B+E licence questions
B+ESafety devices·20 questions
Safety devices questions — B+E licence
20 exam-style Safety devices questions for the B+E licence with correct answer and explanation. Practice free, no signup.
- Before setting off with a B+E trailer, it is especially important to check that:
- Driving a B+E combination with poorly adjusted mirrors:
- Before moving off with a trailer, what must you check in the coupling system?
- On a trailer, the auxiliary safety elements of the coupling must:
- Before hitching a trailer to a B+E towing vehicle, a basic safety measure is to:
- To drive a B+E combination safely, it is advisable to keep especially clean:
- In a trailer of a B+E combination, to help stability the load should be:
- In a test for the B+E licence, the examiner may check that the applicant is wearing:
- Before driving with a trailer fitted with a safety cable or device, you must check that:
- Before starting a long descent with a B+E combination, it is advisable to:
- If the trailer hides the towing vehicle's rear registration plate, the combination must carry:
- Which pre-trip check specifically concerns a trailer combination’s coupling?
- Before setting off with a trailer, which check concerns its lighting and signalling?
- Before setting off with a B+E combination, it is essential to check:
- In a B+E combination, the trailer load must be:
- Which specific checks help verify that the trailer is properly coupled and its lights work before departure?
- Before driving a B+E combination with an inertia-braked trailer equipped with a breakaway cable, what must you check?
- A car tows a light trailer with MAM not exceeding 750 kg. Which registration plate must be visible at the trailer’s rear?
- Before uncoupling a trailer you must make sure that:
- The braking distance of a B+E combination:
Other B+E licence topics
How to ace the safety devices questions on the B+E licence
Safety devices questions are usually among the highest-failure areas in the B+E licence exam. Each of the 20 exam-style questions here includes the options, the correct answer and an explanation of why it's correct.
The most effective way to master this topic is to alternate syllabus reading with question practice. Start by reading the full topic, then click into any question to study it in detail. Failed questions enter the smart-review queue until you master them.
Frequently asked questions about safety devices on the B+E licence
- How many safety devices questions are in the B+E licence question bank?
- Our exam-style question bank includes 20 safety devices questions for the B+E licence. Each comes with the correct answer and explanation.
- How should I study safety devices for the B+E licence exam?
- The B+E test has 20 questions. Use this bank to practise safety devices with explanations, and combine topic review with full mock exams.
- What are the most common safety devices mistakes?
- Three typical causes: 1) misreading prompts with decisive keywords ("always", "never", "except", "only", "at least") — they flip the correct answer; 2) switching correct answers in the final review due to self-induced doubt; 3) studying only by topic without full simulations, which penalises block-switching speed.
- How should I practise safety devices to prepare for the B+E licence?
- Alternate three modes: first study the full topic syllabus; then practise the 20 exam-style safety devices questions until you understand the logic of each; finally launch full B+E-licence simulations (20 questions, max 2 wrong) to train block-switching under pressure.