Correct answer
One third of the vehicle's length at the front and one third of the vehicle's length at the rear.
One third of the vehicle’s length at the front and one third at the rear: approximately 1.67 metres at each end of a 5-metre vehicle. This rule concerns indivisible-length loads in vehicles used exclusively for goods. The 2-metre front and 3-metre rear limits apply to vehicles longer than 5 metres, not exactly 5 metres. Other limits still apply; protect protruding ends and use required markings, including V-20 for rear overhang and additional lighting under the applicable conditions.
Practice more C1 licence questions
A self-check with exam-style questions on Safe loading. Free, no signup.
All options
Nothing.
Two metres at the front and three metres at the rear.
One third of the vehicle's length at the front and one third of the vehicle's length at the rear.
Editorial status: editorially approved. This status does not certify legal review. Report a correction
Keep studying
Related questions
- A three-axle rigid lorry measures 12 m and travels under the general length limit, with no authorisation or exception to exceed it. May it carry a rear-projecting load that increases its total length beyond 12 m?
- What is the name given to the mass obtained by adding the standard mass of a 75-kilogram driver to the tare weight of the lorry?
- In a partially filled liquid tanker, can liquid movement during braking or turning affect stability?
- A conventional diesel lorry with two single axles carries 12 tonnes on its driven axle. Under what conditions may it be driven?
- In a conventional headlamp with a bulb and reflector, how should light be directed to fulfil its lighting function?
- The mass obtained by adding to the lorry's tare weight the standard mass of a driver of 75 kilograms is called....