Correct answer
Check that it is between MIN and MAX.
Periodically check that the level is between MIN and MAX, following the manufacturer’s procedure. Do not fill the tank to overflowing or wait for an abnormal temperature rise before checking. Do not open a hot pressurised system: allow the engine to cool when required by the procedure. If topping up is needed, use the specified coolant and investigate leaks or repeated level drops.
Full explanation free, no sign-up.
Practice more C licence questions
A self-check with exam-style questions on Mechanics and maintenance. Free, no signup.
All options
Check that it is between MIN and MAX.
Check that the tank is overflowing.
Check it only when the engine becomes abnormally hot.
The real exam in English is a translation of the Spanish original; compare both here.
Show the Spanish original
Su camión tiene un vaso de expansión del refrigerante con marcas MIN y MAX. En las condiciones de comprobación indicadas por el fabricante, ¿cómo debe revisar su nivel?
- Compruebe que el depósito esté rebosando.
- Compruebe que se encuentre entre MIN y MAX.(Correct answer)
- Revíselo solo cuando el motor se caliente anormalmente.
Editorial status: editorially approved. This status does not certify legal review. Report a correction
Keep studying
Related questions
- A liquid-cooled lorry has an expansion tank marked MIN and MAX. When checked under manufacturer instructions, how should the level be?
- A lorry has an expansion tank marked MIN and MAX. When checking coolant with a cold engine according to the manufacturer’s instructions, must you inspect the level?
- A lorry has hydraulic power steering with a reservoir marked MIN and MAX. Should its fluid level be checked?
- When checking a lorry’s engine oil level with the dipstick under manufacturer instructions, on what ground should it be parked?
- To check a lorry’s oil level with the dipstick, its manufacturer specifies checking before starting, with a cold engine and the vehicle on level ground. What should you do?
- How is the normal operating temperature of an engine’s coolant determined?