Correct answer
Engage first gear and properly chock the vehicle.
Leave first gear engaged and properly chock the vehicle using purpose-made wheel chocks. Stones and other improvised objects must not be used as chocks. On a downhill slope engage reverse; use the parking position where the gearbox provides one and it applies. For vehicles over 3,500 kg on a significant slope, the rule permits proper chocks or the prescribed support of a steering wheel against a kerb: these are alternatives, rather than both being compulsory. With no usable kerb here, use the chocks and remove them from the road when moving off. Also stop the engine and disconnect the starting system when leaving the driving position.
Practice more C licence questions
A self-check with exam-style questions on Safe loading. Free, no signup.
All options
Engage first gear and properly chock the vehicle.
Chock the vehicle with stones and engage first gear.
Engage reverse gear and properly chock the vehicle.
Editorial status: editorially approved. This status does not certify legal review. Report a correction
Keep studying
Related questions
- To drive with correct tyre inflation pressure, you must ...
- If you are driving a lorry, must you know how to position and secure the load?
- A rigid four-axle lorry with conventional diesel propulsion is not carrying roundwood or operating under a special authorisation. None of its drive axles has dual tyres. Subject to technical and axle limits, which general MAM limit in Spain’s vehicle regulation table applies?
- In order to drive, the maximum height your lorry may reach will generally be...
- What is the general definition of a closed box body in the use classification, without adding the specific features of a silo or tipper?
- What is the function of the intercooler?