Correct answer
In the circuit reservoir identified by the manufacturer, using the specified marks or method.
In the hydraulic circuit reservoir identified for that vehicle, using the level marks or checking method specified by the manufacturer. Its location is not universal: it may be separate or shared with the brake circuit. Do not always look beside the pedal or confuse a filler cap with a level indicator. Use the specified fluid and investigate abnormal losses.
Practice more C1 licence questions
A self-check with exam-style questions on Mechanics and maintenance. Free, no signup.
All options
Always in a reservoir next to the air filter, without consulting the manual.
In the circuit reservoir identified by the manufacturer, using the specified marks or method.
In the clutch disc itself, which stores hydraulic fluid.
Editorial status: editorially approved. This status does not certify legal review. Report a correction
Keep studying
Related questions
- The engine oil dipstick is used to check...
- What does the word “TUBELESS” written on the side of the tyre indicate?
- In a cooling circuit designed to operate under pressure, what effect does increased pressure have on the boiling temperature of the same coolant?
- Between sunset and sunrise, you drive a lorry on a sufficiently lit road through a built-up area. Besides position lights, which headlights must you use?
- If you are driving your lorry downhill, can you put it in neutral to save fuel?
- An electrical accessory does not work while the others operate normally. The manual says to check its overcurrent protection first. Which component should you check?