Correct answer
Yes, and check that the level is between the maximum and minimum marks.
Yes, follow the manufacturer’s interval and procedure and check that the level remains within the indicated range. Do not overfill or wait until steering becomes difficult. Use the specified fluid and checking conditions, and check for leaks. This applies to hydraulic steering; not every steering system has such a reservoir.
Practice more C1 licence questions
A self-check with exam-style questions on Mechanics and maintenance. Free, no signup.
All options
It should only be checked if an abnormal increase in the effort required to turn the steering wheel is noticed.
Yes, and check that the reservoir is overflowing.
Yes, and check that the level is between the maximum and minimum marks.
Editorial status: editorially approved. This status does not certify legal review. Report a correction
Keep studying
Related questions
- What general term covers changes such as joining traffic, moving into another lane or turning, which alter the vehicle’s normal progress?
- Which of the following parameters affects the adjustment of the driver's seat?
- To compare and adjust lorry tyre pressure to the recommended cold value for its load, when should it be checked?
- During normal driving while maintaining steering control, the vehicle persistently pulls to one side without an apparent road or wind cause. What should you do?
- With the same oil and engine speed, other factors being equal, which oil condition can favour lower pressure by reducing its viscosity?
- If a warning appears in a C1 or C truck indicating a major fault, the correct action is to: