Correct answer
Because the braking on the wheels of the same axle is not exactly equally effective.
It may be due to unequal braking effectiveness at the wheels of the same axle. Pulling while braking can have several causes, including uneven wear or a brake fault, and needs professional inspection. It does not by itself establish that wheel alignment is the required repair. Engine oil and supposed injection-system pressure into power steering do not explain the proposed cause in the other options.
Practice more C licence questions
A self-check with exam-style questions on Safe loading. Free, no signup.
All options
Because the oil level is low and is not sending enough pressure to one of the brake cylinders.
Because the braking on the wheels of the same axle is not exactly equally effective.
Because the valve that regulates injection is sending excess pressure to the power steering.
Editorial status: editorially approved. This status does not certify legal review. Report a correction
Keep studying
Related questions
- When leaving the driving position and parking on a noticeable 8% gradient, which vehicles must additionally be properly secured with chocks or the prescribed kerb support under Article 92.3?
- Under the current general regulatory limit, what is the maximum permitted mass on a single driven axle of a lorry?
- In public goods transport, what MAM threshold applies to heavy vehicles for an MDP authorisation?
- An ordinary rigid lorry, without a trailer or special authorisation, travels loaded. What is its regulatory maximum length, measured between the outermost points of the vehicle and load?
- Before topping up engine oil, where should you identify the correct filler cap or filling point?
- Drivers of goods vehicles with a Maximum Authorised Mass (MAM) exceeding 3,500 kg must not drive with a blood alcohol level higher than...