.

Read the full explanation
  • On a conventional manual motorcycle, you operate the throttle and front brake lever with your right hand. Your left hand operates the clutch. Check how they feel before riding: the layout on a scooter or an adapted motorcycle may differ.
  • You select gears with your left foot and normally operate the rear brake with your right foot. From neutral, you usually select first gear by pressing the lever down; always follow your model's gear shift pattern.
  • The throttle regulates engine output, rather than controlling speed instantly and independently of the gear and gradient. Open and close it progressively: a sudden twist can cause a jerk, especially in low gears, with poor grip or with the handlebars turned.
  • The clutch allows you to transmit the engine's movement gradually. Learn to recognise the friction zone, where it starts to move the motorcycle, without releasing the lever abruptly. Do not ride unnecessarily with the clutch lever pulled in or rest on it in a way that causes continuous slipping.
  • You must also know the indicators, horn, lights, engine stop switch and how the stand works. Operating them must not require you to look down for a prolonged period. Switch locations and rider aids vary between models; operating the wrong control out of habit can cause an unexpected manoeuvre.

4Where to look and what to observe

A helmeted motorcyclist looks toward the bend while riding in the right-hand lane, with a pothole ahead near the right edge and clear space to its left within the lane.
The key idea

Look towards the path you want to follow.

Remember

  • In slow turns, look towards the exit space.
  • Spot the danger and find a path you can use.
  • Turn your head without pulling the handlebars.
  • Keep throttle, clutch and brake movements smooth.
  • Practise with an instructor if looking towards the exit changes your path.

Exam trap: Wrong: looking at the exit makes you avoid obstacles automatically. Right: you need space, grip and control.

Read the full explanation
  • Look towards the path you want to follow: in a slow turn, towards the space at the exit; when changing direction, towards the path you are going to create with the controls. Scanning ahead and nearby, and checking mirrors and blind spots, are covered in «Preventive and efficient motorcycle riding», in «Looking ahead and checking nearby» and «Blind spots and seeing each other».
  • Avoid fixing your gaze on the hazard. Identify the pothole, vehicle or edge, but immediately look for a usable path. Looking helps guide your movements; it does not make the motorcycle avoid obstacles by itself or allow you to pass through a space without grip or sufficient width.
  • Turn your head naturally without bringing your shoulders round or pulling on the handlebars. Where you look must allow you to guide the motorcycle while keeping your throttle, clutch and brake inputs smooth. If looking towards the exit changes your posture or sends the motorcycle off course, practise this coordination at low speed with an instructor.

5Moving off and balancing at low speed

A rider wearing a helmet and protective clothing rides a green motorcycle along a road bending to the right, with an upright posture, looking ahead and keeping their feet on the footpegs.
The key idea

Move slowly by coordinating throttle, clutch and balance.

Remember

  • On a manual motorcycle, combine moderate throttle with gradual clutch release.
  • Lift your feet onto the supports once you are moving steadily.
  • At walking pace, use gentle rear braking where appropriate.
  • In tight slow turns, steer towards your path and look towards the exit.
  • If you lose control, stop when necessary.
  • Avoid dragging your feet.

Exam trap: Wrong: a fixed speed keeps your motorcycle upright automatically. Right: actively control your balance.

Read the full explanation
  • To move off on a manual motorcycle, select the appropriate gear and combine moderate throttle with gradual clutch release. Look ahead and bring your feet onto the footrests once the motorcycle moves steadily. A burst of throttle does not compensate for an abrupt clutch release.
  • At walking pace, use the friction zone, steady engine output and, where appropriate, gentle rear braking to control your progress. Avoid alternating bursts of throttle with sharp braking. Keeping the clutch and brake working against each other for a long time can overheat them: learn the right degree of control for your model.
  • In a very tight turn at low speed, steer the handlebars towards your intended path and turn your head towards the space at the exit. Keep your body balanced and leave enough margin to avoid reaching full steering lock. Do not force a large lean angle as if you were riding through a bend on the road.
  • If you lose speed and balance, do not always try to rescue the manoeuvre with a lot of throttle. Make the manoeuvre less demanding, stop under control when necessary and prepare again. Letting your feet skim the ground can cause them to catch and does not replace learning to balance.
  • Rotating wheels produce gyroscopic effects, but stability also depends on geometry, masses and your corrections as the rider. At low speed, your control of the handlebars and your body is essential. You must actively maintain your balance: no universal speed guarantees that the motorcycle stays upright by itself or cannot fall over.

6Stopping and handling with the engine off

A helmeted motorcyclist holds a motorcycle upright beside the right-hand kerb, with the handlebars straight and one boot resting on firm asphalt.
The key idea

Stop and move your motorcycle with secure support.

Remember

  • Finish stopping with your motorcycle upright and handlebars straight.
  • Choose firm ground for your foot.
  • On a manual motorcycle, use the clutch in time to avoid stalling.
  • On hills, coordinate throttle, clutch and brake to avoid rolling backwards.
  • Push slowly from beside the motorcycle, with the engine off.
  • Park on stable ground and stop the engine before leaving your riding position.

Exam trap: Wrong: sharply apply the front brake with the steering turned while pushing. Right: avoid this, as you could lose balance.

Read the full explanation
  • Prepare to stop with your eyes ahead and slow down progressively. Aim to finish with the motorcycle upright, the handlebars straight and a planned foothold on firm ground. Look where you are going to put your foot: a cross slope, a hollow or gravel can make a seemingly easy foothold inadequate.
  • On a manual motorcycle, pull in the clutch lever in time to prevent the engine from stalling as you stop. Do not coast unnecessarily with the clutch lever pulled in: you must retain control of speed and drive until the stage when you need to disengage the clutch.
  • To move off on a slope, coordinate the clutch, throttle and brake so that you do not roll backwards. Release the brake when the transmission allows you to move forward under control. Do not hold the motorcycle for a long time solely by slipping the clutch; use the technique suited to its configuration.
  • To push it, stand beside it, control its weight and check the route beforehand. With the engine off and no power driving it, move it slowly and avoid leaning it further than you can support. Braking sharply with the front brake and the steering turned can unbalance it even at walking pace.
  • When leaving it stationary, choose a stable surface and correctly position the stand provided. Check that it cannot move accidentally and stop the engine before leaving the riding position. Do not rely on a stand resting on soft ground or on a slope that could cause the side stand to fold up. [RGC, art. 92](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a92)

7Brake with both brakes

A rider wearing protective gear operates the brakes of a green motorcycle on a dry road, with both tires inside the right-hand lane and clear of the edge line.
The key idea

Coordinate both brakes and increase pressure gradually.

BrakeWhat you must remember
FrontIncrease pressure without grabbing
RearControl pressure: the rear carries less weight during braking

Remember

  • Adapt your braking force to grip and your braking system.
  • On a straight with good grip, the front brake usually provides more braking.
  • Control rear brake pressure to avoid locking the wheel.
  • Keep your arms flexible.
  • Remember that stopping includes reacting and braking.
  • Have any loss of braking effectiveness checked before setting off.

Exam trap: Wrong: always apply equal force to both brakes. Right: adapt the balance to each situation.

Read the full explanation
  • As a general technique, coordinate both brakes and increase the force progressively according to grip and the braking system. The front brake usually provides most of the braking capacity in a straight line with good grip; the rear brake also slows you down and helps you maintain control. Using only the rear brake can increase your stopping distance.
  • When you brake, load transfers forwards and the rear becomes lighter. You must therefore avoid maintaining a fixed proportion of braking effort in every situation: grip, braking intensity, load and geometry vary.
  • Start applying pressure to the front brake without snatching the lever, and increase it as the motorcycle responds. Modulate the rear brake to avoid locking the wheel as it becomes lighter. Support your body using the available contact points and keep your arms relaxed, without relying solely on the handlebars to brace yourself against inertia.
  • Stopping distance includes thinking distance and braking distance. A dry road surface and tyres in good condition improve grip during braking, but do not in themselves reduce the time you take to recognise a hazard. A motorcycle's light weight does not guarantee that you stop sooner than a car.
  • Learn the feel of your brakes through progressive training. A spongy lever or a loss of effectiveness are not signs you should compensate for by applying ever more force without having the brakes checked. Do not set off with an unresolved safety fault. [DGT, using the brakes](https://www.dgt.es/muevete-con-seguridad/viaja-seguro/en-moto/)

8ABS and combined braking

A motorcyclist brakes before a branch in their lane, with the motorcycle upright, both wheels on the asphalt without skidding and the brake light illuminated.
The key idea

Know what your braking system does and its limits.

SystemWhat you must know
ABSRegulates pressure to prevent locking; does not create grip
CBS or combined brakingShares braking between brakes according to the model
Cornering ABSAlso considers lean angle; grip still limits braking

Remember

  • With working ABS, increase braking pressure firmly and gradually, then maintain the pressure needed.
  • Do not release the brake just because you feel normal ABS pulsing.
  • Without ABS, reduce pressure if your front wheel locks.
  • Once it turns again, reapply pressure according to grip.
  • Follow your model’s instructions.

Exam trap: Wrong: combined braking always prevents locking. Right: it shares braking between brakes but cannot guarantee this.

Read the full explanation
  • ABS detects a tendency for a wheel to lock and regulates braking pressure at the wheels it controls. It helps you maintain stability during braking, but does not create grip. You must know whether it acts on one or both wheels and recognise your model's operating indicators.
  • With ABS working, apply the brakes progressively and firmly during emergency braking, and maintain the necessary pressure. Do not pump the controls to imitate the system or release them simply because you feel its normal pulsing. Follow the motorcycle's specific instructions and maintain a safe path.
  • Without ABS, if the front wheel locks, you must reduce the pressure to allow it to turn again, then modulate braking pressure according to grip. Keeping it locked removes your ability to control the motorcycle and can cause a fall.
  • Combined braking, or CBS, distributes braking action between the brakes when you operate certain controls. The distribution and the control that activates each circuit depend on the system. You must not confuse it with ABS: combining braking does not guarantee that the wheels cannot lock. [DGT, safety systems](https://www.dgt.es/export/sites/web-DGT/.galleries/Images/conoce-la-dgt/que-hacemos/conocimiento-investigacion/Sistemas-de-Seguridad-para-Motocicletas_vr.pdf)
  • Cornering ABS uses additional information, such as lean angle, to adapt its intervention. Do not assume that every ABS has these functions or that they allow unlimited braking while leaning. No aid guarantees that you avoid falls or stop in a shorter distance on every surface. [DGT, ARAS](https://revista.dgt.es/es/reportajes/2025/12DICIEMBRE/1216-N276-SuplementoADAS-ARASMoto.shtml)

9Respond to an emergency

A helmeted motorcyclist brakes with the motorcycle upright in their lane before a fallen branch, with clear space between the motorcycle and the obstacle.
The key idea

When danger appears, brake early and look for safe space.

Remember

  • Close the throttle and look towards safe space.
  • On a straight, use both brakes according to their system.
  • On a manual motorcycle, coordinate the clutch to prevent stalling.
  • Do not delay braking to change down through every gear.
  • Before swerving, check there is room for your whole motorcycle.
  • If braking while leaning, increase pressure gradually according to grip.

Exam trap: Wrong: always straighten up on a bend. Right: reduce lean only when your path allows, without leaving the road or entering the oncoming lane.

Read the full explanation
  • When faced with a hazard, close the throttle, look towards a safe space and brake as soon as possible while maintaining control. In a straight line, adopt a stable position and apply both brakes according to their system. Waiting to choose a gear or staring at the obstacle uses up valuable stopping space.
  • On a manual motorcycle, coordinate the clutch to prevent stalling and stop the transmission from interfering with stopping. Your priority is to brake and maintain control; you must not delay braking to change down through every gear one by one. You do not need to lock the rear wheel deliberately to stabilise yourself either.
  • If you must swerve, check that your escape route is clear and wide enough for the whole motorcycle. A strong steering input while demanding heavy braking reduces your remaining grip margin. During supervised practice, learn to separate and coordinate slowing down and avoidance according to the space available.
  • On a bend, try to reduce your lean angle when your path allows it, to give yourself more braking margin. Do not automatically bring the motorcycle upright if this takes you into the opposite lane or off the carriageway. If you need to brake while leaning, do so progressively and adapt the force to the available grip.
  • A real emergency does not replicate the markings used in the test. There may be a vehicle behind you, an uneven road surface or an occupied escape route; assess the whole situation. After stopping, remain alert to traffic and move off again only when you can do so without creating another hazard.

10Gradients and slippery surfaces

A helmeted motorcyclist descends a wet road in the rain, with the motorcycle upright and its wheels inside the right-hand lane.
The key idea

Set your speed before slopes and surfaces with poor grip.

SituationWhat you should do
Unavoidable potholeSlow down beforehand; cross without braking, upright, with feet supported
RailsCross as close to a right angle as lane and traffic allow; stay upright
Metal railsAvoid sharp braking or acceleration; do not follow the groove
Mud or snowIf you can move safely, choose a gear avoiding jerks and wheelspin; continue only if you can maintain control
Covers or road paintKeep steady throttle and avoid sudden movements

Remember

  • On long descents, use a gear that slows you, adding both brakes as needed.
  • In rain, slow down earlier and leave more space.
  • Avoid slippery areas if you can do so safely within your lane.
  • If wet brakes still work poorly, stop safely and ask for help.
  • Cross rails as close to a right angle as possible, keeping your motorcycle upright.
  • For an unavoidable pothole, slow down beforehand and release the brakes while crossing.

Exam trap: Wrong: brake while crossing an unavoidable pothole. Right: slow down beforehand, release the brakes while crossing, and keep your motorcycle upright and arms flexible.

Read the full explanation
  • Before a long descent, select a gear that helps control your speed through engine braking. Supplement this with both brakes as necessary, avoiding overheating them through improper use. Do not descend in neutral or with the clutch held in continuously.
  • Change down smoothly, at a speed suitable for the gear you select. An abrupt downshift can destabilise the rear wheel; the brakes' ABS does not make every use of engine braking safe.
  • In rain or with little grip, reduce your speed earlier and allow more space. Operate the throttle, steering and brakes smoothly, even if you have ABS. Water can increase braking distance, but does not reduce the distance you travel during your reaction at the same speed and with the same response time.
  • When approaching wet road markings, drain covers, sand, oil or gravel, choose a line in advance that avoids the slippery area if you can do so safely within your lane. If you must cross it, adjust your speed on a surface with good grip and maintain the smallest lean angle compatible with your path. Over a cover or road marking, keep the throttle steady and avoid abrupt braking, acceleration or steering; gradually resume control inputs when you return to a surface with grip.
  • If the brakes get wet, their effectiveness can vary. When safe, check their response gently and follow the manufacturer's drying procedure without taking other traffic by surprise. If a fault persists, stop somewhere safe and request assistance; do not carry out abrupt tests in traffic.
  • If you cannot avoid a pothole, reduce your speed before reaching it and release the brakes as you cross it. Keep the motorcycle upright and your arms relaxed to follow the suspension's movement, with your feet firmly supported. Plan your path early so that you cross the uneven surface without a sudden last-minute steering movement or entering other road users' space. Your duty to adapt your speed to the condition of the road appears in the [RGC, art. 45](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a45).
  • Cross tram rails at an angle as close to a right angle as your lane and the traffic allow. Choose your line before you reach them and adjust your speed on the road surface beforehand; cross the metal with the motorcycle upright, without braking or accelerating abruptly on it. Avoid following the groove with a wheel or suddenly changing your path to obtain a greater angle. Protection against slippery surfaces and rails forms part of the A2-specific syllabus: [RGCond, Annex V.B.2.2.º.d) and f)](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#anv).
  • On mud or snow, if you can still proceed safely, keep your speed low and use a gear that delivers power without jerking or wheelspin. You must not always move off in second gear or insist on using the highest gear. If you cannot maintain control, seek a safe alternative and do not continue with insufficient grip.

11Prepare for the bend

A helmeted motorcyclist rides upright within the right lane and turns their head toward a right-hand bend on a rural road.
The key idea

Prepare your speed, gear and position before leaning.

In comparable conditionsWhat you must remember
Tighter bend at the same speedYou need more lean
Lower speedYou need less lean

Remember

  • Observe the bend’s entry and visible path.
  • Adapt your speed to grip and what you can see.
  • Choose your gear before leaning.
  • Leave room within your lane.
  • Keep observing as you move.
  • Keep your arms ready for small corrections.

Exam trap: Wrong: copy a racing line across the whole road. Right: stay in your lane and leave a safety margin.

Read the full explanation
  • Observe the entry, the visible course of the bend and its possible exit before deciding on your speed. A familiar bend can contain dirt, a stopped vehicle or a wet patch. You must be able to respond within the available space; confidence does not replace visibility or grip.
  • Adjust your speed and select the appropriate gear before leaning. You must enter with enough margin to maintain your path without relying on heavy braking. Too high a gear can give a poor response, while too low a gear can produce jerky engine braking or acceleration.
  • Assess the radius, surface, camber and width together. In comparable conditions, a tighter bend requires more lean at the same speed; reducing your speed reduces this requirement. Tyre width alone does not determine a safe angle for every motorcycle.
  • Choose your entry position within your lane without getting dangerously close to oncoming traffic or the edge. Do not copy a racing line that uses the whole road. On a public road, you need room for other people's mistakes, obstacles and changes in radius that you cannot see.
  • Do not turn the bend into a series of corrections by looking only at a nearby point. Update your observations as your view advances, and keep your arms ready for small corrections. Preparation means you have fewer urgent decisions about the controls to make during the turn.

12Countersteering and leaning

A rider wearing a helmet and protective clothing gently leans their motorcycle to the right through a bend, staying within their lane with both hands on the handlebars.
The key idea

Start leaning by gently pushing the grip on the side you want to lean towards.

SituationHow you steer
Road bendStart leaning with gentle pressure on the grip
Very slow manoeuvre in a tight spaceTurn the handlebars towards your path and coordinate your balance

Remember

  • To lean right, gently push the right grip forwards.
  • To lean left, gently push the left grip forwards.
  • Keep your arms flexible and look towards an exit you can use.
  • Learn this coordination with an instructor in controlled conditions.
  • You do not need to hang off or stick your knee out.

Exam trap: Wrong: keep the wheel pointing outwards throughout the bend. Right: countersteering starts or changes your lean.

Read the full explanation
  • Countersteering allows you to initiate or change your lean by applying gentle pressure to the handlebars. To lean to the right, push the right-hand grip slightly forwards; to lean to the left, push the left-hand grip. This initial action briefly steers in the opposite direction to your intended turn.
  • This does not mean holding the wheel forcibly towards the outside throughout the bend or making a large, sudden steering movement. Once you start leaning, follow your path with the necessary control inputs. Keep looking towards an exit you can use and keep your arms relaxed so that you do not restrict the motorcycle's response.
  • Learn this coordination with an instructor in controlled conditions before attempting to apply it consciously when faced with an obstacle. Familiarise yourself with your own motorcycle's response by practising small, precise and proportionate pressure on the appropriate grip. [DGT, countersteering, Tráfico magazine No. 93](https://revista.dgt.es/revista/hemeroteca/093%20TySV.pdf)
  • At very low speed, when manoeuvring in a tight space, you turn the steering towards your intended path, and balance requires different coordination of your body and the controls. Do not interpret advice for cornering on the road as a violent turn of the handlebars when manoeuvring at almost a standstill.
  • You do not need to hang off the motorcycle or touch the ground with your knee to ride correctly. Adopt a natural posture that moves with the motorcycle and preserves control and a safety margin. Your lean angle must reflect your speed, the bend's radius and grip; increasing the angle to show off reduces your safety reserve.

13Follow your line and complete the turn

A motorcyclist wearing a helmet and an orange jacket rides a green motorcycle around a right-hand bend, looking toward the exit with the motorcycle and their body inside their lane.
The key idea

Ride smoothly through the bend and keep within your space.

Remember

  • Keep your wheels, body and projecting parts within your lane.
  • Look ahead while continuing to check the surface.
  • Avoid sudden changes of throttle, gear or posture.
  • If the bend tightens, adjust your speed and path smoothly.
  • Brake gradually if needed, according to grip.
  • Accelerate out only when visibility, space and conditions allow.

Exam trap: Wrong: always accelerate out of a bend. Right: another bend, a queue or a speed limit may require you to slow down.

Read the full explanation
  • Throughout the bend, look as far ahead as the road layout allows, while continuing to scan the road surface. Avoid staring at the crash barrier or an oncoming vehicle. Keep your wheels, your body and any parts of the motorcycle that project outwards as you lean within your lane.
  • Use the throttle smoothly and avoid abrupt gear changes or shifts in weight. The tyre must provide lateral force for turning as well as the force needed to accelerate or brake. The more you demand of it for one task, the less grip may remain for another.
  • If the bend tightens, adjust your speed and line without panic or sudden movements. Ease off the throttle smoothly and brake progressively if necessary. There is no absolute technical prohibition on braking in a bend; the risk lies in demanding more grip than is available.
  • When you see that the exit is clear and have enough safety margin, progressively bring the motorcycle upright and open the throttle smoothly if appropriate. You do not have to accelerate out of every bend: a second bend, a traffic queue or a restriction may require you to maintain or reduce your speed.
  • On a series of bends, prepare for each one according to how far you can see, and do not sacrifice your safety margin for the next bend to exit the first one quickly. Make changes of lean smoothly and within your own space. If the motorcycle needs more width than is available, your speed or preparation is unsuitable.

14Position within the lane

A helmeted motorcyclist rides within their lane, leaving lateral clearance from two cars parked along the right-hand kerb on a village street.
The key idea

Choose your position according to visibility, road surface and traffic.

Remember

  • Keep a path others can predict.
  • Avoid staying hidden alongside cars or lorries.
  • Beside parked vehicles, leave space for doors and people.
  • Outside built-up areas, normally use the rightmost lane when several go your way.
  • Do not treat the line between lanes as your own lane.
  • On an authorised shoulder, keep a steady line and enough space to react.

Exam trap: Wrong: any traffic jam lets you use the shoulder. Right: you need authorisation and signs; it is not an ordinary lane.

Read the full explanation
  • Choose a position where you are visible, the road surface is suitable and you have space to react. No single position within the lane is always the safest: it changes with junctions, parked vehicles, dirt, wind and traffic. Keep a predictable line and avoid unnecessary repeated sideways movements.
  • Do not ride close alongside a car or lorry where you may be hidden from view. If you cannot see its mirrors or spend a long time alongside it, pay extra attention and find a position with more safety margin when possible. Seeing the driver does not prove that they have noticed you.
  • When riding beside parked vehicles, anticipate doors opening and people stepping out. Leave clearance and keep to a speed that allows you to stop; do not ride close to a row of vehicles just because the motorcycle is small enough. A gap wide enough for the handlebars may not give you enough room to react.
  • Outside built-up areas, where there are several lanes in your direction, normally use the lane furthest to the right, and use the others when appropriate without obstructing traffic. [RGC, art. 31](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a31) The motorcycle's size does not entitle you to ride permanently along the line between lanes or to use the arcén (hard shoulder) as a normal traffic lane. [RGC, art. 36](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a36)
  • If you use a hard shoulder authorised for traffic, keep a steady line and leave enough room to react to its users; the conditions for access and use are covered in «Using the road on your motorcycle», in the section «Hard shoulder authorised for use when traffic is stationary». [RGC, art. 36.3](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a36)

15Space to react

A helmeted motorcyclist rides behind an orange car, leaving a wide clear gap between them on a two-way road.
The key idea

Leave enough space to stop without hitting the vehicle ahead.

Remember

  • Adapt your distance to speed, grip and braking ability.
  • Leave more space in rain, on uneven roads, or with passengers or luggage.
  • If someone moves into your gap, restore it gradually.
  • Drop back from large vehicles if they block your view.
  • In tunnels, keep a steady pace and space to brake gradually.
  • When danger requires braking, do not delay to check behind.

Exam trap: Wrong: ride close to stop another vehicle entering. Right: leave braking space and gradually restore your gap if someone moves in.

Read the full explanation
  • Keep enough distance to stop without hitting the vehicle ahead if it brakes suddenly. Adapt this distance to your speed, grip and braking ability; a gap of two motorcycle lengths is not enough. Lateral clearance when overtaking does not replace this following distance. [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)
  • Increase your safety margin in rain, on uneven surfaces or when carrying a passenger or luggage. If another vehicle moves into the gap, progressively restore a useful following distance without braking sharply unnecessarily. Riding very close to prevent a car from moving in reduces your ability to handle an emergency.
  • If a large vehicle blocks your view of what is happening ahead, drop back far enough to regain visibility and time to react. Do not suddenly move out into the oncoming lane to look. A larger gap may allow you to spot a traffic queue earlier and brake with less urgency.
  • In a tunnel, maintain a steady pace and enough space to brake progressively; the minimum following distance is covered in «Speed and distances on a motorcycle», in the section «Tunnels and underpasses», and how it applies in different lanes is covered in «Using the road on your motorcycle», in the section «Lanes and following distances in tunnels». [RGC, art. 95.6](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a95)
  • Before slowing down considerably, check behind when possible and warn others with the appropriate signal. If you need to brake because of danger, do not delay braking to complete a prolonged check. Your brake light informs the driver behind, but does not guarantee their response. [RGC, art. 109](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a109)
  • If you expect to be overtaken, keep a steady line and help the other vehicle return to the lane with room to spare. The conditions under which you must leave extra space for vehicles to move in are explained in «Speed and distances on a motorcycle». [RGC, art. 54](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a54)

16Overtake with a planned way back

A motorcyclist overtakes a car on the left on a straight rural road, with ample lateral clearance and open space ahead to return to the right lane.
The key idea

Overtake only when you can finish and return safely.

Remember

  • Check space, visibility, restrictions and traffic behind before signalling.
  • Do not automatically follow another motorcycle.
  • With a load, reassess the acceleration available.
  • Do not overtake at marked pedestrian crossings or near them.
  • When passing another vehicle, keep a smooth path.
  • Return with enough space and signal; if danger appears, abandon the overtake safely.

Exam trap: Wrong: follow another motorcycle without checking. Right: check space, visibility and a safe return without cutting anyone up.

Read the full explanation
  • Before overtaking, check the space ahead and behind, visibility, any prohibitions and whether you can return to your lane without cutting anyone off. Signal before moving out. Do not automatically follow another motorcycle: its manoeuvre does not prove that you also have enough distance to complete yours. [RGC, art. 84](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a84)
  • Select a gear that gives sufficient response without jerking, and keep your distance before moving out. Riding too close to the vehicle reduces your view and safety margin. With a passenger or luggage, reassess the acceleration available: do not assume you can complete the overtake in less space.
  • As you pass another vehicle, keep a smooth line and allow for its projecting parts; the lateral clearance required when riding your motorcycle is covered in «Motorcycle manoeuvres», in the section «Lateral clearance on your motorcycle». [RGC, art. 85.5](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a85)
  • When overtaking cyclists and other vulnerable road users, plan the whole manoeuvre, including your return to the lane; the required clearances and speed reduction are covered in «Motorcycle manoeuvres», in the section «Overtaking vulnerable road users», and those for passing immobilised vehicles are covered in «Passing obstacles and immobilised vehicles» in the same module. [RGC, art. 85.4](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a85) [RGC, art. 88.1](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a88)
  • Do not overtake at marked pedestrian crossings or near them. Travelling very slowly does not authorise this manoeuvre. Where overtaking is permitted and appropriate, return gradually with enough space and signal; if a hazard prevents you from completing the manoeuvre, abandon it safely without forcing others to take action. [RGC, art. 87](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a87)
  • Plan a line with enough room to pass and return without abrupt turns; the side on which you must overtake and the exceptions are covered in «Motorcycle manoeuvres», in the section «Overtaking on the left and exceptions». [RGC, art. 82](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a82)

17Wind and large vehicles

A helmeted motorcyclist with both hands on the handlebars overtakes a truck in the left lane, leaving space within the lane, with wind depicted by curved lines and leaves beside the road.
The key idea

Expect wind when you leave a sheltered area.

Remember

  • Adjust your speed before leaving a lorry’s shelter.
  • Leave room within your lane.
  • Hold the handlebars firmly but flexibly.
  • Correct sideways wind pressure gradually.
  • Keep your view and access to the controls.

Exam trap: Wrong: correct a gust with a large, sudden movement. Right: correct smoothly and leave room.

Read the full explanation
  • Before leaving the shelter of a lorry or a wind barrier, adjust your speed and keep room within your lane. Hold the handlebars firmly but flexibly, and correct for sideways wind pressure progressively, without large, sudden movements.
  • When overtaking a large vehicle, keep a smooth line as you move from the sheltered area into the exposed area. Maintain your view and access to the controls; do not adopt a posture that limits your ability to make corrections. Wind hazards and the effects of the fairing and luggage are covered in «Motorcycle risks and prevention».

18Autopistas and autovías (motorways and dual carriageways)

A helmeted motorcyclist rides along a motorway acceleration lane, with a large gap behind a car travelling in the adjacent lane.
The key idea

On motorways, prepare each entry, lane change and exit.

Remember

  • Use the acceleration lane to match your speed to traffic.
  • Join without forcing others to brake.
  • Check mirrors and blind spots before changing lanes.
  • Control the throttle when overtaking and leave enough space to finish.
  • Slow down mainly in the deceleration lane.
  • If you miss your exit, continue to another.

Exam trap: Wrong: your acceleration gives you priority when joining. Right: choose a gap without forcing others to brake.

Read the full explanation
  • Use the acceleration lane to build up a speed compatible with the traffic and the space available. Observe early, signal and choose a gap without forcing others to brake. The acceleration of an A2 motorcycle does not give you priority when joining traffic.
  • Ride predictably, check your mirrors and check your blind spot before changing lanes. At high speed, a vehicle that seems far away can approach quickly. Avoid repeated lane changes and staying in other drivers' blind spots.
  • Control the throttle when overtaking and keep enough margin to finish without demanding all the acceleration available; the applicable limit is covered in «Speed and distances on a motorcycle», in the section «Autopistas and autovías outside built-up areas», and observing it during the manoeuvre is covered in «You must also observe speed limits when overtaking». [RGC, art. 48](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a48)
  • Prepare for your exit in advance, move into the appropriate lane and slow down mainly in the deceleration lane. If you miss an exit, continue to another one: do not improvise a turn, reverse or brake in a way that surprises other traffic. You can arrive later and still stay in control.
  • In a traffic queue, move sideways smoothly and check the space around you when forming the emergency corridor; its layout is covered in «Using the road on your motorcycle», in the section «Emergency corridors and riding in snow». [RGC, art. 32](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a32)

19Ride in a group without competing

Three motorcyclists wearing helmets and protective clothing follow a curve in single file, spaced apart and within the right-hand lane of a rural road.
The key idea

In a group, keep your distance and make your own decisions.

SituationHow you should position yourself
Wide straight with a staggered formationKeep your following distance and room for corrections
Bend or narrow sectionMove into single file and respect your companion’s space

Remember

  • Agree on the route, stops and meeting point before setting off.
  • Match the pace to the least experienced rider.
  • Check for yourself before joining traffic or overtaking.
  • If separated, ride safely to the agreed meeting point.
  • If leading, regroup somewhere everyone can stop safely.

Exam trap: Wrong: overtake because the leader does. Right: check for yourself that you can overtake safely.

Read the full explanation
  • On wide straight sections, if you adopt a staggered formation within the lane, maintain your following distance and leave room to make corrections. On bends or narrow sections, change to single file so that you can follow your line without encroaching on another rider's space.
  • Before setting off in a group, agree on the route, stops and a meeting point in case you become separated; choose a pace that suits the least experienced rider. Make your own observations before joining traffic or overtaking. If you lose contact, continue at a safe pace to the agreed point; the leader must regroup everyone somewhere you can stop safely.

20Prepare your passenger

A helmeted rider and passenger travel on a motorcycle in the right-hand lane, with the passenger seated behind, holding the rider’s waist and keeping her feet on the footrests.
The key idea

Explain how your passenger can ride without making control harder.

Remember

  • Check you have an approved passenger seat and footrests.
  • Tell them to sit behind you, astride, with their feet supported.
  • Explain where to hold on without limiting your movements.
  • Agree to get on and off only when stopped and you are ready.
  • Ask them to keep their feet supported even when you stop.
  • On bends, ask them to follow your lean without anticipating or exaggerating it.

Exam trap: Wrong: ask your passenger to lean the opposite way. Right: ask them to follow your lean naturally.

Read the full explanation
  • Before carrying a passenger, check that the motorcycle has an authorised passenger seat and the corresponding supports. Your passenger must sit behind you, astride the motorcycle, with their feet on the footrests. Age limits and the other conditions for carrying passengers are covered in «Passengers and loads on motorcycles». [RGC, art. 12](https://www.boe.es/buscar/act.php?id=BOE-A-2003-23514#a12)
  • Before moving off, explain where to hold on and how to behave. Your passenger can use the grab handles provided or hold your waist without restricting your movements. They must not lean on the controls or rely solely on gripping with their knees while leaving their hands loose.
  • Agree when your passenger is to get on and off, always with the motorcycle stationary and you ready to support it. Prevent them from getting on without warning you or moving suddenly as you approach a stop. Seat height and mass distribution can make balancing at low speed more difficult.
  • Your passenger must keep their feet on the footrests while you are moving and also when you stop, for as long as they remain a passenger. You are responsible for supporting the motorcycle. They must not try to help by unexpectedly putting their feet out or turn to look behind at a moment when this destabilises you and the motorcycle.
  • On bends, your passenger must lean naturally with you, without leaning in advance, exaggerating the lean or leaning the opposite way. Explain that they must keep their body steady and look in the direction of travel. A calm, predictable passenger allows you to pay more attention to your line.

21Adapt handling to the load

A motorcycle carrying a rider and passenger travels in the right-hand lane of a rural road, keeping a large gap behind the car ahead.
The key idea

With a load, adapt manoeuvres to your motorcycle’s actual response.

Remember

  • With a passenger or luggage, prepare to brake earlier.
  • Leave more room for joining traffic and overtaking.
  • Accelerate, change gear and brake gradually.
  • On bends, adjust your speed and stay within your lane.

Exam trap: Wrong: extra weight always requires a wider line. Right: adjust your speed and keep your path within your lane.

Read the full explanation
  • With a passenger or luggage, plan your braking earlier and allow more margin when joining traffic or overtaking. Adapt the manoeuvre to how the loaded motorcycle actually responds.
  • Accelerate, change gear and brake progressively to avoid jolting your passenger. On bends, adjust your speed and keep your line within the lane; the extra weight does not mean you always need to take a wider line.
  • Luggage positioning, securing and limits are covered in «Passengers and loads on motorcycles»; tyre pressure and suspension adjustments according to the manufacturer's instructions are covered in «Motorcycle mechanics and maintenance».

22Test circuit: preparation and slow circuit

A rider wearing a helmet and protective clothing rides a motorcycle on a practice ground, with both wheels inside a narrow strip of asphalt bounded by two parallel white lines.
The key idea

Prepare your equipment and complete the slow circuit with balance and precision.

0.25 mWidth of B
6 mLength of B
3.75 mPole spacing in A
30 km/hMinimum in E
Slow circuit manoeuvreWhat you must do
BUse first gear at low, steady speed; strip approximately 8 metres from start
AUse first gear at low speed; five poles, starting on the right
EAccelerate, change to second and reach at least 30 km/h before braking

Remember

  • Adjust your helmet and protective clothing before starting.
  • Be ready for the safety checks selected for your test.
  • Retract the stand and walk beside your motorcycle, moving it without engine power.
  • Link B, A and E under control.
  • Remember that the annex sets no maximum time for B, A and E.
  • In E, stop without crossing the line or stalling.

Exam trap: Wrong: apply 25 seconds to the slow circuit. Right: that maximum applies to C, D and F combined.

Read the full explanation
  • Before the manoeuvres, put on and adjust your helmet and protective clothing. You must be able to check the tyres, brakes, steering, emergency stop switch if fitted, drive chain, oil level, headlights, reflectors, indicators and horn, according to the random selection made for the test. Then retract the stand, move the motorcycle by walking alongside it and keeping it balanced without using the engine, and start the engine to prepare for the manoeuvres. [RGCond, Annex V.B.3.2](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#anv)
  • The balance circuit links B, A and E. The annex sets no maximum time for B, A and E; the maximum of 25 seconds applies only to C, D and F combined. The duration depends on the characteristics and difficulty of each manoeuvre. In B, you must ride in first gear at a low, steady speed along a strip 0.25 metres wide and 6 metres long, situated approximately 8 metres from the start. Look ahead along the strip and make gentle corrections. [RGCond, Annex VI.C.2 and C.4](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#anvi)
  • In A, you weave in first gear at low speed between five marker poles spaced 3.75 metres apart, starting to the right of the first. Stay within the marked area and keep clear of the poles. Anticipate each turn by looking towards the next gap. [RGCond, Annex VI.C.4](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#anvi)
  • In E, you accelerate progressively, change into second gear and reach at least 30 km/h; you then stop precisely within the indicated space, without crossing the line or stalling the engine. Coordinate the clutch and brakes, avoiding a sudden application of the brakes at the end with the steering turned. [RGCond, Annex VI.C.4](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481)
  • Practise consistency and control rather than racing to finish the slow circuit. You must learn to correct a slight loss of balance without automatically putting your feet down. The low-speed control you practise here also helps in queues, when parking and on tight urban turns.

23Test circuit: speed, avoidance and braking

A helmeted motorcyclist holds the motorcycle upright and stopped before the white line marking the braking area on a closed practice track with cones.
The key idea

Link speed, avoidance and braking with precision and control.

30 km/hMinimum in C
50 km/hD and braking in F
25 secondsCombined maximum for C-D-F
Fast circuit manoeuvreYour speed and action
CReach at least 30 km/h before weaving around five cones; maintain that speed
DReach at least 50 km/h at the first passage and maintain it while swerving
FMake an emergency stop from 50 km/h

Remember

  • Link C, D and F within their combined time limit.
  • In C, start to the left of the first cone.
  • In D, avoid touching the markers and return to your original line.
  • In F, brake straight and stop without crossing the line.
  • Practise these tests in a prepared enclosed area.
  • In real traffic, adapt your manoeuvre to grip, visibility and rules.

Exam trap: Wrong: you have 25 seconds for each manoeuvre. Right: the maximum covers C, D and F combined.

Read the full explanation
  • The skills and speed circuit links C, D and F. Combine the pace needed to meet the overall maximum time stated in the previous section with precision and control. Prepare for each manoeuvre by looking ahead and avoid rushed movements. [RGCond, Annex VI.C.2](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#anvi)
  • In C, you weave around five cones, starting to the left of the first, after reaching at least 30 km/h and without reducing that speed during the slalom. Look towards the next gap and link smooth changes of direction; do not keep looking at the cone you have just passed. [RGCond, Annex VI.C.4](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481)
  • In D, you must reach the first marked passage at a minimum of 50 km/h, swerve without reducing that speed and return to your original line. You must not touch any of the markers. Practise directing your gaze and coordinating your steering without replacing the avoidance manoeuvre with sudden braking. [RGCond, Annex VI.C.4](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481)
  • In F, you perform an emergency stop from 50 km/h and stop in the marked area without crossing the line, keeping a straight line and maintaining control. Hard braking must be coordinated; it does not mean skidding to show that you have applied enough force. [RGCond, Annex VI.C.4](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481)
  • These speeds and markings apply to a specially prepared site. You must not repeat the avoidance manoeuvre at that speed between cars or use improvised cones on a road open to traffic. In real traffic, you choose your speed and manoeuvre according to visibility, grip and the rules, without a path cleared in advance.

24On-road riding and practical assessment

A motorcyclist wearing protective gear and a helmet intercom rides alone on a motorcycle in the right-hand lane of a road.
The key idea

On the road, show that you observe, decide and control your motorcycle safely.

25 minutesNormal minimum road riding
TestFault combinations that make you fail
CircuitOne disqualifying; two serious; one serious and two minor; four minor
RoadOne disqualifying; two serious; one serious and five minor; ten minor

Remember

  • Ride without a passenger and receive instructions through the intercom.
  • If you cannot follow an instruction in time, keep a safe, legal path.
  • Adjust mirrors and check controls before setting off.
  • Wear an approved helmet, gloves and boots protecting your ankles.
  • Wear a motorcycle jacket with back, shoulder and elbow protection.
  • Wear motorcycle trousers with knee protection.

Exam trap: Wrong: count preparation within the 25 minutes. Right: the normal minimum excludes preparation, checks and results; the test may be interrupted or suspended.

Read the full explanation
  • In the on-road test, you ride the motorcycle without a passenger and receive the examiner's instructions through the prescribed intercom. You must follow them safely; if you cannot carry out a manoeuvre in time, keep to a legal, safe line rather than improvising. [RGCond, art. 55](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481)
  • Before setting off, adjust your mirrors, check the controls and put on the required equipment: an approved helmet, gloves, a motorcycle jacket and trousers with protection at least on the back, shoulders and elbows in the jacket and on the knees in the trousers, and boots that protect your ankles. Do not confuse clothing suitable for taking the test with ordinary street clothes. [RGCond, Annex VI.C.1](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481)
  • On the road, you are assessed on your observations and decisions as well as your handling: joining traffic without forcing others to give way, using the correct lane position, maintaining distance, adapting your speed and respecting priority. You do not need to exaggerate head movements; you must make real checks without losing your line.
  • The normal minimum riding time on roads open to traffic for A2 is 25 minutes, unless the test is interrupted or suspended. Preparation, preliminary checks and communication of the results do not count towards this time. Do not confuse minutes of on-road riding with seconds on the fast circuit. [RGCond, Annex VI.C.2](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481)
  • On the test circuit, you fail with one disqualifying fault, two serious faults, one serious fault and two minor faults, or four minor faults. On the road, you fail with one disqualifying fault, two serious faults, one serious fault and five minor faults, or ten minor faults. A serious danger can be enough on its own; passing is not simply a matter of counting small mistakes. [RGCond, Annex VI.C.3](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481)

25Technique with tricycles and sidecars

A helmeted rider drives a motorcycle with a right-hand sidecar around a bend on a rural road, keeping the outfit upright and all three wheels on the asphalt.
The key idea

Adapt your steering to the tricycle, sidecar or light quadricycle.

15 kWMaximum for included tricycles
Vehicle and actionWhat you must remember
Sidecar: you accelerateYou tend to pull towards the sidecar
Sidecar: you brake only with the motorcycle’s brakesYou tend to pull away from the sidecar
Light quadricycleIt does not lean; steer towards the bend and slow down before entering
Loaded light quadricycleAllow for its width and reduced sideways stability

Remember

  • On non-tilting tricycles or rigid sidecars, steer towards the bend.
  • Learn the vehicle’s width and response in a suitable enclosed area.
  • On tilting tricycles, use the technique suited to their design.
  • With a sidecar, gently correct sideways pulls using the steering.
  • Slow before bends towards the sidecar: its wheel may lift, especially when empty.
  • Light quadricycles do not lean: steer into the bend and slow down first.

Exam trap: Wrong: braking only with the motorcycle’s brakes pulls towards the sidecar. Right: you tend to pull away from the sidecar.

Read the full explanation
  • On a non-tilting tricycle or a motorcycle with a rigidly attached sidecar, steer into the bend: the combination does not lean like a two-wheeled motorcycle. Familiarise yourself with its width and handling in a suitable enclosed area before riding on the road; tilting tricycles require the technique appropriate to their design.
  • When you accelerate with a sidecar, the combination tends to veer towards the sidecar; when you brake using only the motorcycle brakes, it tends to veer towards the opposite side. Apply the controls progressively and compensate gently with the steering; the response changes with the load and braking system.
  • On a bend towards the sidecar, its wheel can lift, especially if it is empty. Slow down before entering the bend and ride smoothly, leaving a safety margin to keep all wheels on the ground; practise with specialist training.
  • The A2 licence includes A1 and therefore motor tricycles up to 15 kW. Check the scope of the licence in «Motorcycle licences and documentation». [RGCond, arts. 4 and 5](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#a5)
  • A light quadricycle does not lean: steer into the bend, slow down before entering it and take account of its width and reduced lateral stability when loaded; its limits and licence requirements are covered in «Essential definitions for riding a motorcycle». The A2 licence includes AM through A1. [RGCond, art. 5.2.a and b](https://www.boe.es/buscar/act.php?id=BOE-A-2009-9481#a5)

Emergency braking in a straight line

Aim for the greatest reduction in speed compatible with stability and grip.

  1. Identify the hazard, close the throttle and look towards a safe space.
  2. Keep the motorcycle aligned and coordinate both brakes, increasing the force without an abrupt initial application.
  3. With working ABS, maintain the necessary pressure without pumping; without ABS, modulate your braking to avoid locking the wheels.
  4. On a manual motorcycle, coordinate the clutch to avoid stalling and finish with stable support.

Negotiating a bend

Prepare beforehand and keep a safety margin throughout the turn.

  1. Observe the course of the road and its surface, and adjust your speed and gear before leaning.
  2. Choose your position within your lane and look along the visible path ahead.
  3. Begin leaning smoothly, coordinating the handlebars and your posture without sudden movements.
  4. Keep a margin of grip in reserve; brake progressively if a real need arises.
  5. With a clear exit, bring the motorcycle upright and accelerate gently only if appropriate.

Setting off with a passenger

Make the behaviour of the motorcycle and passenger predictable.

  1. Check the seat, footrests, load and adjustments specified by the manufacturer.
  2. Explain how to hold on, keep feet supported and lean naturally, and agree how to get on and off.
  3. Hold the motorcycle stationary while your passenger gets on and confirm that they are ready.
  4. Accelerate and brake smoothly, and allow greater safety margins when joining traffic and overtaking.

Remembering the two parts of the closed-course test

Associate each manoeuvre with its purpose and speed.

  1. Prepare the motorcycle and demonstrate that you can keep it balanced while walking alongside it, without engine power.
  2. Link B and A at low speed in first gear, followed by E in second gear at at least 30 km/h before braking.
  3. Link C at a minimum of 30 km/h, D at a minimum of 50 km/h and F with braking from 50 km/h.
  4. Complete C, D and F within a combined maximum of 25 seconds, maintaining accuracy and control.

Check what you know

Real questions from the bank on this topic. Pick an answer to see the explanation.

1When carrying an authorised passenger on your motorcycle, what possible effect of the additional load must you consider when braking?
2Does an A1 licence authorise you to ride a motorcycle with a sidecar?
3When carrying a passenger on your motorcycle, to make driving safer, you must tell them to...
4With no signs setting a different limit, on which urban road does Article 50 set a general 20 km/h limit for a motorcycle?

Finished this module?

Mark it as read and you will see your progress on the theory list.

Next module