Correct answer
At the hydraulic circuit reservoir identified in the vehicle manual.
At the hydraulic circuit reservoir specified by the manufacturer. Its position depends on the model: it may be remote from the master cylinder or use another specified arrangement. Do not assume it is always next to the pedal, engine or air filter. Confirm the correct reservoir and fluid specification in the manual before opening or topping up; a falling level may require inspection for leaks or faults.
Practice more C1 licence questions
A self-check with exam-style questions on Safe loading. Free, no signup.
All options
Always on top of the engine by the pressure plate, without consulting the manual.
At the hydraulic circuit reservoir identified in the vehicle manual.
Always on the air-filter support, regardless of model.
Editorial status: editorially approved. This status does not certify legal review. Report a correction
Keep studying
Related questions
- A driver of a lorry with a Maximum Authorised Mass (MAM) of 10,000 kg used for the transport of goods must not exceed what alcohol level in order to drive that vehicle?
- In the air supply of a pneumatic braking system, what is the purpose of the discharge valve that limits maximum pressure?
- The braking distance of a C1 or C truck:
- When loading or unloading goods on the road is unavoidable and applicable stopping, parking and municipal rules are observed, on which side of the vehicle should it be done where possible?
- An ordinary four-axle rigid lorry without a trailer, special authorisation or exception allowing the general dimensions to be exceeded travels with its load. What is its general maximum length including the load?
- What is the name of a motor vehicle with four wheels or more, designed and built to carry goods, with a maximum of nine seats including the driver, whose cab is integrated into the structure?