Correct answer
MAM exceeding 3,500 kg.
A MAM exceeding 3,500 kg. MDP authorisation permits transport using heavy vehicles; ROTT Article 109 sets access requirements for public goods transport in vehicles that can exceed 3.5 tonnes MAM. The threshold concerns maximum authorised mass, not payload or actual weight on a journey. This alone does not obtain an authorisation: the other applicable requirements must also be met.
Practice more C licence questions
A self-check with exam-style questions on Safe loading. Free, no signup.
All options
MAM exceeding 3,500 kg.
MAM at or below 3,500 kg as the heavy-vehicle criterion.
A payload exceeding 6 tonnes regardless of MAM.
Editorial status: editorially approved. This status does not certify legal review. Report a correction
Share this question
Keep studying
Related questions
- An ordinary rigid lorry, without a trailer or special authorisation, travels loaded. What is its regulatory maximum length, measured between the outermost points of the vehicle and load?
- Before topping up engine oil, where should you identify the correct filler cap or filling point?
- Drivers of goods vehicles with a Maximum Authorised Mass (MAM) exceeding 3,500 kg must not drive with a blood alcohol level higher than...
- The manufacturer permits jump-starting a negative-earth vehicle using a source of the same nominal voltage and the specified connection points. What principle must be followed when connecting the auxiliary source?
- An ordinary seven-metre rigid lorry used exclusively for goods carries indivisible-length concrete beams. Outside the special-transport regime, what general limit must its total length including the load comply with?
- In a conventional liquid-cooling system with a correctly working thermostat, what restricts coolant flow to the main radiator while the engine is cold?