Correct answer
One third of the vehicle's length at the front and one third of the vehicle's length at the rear.
One third of the vehicle’s length at the front and one third at the rear: approximately 1.67 metres at each end of a 5-metre vehicle. This rule concerns indivisible-length loads in vehicles used exclusively for goods. The 2-metre front and 3-metre rear limits apply to vehicles longer than 5 metres, not exactly 5 metres. Other limits still apply; protect protruding ends and use required markings, including V-20 for rear overhang and additional lighting under the applicable conditions.
Practice more C licence questions
A self-check with exam-style questions on Safe loading. Free, no signup.
All options
One third of the vehicle's length at the front and one third of the vehicle's length at the rear.
Two metres at the front and three metres at the rear.
Nothing.
Editorial status: editorially approved. This status does not certify legal review. Report a correction
Keep studying
Related questions
- A motor vehicle with four wheels or more, designed and built for the transport of goods, which has a cab not integrated with the rest of the bodywork and a maximum of nine seats, is a…
- What is the name of the part that closes and protects the moving parts of the engine from underneath?
- Does loading or unloading goods permit a lorry to park in a second row?
- If you are driving a lorry carrying out a special transport operation, what alcohol level per litre of exhaled air must you not exceed?
- As a general rule, the maximum height of a lorry with its load will be ...
- Which rule must be observed when loading or unloading?