Correct answer
A rapid, unexplained drop in gauge pressure.
A rapid, unexplained drop in air pressure may indicate a leak. An air-brake circuit uses compressed air, not the fluid level in a hydraulic master cylinder. Stored pressure should not fall to zero simply when the pedal is released. Follow the manufacturer’s checks and tolerances and repair faults before using the vehicle.
Full explanation free, no sign-up.
Practice more C1 licence questions
A self-check with exam-style questions on Safe loading. Free, no signup.
All options
Stable stored pressure during the check.
A pressure increase caused by outside air entering through the leak.
A rapid, unexplained drop in gauge pressure.
The real exam in English is a translation of the Spanish original; compare both here.
Show the Spanish original
En una comprobación conforme al fabricante, el camión está inmovilizado, el motor parado y no se está accionando el freno. ¿Qué puede indicar una fuga en el circuito neumático de frenos?
- Una presión almacenada estable durante la comprobación.
- Un aumento de presión causado por aire exterior que entra por la fuga.
- Una caída rápida e injustificada de la presión indicada por el manómetro.(Correct answer)
Editorial status: editorially approved. This status does not certify legal review. Report a correction
Keep studying
Related questions
- In a conventional charging system with a working warning lamp, the lamp illuminates at ignition-on and goes out after starting. What does it normally indicate if it stays off while driving?
- What is the function of the drain valves on a pneumatic brake system’s compressed-air reservoirs?
- When the load being carried may produce dust, is it compulsory to cover the lorry's body effectively?
- After immobilising a 5,500 kg MAM lorry on a significant uphill gradient, the driver leaves the seat. In addition to the parking brake and first gear (or P), how can it be secured if no suitable chocks are available and there is a kerb?
- You park a 6,000 kg MAM lorry with a manual gearbox on a 10% slope and will leave the driving position. You have already stopped the engine, disconnected the starting system and taken the other necessary precautions. Which additional set of immobilisation measures must you apply?
- What is the purpose of the bleeder in a hydraulic braking circuit?