Correct answer
Consult the model’s manual and identify the clutch circuit reservoir and cap.
Consult the model’s manual and identify the reservoir and cap belonging to the clutch circuit. Their location cannot be deduced merely from the clutch controls being hydraulic: it depends on vehicle design. Do not confuse this filling point with the air filter, engine oil or another circuit. Use only the fluid and procedure specified by the manufacturer.
Practice more D licence questions
A self-check with exam-style questions on Mechanics and maintenance. Free, no signup.
All options
Consult the model’s manual and identify the clutch circuit reservoir and cap.
Use the engine-oil cap to top up the clutch circuit.
Assume that it is always on the air-filter bracket.
Editorial status: editorially approved. This status does not certify legal review. Report a correction
Keep studying
Related questions
- During a routine check, when should you measure bus tyre pressure to compare it with the recommended cold inflation pressure?
- If the bus's clutch is operated hydraulically, should you check the fluid level?
- If, when your bus undergoes a technical inspection, the result is 'unfavourable', giving a period of one month to repair it, during that time...
- Before driving a bus, it is advisable to check:
- In a combustion-engine vehicle, when traffic and road conditions allow, which driving style helps reduce fuel consumption?
- What is the broad lateral surface of the tyre visible between its tread and the area seated on the rim called?